8191912 FESTO
Document overview
- PDF pages: 2
Technical content
Page 1
Ball valve unit VZBE-A-11/2-T-63-T-2-F0507-V15V15-PB80
Part number: 8191912


General operating condition
Data sheet
| Feature | Value |
| Structural design | Quarter turn actuator |
| Actuation type | Pneumatic |
| Sealing principle | Soft |
| Mounting position | Any |
| Type of mounting | Line installation |
| Fitting connection | 1 1/2 NPT |
| Switching position indication | Slot direction = flow direction |
| Flange hole pattern | F0507 |
| Nominal width DN | 40 |
| Valve function | 2/2 |
| Flow direction | Reversible |
| Operating pressure | 0.55 MPa ... 0.8 MPa |
| Operating pressure | 5.5 bar ... 8 bar |
| Operating pressure | 79.75 psi ... 116 psi |
| Nominal pressure of fitting PN | 63 |
| Breakaway torque at differential pressure, nominal pressure, fitting PN | 30 Nm |
| Based on norm | ASME B1.20.1 ISO 5211 |
| Symbol | 00992011 |
| Medium | Compressed air as per ISO 8573-1:2010 [-:-:-] Inert gas Water – no water vapor Neutral liquids Other flow media on request |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| Temperature of medium | -10 °C ... 200 °C |
| Flow rate Kv | 247 m³/h |
| Max. surface temperature of assembly | +105°C...+280°C T4...T2 |
| Explosion group of assembly | IIC, IIIC |
| Note on materials | RoHS-compliant |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Housing material | Cast stainless steel |
| Material number of housing | 1.4408 |
4/6/26 - Subject to change - Festo SE & Co. KG
1/2
Page 2
| Feature | Value |
| Seat seal material | PTFE |
| Seals material | FPM PTFE |
| Ball material | Cast stainless steel |
| Material number for ball | 1.4408 |
| Shaft material | High-alloy stainless steel |
| Product weight | 6080 g |
| Explosion prevention and protection | Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) |
| Explosive ambient temperature | -10°C <= Ta <= +80°C |
| Corrosion resistance class (CRC) | 1 - Low corrosion stress |
4/6/26 - Subject to change - Festo SE & Co. KG
2/2