8177443 FESTO

Document overview

  • PDF pages: 2

Technical content

Page 1

Shut-off valve VBOC-L2-E-S7-P-M12-G18-E

Part number: 8177443

PDF page 1 diagram

General operating condition

Data sheet

Feature Value
Valve function 2/2, closed, monostable
Selection of additional function Exhaust air one-way flow control function
Pneumatic connection 1 G1/8
Pneumatic connection 2 G1/8
Actuation type Pneumatic
Type of mounting Screw-in With external thread
Nominal flow rate in flow control direction standardized according to ISO 8778 170 l/min
Nominal flow rate in non-return direction standardized according to ISO 8778 150 l/min ... 200 l/min
Standard flow rate in flow control direction 0.6->0 MPa (6->0 bar, 87- >0 psi) to ISO 8778 310 l/min
Standard flow rate in non-return direction at 0.6->0 MPa (6->0 bar, 87->0 psi) to ISO 8778 300 l/min ... 400 l/min
Operating pressure 0.05 MPa ... 1 MPa
Operating pressure 0.5 bar ... 10 bar
Ambient temperature -5 °C ... 60 °C
Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
UKCA marking (see declaration of conformity) To UK RoHS instructions
Mounting position Any
Selection of additional function 2 Manual exhaust
Special features Resistant to welding spatter
Type of seal on screwed plug Sealing ring
Manual override Detenting
Reset method Mechanical spring
Pilot air supply port External
Manual exhaust function Non-detenting
Symbol 00997366
Measuring principle Inductive
Switching element function N/C contact

4/6/26 - Subject to change - Festo SE & Co. KG

1/2

Page 2

Feature Value
Rotatability 360 deg/continuous swiveling not permissible
Sensor reverse polarity protection For all electrical connections
Note on forced dynamization Current information on this issue can be found in Technical Report V
Switching position sensing Normal position with sensor
Switch-off pressure 0.05 MPa ... 0.2 MPa
Switch-on pressure 0.15 MPa ... 0.4 MPa
Pneumatic off range 0.04 MPa
Pilot pressure MPa 0.2 MPa ... 1 MPa
Pilot pressure 2 bar ... 10 bar
Pilot pressure psi 29 psi ... 145 psi
Switching time off 15 ms
On switching time 8 ms
Nominal operating voltage DC 24 V
Switching output PNP
Information on operating and pilot media Operation with oil lubrication possible (required for further use)
Corrosion resistance class (CRC) 2 - Moderate corrosion stress
LABS (PWIS) conformity VDMA24364 zone III
Suitability for the production of Li-ion batteries Suitable for battery production with reduced Cu/Zn/Ni values (F1a)
Temperature of medium -5 °C ... 60 °C
Pilot medium Compressed air as per ISO 8573-1:2010 [7:4:4]
Nominal tightening torque 6 Nm
Tolerance for nominal tightening torque ± 20%
Permissible actuation moment, adjusting screw 1 Nm
Product weight 68 g
DC sensor operating voltage range 10 V ... 30 V
Sensor short circuit protection yes
Sensor idle current ≤10 mA
Max. output current, sensor 200 mA
Sensor voltage drop ≤3 V
Electrical connection 1, function Switching output
Electrical connection 1, connection type Cable with plug
Electrical connection 1, connection technology M12x1 A-coded as per EN 61076-2-101
Electrical connection 1, number of pins/wires 4
Electrical connection 1, occupied pins/wires 3
Electrical connection for input 1, connection pattern 00991168
Cable length 0.3 m
Pilot air port 12 G1/8
Note on materials RoHS-compliant
Seals material HNBR NBR TPE-U(PU)
Hollow bolt material Wrought aluminum alloy
Material of cable sheath PVC
Knurled nut material Wrought aluminum alloy
Material of adjusting screw High-alloy stainless steel
Swivel joint material Wrought aluminum alloy
Sensor holder material High-alloy stainless steel
Locking nut material high-alloy stainless steel

4/6/26 - Subject to change - Festo SE & Co. KG

2/2