8192263 FESTO

Document overview

  • PDF pages: 2

Technical content

Page 1

Spindle axis ELGD-BS-KF-60-400-0H-10P

Part number: 8192263

PDF page 1 diagram
PDF page 1 diagram

General operating condition

Data sheet

Feature Value
Working stroke 400 mm
Size 60
Stroke reserve 0 mm
Reversing backlash 150 µm
Screw diameter 12 mm
Spindle pitch 10 mm/U
Mounting position Any
Guide Recirculating ball bearing guide
Structural design Electromechanical linear axis with ball screw
Motor type Stepper motor Servo motor
Spindle type Ball screw drive
Symbol 00991211
Position sensing For inductive proximity sensors
Max. acceleration 15 m/s²
Max. rotational speed 6667 rpm
Max. speed 1.11 m/s
Repetition accuracy ±0.01 mm
Duty cycle 100%
LABS (PWIS) conformity VDMA24364 zone III
Degree of protection IP30
Ambient temperature 0 °C ... 60 °C
Impact energy in the end positions 0.001 J
Note on the impact energy in the end positions At maximum speed of the reference run of 0.01 m/s
2nd moment of area Iy 508600 mm⁴
2nd moment of area Iz 685700 mm⁴
No-load torque at maximum travel speed 0.14 Nm
No-load torque at minimum travel speed 0.047 Nm
Max. force Fy 2200 N
Max. force Fz 2200 N
Max. force Fy total axis 930 N
Max. force Fz total axis 1300 N
Fy with theoretical service life of 100 km (from a guide perspective only) 9208 N
Fz with theoretical service life of 100 km (from a guide perspective only) 9208 N
Max. torque Mx 37 Nm

8/12/24 - Subject to change - Festo SE & Co. KG

1/2

Page 2

Feature Value
Max. torque My 15 Nm
Max. torque Mz 15 Nm
Max. moment Mx total axis 36 Nm
Max. moment My total axis 15 Nm
Max. moment Mz total axis 15 Nm
Mx with theoretical service life of 100 km (from a guide perspective only) 157 Nm
My with theoretical service life of 100 km (from a guide perspective only) 60 Nm
Mz with theoretical service life of 100 km (from a guide perspective only) 60 Nm
Distance between slide surface and guide center 60 mm
Max. radial force on actuator shaft 230 N
Max. feed force Fx 1550 N
Torsion moment of inertia It 52300 mm⁴
Mass moment of inertia JH per meter of stroke 0.15716 kgcm²
Mass moment of inertia JL per kg of payload 0.02533 kgcm²
Mass moment of inertia JO 0.0635 kgcm²
Feed constant 10 mm/U
Reference service life 5000 km
Maintenance interval Life-time lubrication
Moving mass 555 g
Basic weight with 0 mm stroke 1774 g
Additional weight per 10 mm stroke 54 g
Dynamic deflection (load moved) 0.05% of axis length, maximum 0.5 mm
Static deflection (load at standstill) 0.1 % of axis length
Interface code, actuator T42
Material of end caps Aluminum gravity die-cast, painted
Profile material Wrought aluminum alloy, anodized
Note on materials RoHS-compliant
Cover strip material High-alloy stainless steel
Drive cover material Aluminum gravity die-cast, painted
Slide carriage material Steel
Guide rail material Steel
Slide material Wrought aluminum alloy
Spindle nut material Steel
Spindle material Steel

8/12/24 - Subject to change - Festo SE & Co. KG

2/2