74VHCT138A_07 FAIRCHILD
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 9
Technical content
Features
High Speed: t PD 7.6ns (Typ.) at V CC Low power dissipation: I CC 4µA (Max.) at T A 25°C Power down protection is provided on all inputs and outputs Pin and function compatible with 74HCT138 General Description The VHCT138A is an advanced high speed CMOS 3-to-8 DECODER fabricated with silicon gate CMOS technology. It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. When the device is enabled, 3 Binary Select inputs , A and A ) determine which one of the outputs ) will go LOW. When enable input E is held LOW or either E or E is held HIGH, decoding function is inhibited and all outputs go HIGH. E , E and E inputs are provided to ease cascade connection and for use as an address decoder for memory systems. Protection circuits ensure that 0V to 7V can be applied to the input pins without regard to the supply voltage and to the out- put pins with V CC 0V. These circuits prevent device destruction due to mismatched supply and input/output voltages. This device can be used to interface 3V to 5V systems and two supply systems such as battery backup.
Ordering Information
Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter “X” to the ordering number. Order Number Package Number Package Description 74VHCT138AM M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74VHCT138ASJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74VHCT138AMTC MTC16 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
74VHCT138A 3-to-8 Decoder/Demultiplexer ©1993 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VHCT138A Rev. 1.2 2 Connection Diagram Pin Description Logic Symbols IEEE/IEC Truth Table H HIGH Voltage Level L LOW Voltage Level X Immaterial Pin Names Description A Address Inputs E Enable Inputs E Enable Input O Outputs Inputs Outputs E E E A A A O O O O O O O O H XXXXX HHHHHHHH XH XXXX HHHHHHHH X XL XXX HHHHHHHH LLHLLLL HHHHHHH LL HHL LHLHHHHHH L LHLHLHHL HHHHH LL HHHLHHHLHHHH L LHL L HHHHHLHHH LL HHLHHHHHHLHH L LHL HHHHHHHHLH LL HHHHHHHHHHHL
74VHCT138A 3-to-8 Decoder/Demultiplexer ©1993 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VHCT138A Rev. 1.2 3 Logic Diagram Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
74VHCT138A 3-to-8 Decoder/Demultiplexer ©1993 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VHCT138A Rev. 1.2 4 Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Recommended Operating Conditions (4) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Notes: 1. V CC 0V. 2. HIGH or LOW state. I OUT absolute maximum rating must be observed. 3. V OUT GND, V OUT V CC (Outputs Active). 4. Unused inputs must be held HIGH or LOW. They may not float. Symbol Parameter Rating V CC Supply Voltage –0.5V to +7.0V V IN DC Input Voltage –0.5V to +7.0V V OUT DC Output Voltage Note 1 Note 2 –0.5V to 7.0V –0.5V to V CC + 0.5V I IK Input Diode Current –20mA I OK Output Diode Current (3) ±20mA I OUT DC Output Current ±25mA I CC DC V CC / GND Current ±75mA T STG Storage Temperature –65°C to +150°C T L Lead Temperature (Soldering, 10 seconds) 260°C Symbol Parameter Rating V CC Supply Voltage 4.5V to +5.5V V IN Input Voltage 0V to +5.5V V OUT Output Voltage Note 1 Note 2 0V to 5.5V 0V to V CC T OPR Operating Temperature –40°C to +85°C t r , t f Input Rise and Fall Time, V CC 5.0V ±0.5V 0 20ns/V
74VHCT138A 3-to-8 Decoder/Demultiplexer ©1993 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VHCT138A Rev. 1.2 5 Note: 5. C PD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: I CC (Opr.) C PD
- V CC
- f IN + I CC Symbol Parameter V CC (V) Conditions T A 25°C T A –40°C to +85°C V IH HIGH Level Input Voltage 4.5 – 5.5 2.0 2.0 V V IL LOW Level Input Voltage 4.5 – 5.5 0.8 0.8 V V OH HIGH Level Output Voltage 4.5 V IN V IH or V IL I OH –50µA 4.4 4.5 4.4 V I OH –8mA 3.94 3.80 V OL LOW Level Output Voltage 4.5 V IN V IH or V IL IOL = 50µA 0.0 0.1 0.1 V IOL = 8mA 0.36 0.44 IIN Input Leakage Current 0 – 5.5 V IN = 5.5V or GND ±0.1 ±1.0 µA ICC Quiescent Supply Current 5.5 V IN = VCC or GND 4.0 20.0 µA ICCT Maximum ICC /Input 5.5 V IN = 3.4V, All other inputs = VCC or GND 1.35 1.50 mA IOFF Output Leakage Current 0 V OUT = 5.5V 0.5 5.0 µA Symbol Parameter V CC (V) Conditions TA = 25°C TA = –40°C to +85°C tPLH, tPHL Propagation Delay, An to On CL = 50pF 8.1 11.4 1.0 13.0 tPLH, tPHL Propagation Delay, E3 to On CL = 50pF 7.1 10.1 1.0 11.5 tPLH, tPHL Propagation Delay, E1 or E2 to On CL = 50pF 7.5 10.6 1.0 12.0 CIN Input Capacitance V CC = Open 4 10 10 pF CPD Power Dissipation Capacitance (5) 49 pF
Dimensions are in millimeters unless otherwise noted. Figure 1. 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Dimensions are in millimeters unless otherwise noted. Figure 2. 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Dimensions are in millimeters unless otherwise noted. Figure 3. 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
74VHCT138A 3-to-8 Decoder/Demultiplexer ©1993 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VHCT138A Rev. 1.2 9 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx Across the board. Around the world.™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ DOME™ E CMOS™ EcoSPARK EnSigna™ FACT Quiet Series™ FACT FAST FASTr™ FPS™ FRFET GlobalOptoisolator™ GTO™ HiSeC™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ MICROCOUPLER™ MicroPak™ MICROWIRE™ Motion-SPM™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC OPTOPLANAR PACMAN™ PDP-SPM™ POP™ Power220 Power247 PowerEdge™ PowerSaver™ Power-SPM™ PowerTrench Programmable Active Droop™ QFET QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ ScalarPump™ SMART START™ SPM STEALTH™ SuperFET™ SuperSOT™ -3 SuperSOT™ -6 SuperSOT™ -8 SyncFET™ TCM™ The Power Franchise TinyBoost™ TinyBuck™ TinyLogic TINYOPTO™ TinyPower™ TinyWire™ TruTranslation™ µSerDes™ UHC UniFET™ VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed First Production Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I27