8189593 FESTO

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 2

Technical content

VABX-A-S-EL-E12-API-SHUH-XL Part number: 8189593 General operating condition Data sheet Feature Value Size 1 Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27 Communication interface, connection pattern 00995937 Connection position At the side Reverse polarity protection yes Diagnostics via LED Diagnostics per module Diagnose per internal communication Load supply undervoltage PL Logic supply undervoltage PS Valve manifold design Valve sizes can be mixed Max. no. of solenoid coils 150 Module parameters Configuration of voltage monitoring, load supply PL Response in error state Compatible with Valve terminal VTUX-A-S Dimensions W x L x H 45.6 mm x 117.4 mm x 53.9 mm Fuse protection (short circuit) Internal electronic fuse per channel Inductive protective circuit Installed Intrinsic current consumption at nominal operating voltage for electronics/sensors typically 27 mA Intrinsic current consumption at nominal operating voltage load typically 13 mA Note regarding operating voltage SELV/PELV fixed power supplies required Note voltage drop Power consumption at 24 VDC 0.65 W Max. power supply 2 x 4 A (external fuse required) Nominal operating voltage DC for electronics/sensors 24 V Nominal operating voltage DC load 24 V Power failure buffering 10 ms Electrical isolation of outputs between channel - internal communication yes Potential separation between the supply voltages electronics/sensor technology and load/valves yes Protocol AP Contamination level 2 Permissible voltage fluctuations for electronics/sensors ± 25 % Permissible voltage fluctuations load ± 10% Power supply, function Incoming electronics/sensors and load Power supply, type of connection Plug 4/29/26 - Subject to change - Festo SE & Co. KG 1/2

Power supply, connection technology M8x1, A-coded as per EN 61076-2-104 Power supply, number of pins/wires 4 Power supply, connection pattern 00991171 Voltage forwarding, function Outgoing electronics/sensors and load Voltage forwarding, connection type Socket Voltage forwarding, connection technology M8x1, A-coded as per EN 61076-2-104 Voltage forwarding, number of pins/wires 4 Voltage forwarding, connection pattern 00991872 Undervoltage load/valves (diagnostic message) ≤21.1 V Certification RCM compliance mark KC characters KC EMC CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive UKCA marking (see declaration of conformity) To UK RoHS instructions Corrosion resistance class (CRC) 2 - Moderate corrosion stress LABS (PWIS) conformity VDMA24364-B1/B2-L Storage temperature -20 °C ... 70 °C Relative air humidity 5 - 95 % Protection against direct and indirect contact PELV SELV Degree of protection IP65 Note on degree of protection Unused connections sealed Overvoltage category II Ambient temperature -5 °C ... 50 °C Nominal altitude of use above sea level <= 2000 m NHN Max. installation height 3500 m Max. tightening torque for wall mounting 6 Nm Product weight 150 g Electrical actuation AP interface Max. cable length 50 m Communication interface, function System communication XF10 IN / XF20 OUT Communication interface, connection type 2x socket Communication interface, connection technology M8x1, D-coded as per EN 61076-2-114 Communication interface, number of pins/wires 4 Communication interface, protocol AP Communication interface, shielding yes Cable outlet Straight Sub-base mounting type With through-hole Type of mounting with through-hole for M5 screw Pneumatic connection 1 For 15 mm cartridge Pneumatic connection 5 for 15 mm cartridge Note on materials RoHS-compliant Material of sub-base PA-reinforced Cover material PA-reinforced Seals material NBR Film material Polyester Sleeve material High-alloy stainless steel Clip material High-alloy stainless steel Nut material High-alloy stainless steel 4/29/26 - Subject to change - Festo SE & Co. KG 2/2