8176191 FESTO

Document overview

  • PDF pages: 2

Technical content

Page 1

Rotary gripper module EHMD-50-RE-GE-15

Part number: 8176191

General operating condition

Data sheet

Feature Value
Size 50
Rotation angle Infinite
Stroke per gripper jaw 15 mm
Controllable stroke range per gripper jaw 0 mm ... 15 mm
Reversing backlash 800 µm
Step angle with full step 1.8 deg
Step angle full step, rotation 1.8 deg
Step angle tolerance ±5%
Stepping angle tolerance, rotation ±5 %
Number of gripper jaws 2
Mounting position Any
Structural design Electric rotary actuator Electric gripper drive
Mode of operation Electric parallel gripper
Mode of operation, rotation Hybrid stepper motor
Gear ratio 1:1
Position sensing Rotation: motor encoder Gripping: motor encoder
Gripper function Parallel
Motor type Stepper motor
Homing Rotation: encoder index Gripping: fixed stop block
Rotor position sensor Incremental encoder
Rotor position sensor interface RS422 TTL A/B channels + zero index
Rotor position sensor measuring principle Optical
Max. output speed 240 rpm
Max. speed 0.025 m/s
Max. homing speed 0.005 m/s
Max. positioning speed per gripper jaw 25 mm/s
Max. gripping speed per gripper jaw 10 mm/s
Duty cycle 100%
Insulation protection class B
Max. current consumption <60 mA
Max. current consumption, rotation <60 mA
Nominal operating voltage DC 24 V
Nominal operating voltage DC, rotation 5 V

8/13/24 - Subject to change - Festo SE & Co. KG

1/2

Page 2

Feature Value
DC nominal voltage 24 V
Winding inductance phase 2.8 mH
Winding inductance phase, rotation 2.3 mH
Phase winding resistance 2 Ohm
Winding resistance phase, rotation 0.83 Ohm
Pulses per revolution 500
Pulses per revolution, rotation 500
Nominal current per phase 0.5 A
Nominal current per phase, rotation 2.8 A
Certification RCM compliance mark
CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
UKCA marking (see declaration of conformity) To UK instructions for EMC
Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
LABS (PWIS) conformity VDMA24364 zone III
Storage temperature -20 °C ... 70 °C
Relative air humidity 0 - 85 % Non-condensing
Degree of protection IP20
Ambient temperature 18 °C ... 28 °C
Gripping force per gripper jaw 18 N ... 67 N
Gripping force at 25% nominal current 12 N ... 22 N
Gripping force at nominal current 61 N ... 71 N
Motor holding torque 0.115 Nm
Holding torque motor, rotation 1 Nm
Mass moment of inertia 0.038 kgcm²
Mass moment of inertia, rotation 0.51 kgcm²
Max. output torque 1 Nm
Maximum torque on gripper jaw, Mx static 3.5 Nm
Maximum torque on gripper jaw, My static 5 Nm
Maximum torque on gripper jaw, Mz static 5 Nm
Maximum rated load 0.5 kg
Feed constant 2.3 mm/U
Permissible axial shaft load 15 N
Permissible radial shaft load 0 N
Product weight 1255 g
Electrical connection 1, function 2x motor
Electrical connection 1, connection type Plug
Electrical connection 1, connection technology PTSM
Electrical connection 1, number of pins/wires 8
Electrical connection for input 1, connection pattern 00997539
Electrical connection 2, function 2x encoder
Electrical connection 2, connection type Plug
Electrical connection 2, connection technology JST-ZH
Electrical connection 2, number of pins/wires 16
Electrical connection 2, connection pattern 00997540
Type of mounting With dovetail slot
Note on materials RoHS-compliant
Cover material PA-reinforced
Housing material Wrought aluminum alloy, anodized

8/13/24 - Subject to change - Festo SE & Co. KG

2/2