8005003 FESTO

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 2

Technical content

Part number: 8005003 Data sheet Feature Value Size of valve actuator 0180 Flange hole pattern F07 F10 Swivel angle 92 deg Depth shaft connection 24.8 mm Type code DAPS Standard connection for valve ISO 5211 Cushioning No cushioning Mounting position Any Mode of operation Double-acting Design Scotch yoke system Position sensing None Closing direction Clockwise closing Symbol 00991265 Valve connection conforms to standard VDI/VDE 3845 (NAMUR) Safety integrity level (SIL) Up to SIL 2 high demand mode Up to SIL 2 low demand mode Operating pressure 1 bar ... 8.4 bar Nominal operating pressure 0.56 MPa Nominal operating pressure 5.6 bar CE marking (see declaration of conformity) as per EU explosion protection directive (ATEX) Explosion prevention and protection Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) ATEX category gas II 2G ATEX category for dust II 2D Type of ignition protection for gas Ex h IIC T6...T3 Gb X Type of (ignition) protection for dust Ex h IIIC T85°C...T200°C Db X Explosive ambient temperature -20°C <= Ta <= +60°C Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4] Information on operating and pilot media Operation with oil lubrication possible (required for further use) Corrosion resistance class (CRC) 2 - Moderate corrosion stress Ambient temperature -20 °C ... 80 °C Torque at nominal operating pressure and 0° swivel angle 180 Nm Torque at nominal operating pressure and 50° swivel angle 90 Nm 8/9/21 - Subject to change - Festo AG & Co. KG 1/2

Torque at nominal operating pressure and 90° swivel angle 135 Nm Air consumption at 6 bar per cycle 0°-nominal swivel angle-0° 8.4 l Product weight 6000 g Shaft connection T22 Pneumatic connection G1/8 Note on materials RoHS-compliant Cover material Wrought aluminum alloy Seals material FPM NBR PUR Housing material Wrought aluminum alloy Material of screws High-alloy steel Shaft material High-alloy steel Material number for shaft 1.4305 8/9/21 - Subject to change - Festo AG & Co. KG 2/2