8191895 FESTO

Document overview

  • PDF pages: 2

Technical content

Page 1

Ball valve unit VZBE-A-1/4-T-63-T-2-F0304-V15V15-PA10

Part number: 8191895

PDF page 1 diagram
PDF page 1 diagram

General operating condition

Data sheet

Feature Value
Structural design Quarter turn actuator
Actuation type Pneumatic
Sealing principle Soft
Mounting position Any
Type of mounting Line installation
Fitting connection 1/4 NPT
Switching position indication Slot direction = flow direction
Flange hole pattern F0304
Nominal width DN 8
Valve function 2/2
Flow direction Reversible
Operating pressure 0.55 MPa ... 0.8 MPa
Operating pressure 5.5 bar ... 8 bar
Operating pressure 79.75 psi ... 116 psi
Nominal pressure of fitting PN 63
Breakaway torque at differential pressure, nominal pressure, fitting PN 7 Nm
Based on norm ASME B1.20.1 ISO 5211
Symbol 00991921
Medium Compressed air as per ISO 8573-1:2010 [-:-:-] Inert gas Water – no water vapor Neutral liquids Other flow media on request
Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media Operation with oil lubrication possible (required for further use)
Temperature of medium -10 °C ... 200 °C
Flow rate Kv 19 m³/h
Max. surface temperature of assembly +105°C...+280°C T4...T2
Explosion group of assembly IIC, IIIC
Note on materials RoHS-compliant
LABS (PWIS) conformity VDMA24364 zone III
Housing material Cast stainless steel

4/6/26 - Subject to change - Festo SE & Co. KG

1/2

Page 2

Feature Value
Material number of housing 1.4408
Seat seal material PTFE
Seals material FPM PTFE
Ball material Cast stainless steel
Material number for ball 1.4408
Shaft material High-alloy stainless steel
Product weight 1485 g
Explosion prevention and protection Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
Explosive ambient temperature -10°C <= Ta <= +80°C
Corrosion resistance class (CRC) 1 - Low corrosion stress

4/6/26 - Subject to change - Festo SE & Co. KG

2/2