8189595 FESTO

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 2

Technical content

VABX-A-S-EL-E12-APA-SHUH-XL Part number: 8189595 General operating condition Data sheet Feature Value Size 1 Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27 Connection position At the side Reverse polarity protection yes Diagnostics via LED Diagnostics per module Diagnose per internal communication Load supply undervoltage PL Logic supply undervoltage PS Valve manifold design Valve sizes can be mixed Max. no. of solenoid coils 120 Module parameters Configuration of voltage monitoring, load supply PL Response in error state Compatible with Valve terminal VTUX-A-S Dimensions W x L x H 35.2 mm x 117.2 mm x 56.1 mm Fuse protection (short circuit) Internal electronic fuse per channel Inductive protective circuit Installed Intrinsic current consumption at nominal operating voltage for electronics/sensors typically 27 mA Intrinsic current consumption at nominal operating voltage load typically 13 mA Note regarding operating voltage SELV/PELV fixed power supplies required Note voltage drop Power consumption at 24 VDC 0.65 W Nominal operating voltage DC for electronics/sensors 24 V Nominal operating voltage DC load 24 V Power failure buffering 10 ms Electrical isolation of outputs between channel - internal communication yes Potential separation between the supply voltages electronics/sensor technology and load/valves yes Protocol AP Contamination level 2 Permissible voltage fluctuations for electronics/sensors ± 25 % Permissible voltage fluctuations load ± 10% Power supply, function Incoming electronics/sensors and load Voltage forwarding, function Outgoing electronics/sensors and load Undervoltage load/valves (diagnostic message) ≤21.1 V Certification RCM compliance mark 4/29/26 - Subject to change - Festo SE & Co. KG 1/2

CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive UKCA marking (see declaration of conformity) To UK RoHS instructions Corrosion resistance class (CRC) 2 - Moderate corrosion stress LABS (PWIS) conformity VDMA24364-B1/B2-L Storage temperature -20 °C ... 70 °C Relative air humidity 5 - 95 % Protection against direct and indirect contact PELV SELV Degree of protection IP65 Overvoltage category II Ambient temperature -5 °C ... 50 °C Nominal altitude of use above sea level <= 2000 m NHN Max. installation height 3500 m Max. tightening torque for wall mounting 6 Nm Product weight 120.7 g Electrical actuation AP interface Communication interface, protocol AP Sub-base mounting type With through-hole Type of mounting with through-hole for M5 screw Pneumatic connection 1 For 15 mm cartridge Pneumatic connection 5 for 15 mm cartridge Note on materials RoHS-compliant Material of sub-base PA-reinforced Cover material PBT-reinforced Seals material NBR Sleeve material High-alloy stainless steel Clip material High-alloy stainless steel Nut material High-alloy stainless steel 4/29/26 - Subject to change - Festo SE & Co. KG 2/2