8192283 FESTO

Document overview

  • PDF pages: 2

Technical content

Page 1

Spindle axis ELGD-BS-KF-80-100-0H-20P

Part number: 8192283

PDF page 1 diagram
PDF page 1 diagram

General operating condition

Data sheet

Feature Value
Working stroke 100 mm
Size 80
Stroke reserve 0 mm
Reversing backlash 150 µm
Screw diameter 16 mm
Spindle pitch 20 mm/U
Mounting position Any
Guide Recirculating ball bearing guide
Structural design Electromechanical linear axis with ball screw
Motor type Stepper motor Servo motor
Spindle type Ball screw drive
Symbol 00991211
Position sensing For inductive proximity sensors
Max. acceleration 15 m/s²
Max. rotational speed 5000 rpm
Max. speed 1.67 m/s
Repetition accuracy ±0.01 mm
Duty cycle 100%
LABS (PWIS) conformity VDMA24364 zone III
Degree of protection IP30
Ambient temperature 0 °C ... 60 °C
Impact energy in the end positions 0.002 J
Note on the impact energy in the end positions At maximum speed of the reference run of 0.01 m/s
2nd moment of area Iy 1213000 mm⁴
2nd moment of area Iz 2052000 mm⁴
No-load torque at maximum travel speed 0.218 Nm
No-load torque at minimum travel speed 0.075 Nm
Max. force Fy 3906 N
Max. force Fz 3913 N
Max. force Fy total axis 2291 N
Max. force Fz total axis 2500 N
Fy with theoretical service life of 100 km (from a guide perspective only) 17576 N
Fz with theoretical service life of 100 km (from a guide perspective only) 17576 N
Max. torque Mx 95 Nm

8/12/24 - Subject to change - Festo SE & Co. KG

1/2

Page 2

Feature Value
Max. torque My 42 Nm
Max. torque Mz 42 Nm
Max. moment Mx total axis 95 Nm
Max. moment My total axis 42 Nm
Max. moment Mz total axis 42 Nm
Mx with theoretical service life of 100 km (from a guide perspective only) 422 Nm
My with theoretical service life of 100 km (from a guide perspective only) 162 Nm
Mz with theoretical service life of 100 km (from a guide perspective only) 162 Nm
Distance between slide surface and guide center 62 mm
Max. radial force on actuator shaft 500 N
Max. feed force Fx 2650 N
Torsion moment of inertia It 405000 mm⁴
Mass moment of inertia JH per meter of stroke 0.39016 kgcm²
Mass moment of inertia JL per kg of payload 0.00101 kgcm²
Mass moment of inertia JO 0.10619 kgcm²
Feed constant 20 mm/U
Reference service life 5000 km
Maintenance interval Life-time lubrication
Moving mass 990 g
Basic weight with 0 mm stroke 3147 g
Additional weight per 10 mm stroke 90 g
Dynamic deflection (load moved) 0.05% of axis length, maximum 0.5 mm
Static deflection (load at standstill) 0.1 % of axis length
Interface code, actuator T46
Material of end caps Aluminum gravity die-cast, painted
Profile material Wrought aluminum alloy, anodized
Note on materials RoHS-compliant
Cover strip material High-alloy stainless steel
Drive cover material Aluminum gravity die-cast, painted
Slide carriage material Steel
Guide rail material Steel
Slide material Wrought aluminum alloy
Spindle nut material Steel
Spindle material Steel

8/12/24 - Subject to change - Festo SE & Co. KG

2/2