CQP_18 SCHURTER
Document overview
- PDF pages: 2
Technical content
Page 1
Fuseholder Blocks & Clips
https://www.schurter.com /PG02
Heavy Duty Fuse Clip, 6.3x32 mm, 600 VAC/VDC, 32 A
Solder THT version tin-plated
Solder THT version silver-plated
600 VAC/DC · 32 A (UL)
Description
- Solder mounting Unique Selling Proposition - Unique 600 VAC/VDC and 32 A - Minimal power loss due to strong clamping force
Technical Data Fuse-Link
6.3 x 32 mm
Mounting
PCB
Terminal
Solder THT
Rated Voltage
600 VAC/DC
Rated current
32 A (UL)
Admissible Ambient Air Temp. -55 °C to 155 °C ¹⁾
Copper alloy, silver-plated / tin-plated ¹⁾
Material: Terminals Storage Conditions
0 °C to 60 °C, max. 70% r.h.
1) Details see table of variants
Approvals and Compliances
CQP
See below: Approvals and Compliances
Applications
- Photovoltaic - Applications for high currents and voltages - Equipment with three-phase supply (400 VAC) References Fuseholder to A12FA 660V; FSF 6.3x32; FST 6.3x32; SA 6.3x32; SHF 6.3x32; SHT 6.3x32; SP 6.3x32; SPT 6.3x32; SUT 6.3x32 Weblinks pdf datasheet, html-datasheet, General Product Information, Packaging details, Distributor-Stock-Check, Detailed request for product, Microsite
Soldering Methods
Wave Soldering Profile
Solderability
245 °C / 3 sec acc. to IEC 60068-2-20, Test Ta, method 1
Resistance to Soldering Heat 260 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 1A ≤ 10 mΩ at 20 mV
Contact Resistance
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals
Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: CQP
Approval Logo
Certificates
Certification Body
UL Approvals
UL
Product standards Product standards that are referenced
Organization
Design
Standard
Designed according to
UL 4248-1
Designed according to
CSA C22.2 no. 4248.1
Description
UL File Number: E39328
Description
Fuseholder general requirements
Fuseholder general requirements
Fuses
Page 2
CQP
Application standards
Application standards where the product can be used
Organization
Design
Standard
Designed for applications acc.
IEC/UL 60950
Compliances
The product complies with following Guide Lines
Identification
Details
Initiator
CE declaration of conformity
SCHURTER AG
RoHS
SCHURTER AG
China RoHS
SCHURTER AG
REACH
SCHURTER AG
Dimension [mm]
8.2 mm
7.1

All Variants

Packaging Unit
Bulk (1000 pcs.)
Fuses
Fuseholder Blocks & Clips
https://www.schurter.com /PG02
Description
IEC 60950-1 includes the basic requirements for the safety of information technologyequipment.
Description
The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.
EU Directive RoHS 2011/65/EU
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.
±0.1 1.8

Drilling diagram
The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.