8000 ETC1

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Catch Us on the Web! www.cotorelay.com E-Mail us: sales@cotorelay.com22 DIP RDIP RDIP RDIP RDIP REEDEEDEEDEEDEED R R R R RELAYSELAYSELAYSELAYSELAYS The 8000 Series is ideally suited to the needs of Automated Test Equipment, Instrumentation, Data Acquisition, and Process Control requirements. The specification tables allow you to select the appropriate relay for your particular application. If your requirements differ from the selection options, please consult your local representative or Coto’s Factory to discuss a custom reed relay.

8000 S8000 S8000 S8000 S8000 SERIESERIESERIESERIESERIES F F F F FEATURESEATURESEATURESEATURESEATURES

14 - Pin DIP Industry standard package. High Insulation Resistance - 1012 offered on most models. High reliability, hermetically sealed contacts for long life. Proven to 500 million operations. Contact forms; 1A, 2A, 1B and 1C available. Surface mount version available. Molded thermoset body on integral lead frame design. Optional Electrostatic Shield for reducing capacitive coupling offered on some models. Coil suppression diode available upon request. High Voltage Breakdown versions available. Dimensions in Inches (Millimeters) (For Model #’s 8001, 8002, 8021 & 8041) (For Model # 8061)

COTO TECHNOLOGY 55 Dupont Drive, Providence, RI 02907-3105 / (401) 943-2686 Fax (401) 942-0920 23 Model Number 8001 8002 8021 8041 Parameters Test Conditions Units 1 Form A 2 Form A 1 Form B 1 Form C COIL SPECS. Nom. Coil VoltageVDC 5 12 5 12 5 12 5 12 5 12 Coil Resistance+/- 10%, 25 ° C 500 500200 500200 500200 500200 500 CONTACT RATINGS Switching VoltageMax DC/Peak AC Resist.Volts200200200100100 Contact RatingMax DC/Peak AC Resist.Watts10101033 Life Expectancy-Typical1 Signal Level 1.0V,10mA x 106 Ops. 500500500100100 Static Contact Resistance (max. init.) 50mV, 10mA Dynamic Contact Resistance (max. init.) 0.5V, 50mA at 100 Hz, 1.5 msec RELAY SPECIFICATIONS Insulation Resistance (minimum) Between all Isolated Pins at 100V, 25°C, 40% RH x 1012 x 1012 x 1012 x 1010 x 1010 Dielectric Strength (minimum) Between Contacts Contacts to Shield Contacts/Shield to Coil VDC/peak AC VDC/peak AC VDC/peak AC 300 1500 1500 300 1500 1500 300 1500 1500 200 1500 1500 200 1500 1500 Operate Time - including bounce - Typical At Nominal Coil Voltage, Release Time - TypicalNo Suppression Diode Suppression msec. msec. 0.5 1.0 0.5 1.0 0.5 1.0 0.5 1.5 0.5 1.5 8061

1 Form C

1 Consult factory for life expectancy

at other switching loads.

2 Molded depression on top of relay

refers to pin #1 location.

3 Optional coil suppression diode across

pins 2(+) and 6(-). 4 Optional ES Shield is tied to pins 9 & 13. Top View: Dot stamped on top of relay refers to pin #1 location Grid = .1"x.1" (2.54mm x 2.54mm) Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C The operate and release voltage and the coil resistance are specified at 25 °C. These values vary by approximately 0.4%/ °C as the ambient temperature varies. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s * For SMD reed relays, maximum reflow soldering temperature is 221°C for one minute. If high temperature solder (95% Sn / 5% Sb) is used in the relay construction, the temperature limit is 226 °C for one minute. for through-hole relays (molded or potted), maximum wave solder temperature is 270 °C for 10 secs.