74VHCT541A FAIRCHILD
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 7
Technical content
Features
I High Speed: tPD /c32 5.5 ns (typ) at VCC /c32 5V I Low power dissipation: ICC /c32 4 /c80 A (max) at TA /c32 25/c113 C I Power down protection is provided on all inputs and outputs I Pin and function compatible with 74HCT541 Ordering Code: Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Pb-Free package per JEDEC J-STD-020B. Logic Symbol IEEE/IEC Pin Descriptions Connection Diagram Truth Table H /c32 HIGH Voltage Level L /c32 LOW Voltage Level X /c32 Immaterial Z /c32 High Impedance Order Number Package Number Package Description 74VHCT541AM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide 74VHCT541ASJ M20D Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74VHCT541AMTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74VHCT541AN N20A 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Pin Names Description OE 1, OE2 3-STATE Output Enable Inputs I0 - I7 Inputs O 0 - O7 3-STATE Outputs Inputs Outputs OE 1 OE 2 I LLHH HXX Z XHX Z LLL L
www.fairchildsemi.com 2 74VHCT541A Absolute Maximum Ratings(Note 2) Recommended Operating Conditions (Note 6) Note 2: Absolute Maximum Ratings are values beyond which the device may be damaged or have its useful life impaired. The databook specifica- tions should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading vari- ables. Fairchild does not recommend operation outside databook specifica- tions. Note 3: When Outputs are in OFF-State OR when V CC /c32 0V. Note 4: HIGH or LOW state IOUT absolute maximum rating must be observed. Note 5: VOUT /c31 GND,.V OUT /c33 VCC (Outputs Active). Note 6: Unused inputs must be held HIGH or LOW. They may not float. Supply Voltage (VCC ) /c16 0.5V to /c14 7.0V DC Input Voltage (VIN) /c16 0.5V to /c14 7.0V DC Output Voltage (VOUT ) (Note 3) /c16 0.5V to 7.0V (Note 4) /c16 0.5V to V CC + 0.5V Input Diode Current (IIK) /c16 20 mA Output Diode Current (IOK ) (Note 5) /c114 20 mA DC Output Current (IOUT ) /c114 25 mA DC V CC /GND Current (ICC ) /c114 75 mA Storage Temperature (TSTG ) /c16 65/c113 C to /c14 150/c113 C Lead Temperature (TL) (Soldering, 10 seconds) 260 /c113 C Supply Voltage (VCC ) 4.5V to /c14 5.5V Input Voltage (VIN) 0V to /c14 5.5V Output Voltage (VOUT ) (Note 4) 0V to V CC (Note 3) 0V to 5.5V Operating Temperature (TOPR ) /c16 40/c113 C to /c14 85/c113 C Input Rise and Fall Time (tr, tf) VCC /c32 5.0V /c114 0.5V 0 /c97 20 ns/V Symbol Parameter VCC (V) TA /c32 25/c113 CT A /c32 /c16 40/c113 C to /c14 85/c113 C Units Conditions Min Typ Max Min Max VIH HIGH Level Input Voltage 4.5 /c16 5.5 2.0 2.0 V VIL LOW Level Input Voltage 4.5 /c16 5.5 0.8 0.8 V V OH HIGH Level Output Voltage 4.5 4.4 4.5 4.4 V V IN /c32 VIH IOH /c32 /c16 50 /c80 A 4.5 3.94 3.80 V I OH /c32 /c16 8 mA V OL LOW Level Output Voltage 4.5 0.0 0.1 0.1 V V IN /c32 VIL IOL /c32 /c14 50 /c80 A 4.5 0.36 0.44 V I OL /c32 /c14 8 mA IOZ 3-STATE Output 5.5 /c114 0.25 /c114 2.5 /c80 AV IN /c32 VIH or VIL Off-State Current VOUT /c32 VCC or GND IIN Input Leakage Current 0 /c16 5.5 /c114 0.1 /c114 1.0 /c80 AV IN /c32 5.5V or GND ICC Quiescent Supply Current 5.5 4.0 40.0 /c80 AV IN /c32 VCC or GND ICCT Maximum ICC /Input 5.5 1.35 1.50 mA V IN /c32 3.4V Other Inputs /c32 VCC or GND IOFF Output Leakage Current 0 0.5 5.0 /c80 AV OUT /c32 5.5V
3 www.fairchildsemi.com 74VHCT541A Noise Characteristics Note 7: Parameter guaranteed by design. Note 8: Parameter guaranteed by design. tOSLH /c32 |tPLHmax /c16 tPLHmin |; tOSHL /c32 |tPHLmax /c16 tPHLmin |. Note 9: C PD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (OPR.) /c32 CPD * VCC * fIN /c14 ICC /8 (per bit). Symbol Parameter VCC (V) TA /c32 25/c113 C Units Conditions Typ Limits VOLP (Note 7) Quiet Output Maximum Dynamic VOL 5.0 1.2 1.6 V C L /c32 50 pF VOLV (Note 7) Quiet Output Minimum Dynamic VOL 5.0 /c16 1.2 /c16 1.6 V C L /c32 50 pF VIHD (Note 7) Minimum HIGH Level Dynamic Input Voltage 5.0 2.0 V C L /c32 50 pF VILD (Note 7) Maximum HIGH Level Dynamic Input Voltage 5.0 0.8 V C L /c32 50 pF Symbol Parameter VCC (V) TA /c32 25/c113 C T A /c32 /c16 40/c113 C to /c14 85/c113 C Units Conditions Min Typ Max Min Max tPHL Time 5.5 7.9 1.0 9.0 C L /c32 50 pF tPZH Enable Time 8.8 12.3 1.0 14.0 C L /c32 50 pF tPHZ Disable Time tOSLH Output to Output Skew 5.0 /c114 0.5 1.0 1.0 ns (Note 8) C L /c32 50 pF tOSHL C IN Input Capacitance 4 10 10 pF V CC /c32 Open C OUT Output Capacitance 9 pF V CC /c32 5.0V C PD Power Dissipation Capacitance 19 pF (Note 9)
www.fairchildsemi.com 4 74VHCT541A Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package Number M20B
5 www.fairchildsemi.com 74VHCT541A Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M20D
www.fairchildsemi.com 6 74VHCT541A Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
7 www.fairchildsemi.com 74VHCT541A Octal Buffer/Line Driver with 3-STATE Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N20A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD ’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com