74VHC9363FT TOSHIBA
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 10
Technical content
74VHC9363FT,74VHC9364FT CMOS Digital Integrated Circuits Silicon Monolithic 74VHC9363FT,74VHC9364FT74VHC9363FT,74VHC9364FT74VHC9363FT,74VHC9364FT74VHC9363FT,74VHC9364FT Start of commercial production 2020-01 1. 1. 1. 1. Functional DescriptionFunctional DescriptionFunctional DescriptionFunctional Description
- Dual 3-bit Schmitt trigger Buffer 74VHC9363FT:With pull-down resistor at data input terminal 74VHC9364FT:With pull-up resistor at data input terminal 2. 2. 2. 2. GeneralGeneralGeneralGeneral The 74VHC9363, 74VHC9364 are an advanced high speed CMOS Hex SCHMITT BUFFERs fabricated with silicon gate C2MOS technology. These are fit for use interface between microcomputer to IPU (Integrated Power Unit) at the three-phase inverter circuit, because it consists of two of 3-bit schmitt trigger buffer circuits which is controlled by three of control Inputs / Gxn(s). Since outputs level can be fixed "L" level for 74VHC9363 and "H" level for 74VHC9364 when to disabling of output terminal with the control input which received the fail signal, it compared with the pull-down / pull-up resistor normally used, it is less affected by ambient noise and contributes to the improvement of motor operation control accuracy of IPU (Integrated Power Unit). Each data input terminal Dxn and control terminal / Gxn has a built-in pull-up resistor or pull-down resistor, it's can fixed output level even when the input is open. Description of terminal name: "x" is H or L, N is 1 to 3. 3. 3. 3. 3. FeaturesFeaturesFeaturesFeatures (1) High speed: tpd = 5.0 ns (typ.) at VCC = 5.0 V (2) Wide operating temperature range: Topr = -40 to 125 (3) Low power dissipation: ICC = 4.0 µA (max) at Ta = 25 (4) Power-down protection is provided on all inputs. (5) Balanced propagation delays: tPLH ≈ tPHL (6) Wide operating voltage range: VCC(opr) = 2.0 V to 5.5 V (7) Low noise: VOLP = 1.0 V (max) 4. 4. 4. 4. PackagingPackagingPackagingPackaging TSSOP20B 2020-02-06 Rev.1.0 ©2019-2020 Toshiba Electronic Devices & Storage Corporation
74VHC9363FT,74VHC9364FT 5. 5. 5. 5. Pin AssignmentPin AssignmentPin AssignmentPin Assignment 6. 6. 6. 6. MarkingMarkingMarkingMarking 74VHC9363FT 74VHC9364FT 7. 7. 7. 7. System DiagramSystem DiagramSystem DiagramSystem Diagram 74VHC9363FT 74VHC9364FT 2020-02-06 Rev.1.0 ©2019-2020 Toshiba Electronic Devices & Storage Corporation
74VHC9363FT,74VHC9364FT 8. 8. 8. 8. Truth TableTruth TableTruth TableTruth Table Inputs /GH1 /GL1 H X X L L Inputs /GH2 /GL2 X H X L L Inputs /GH3 /GL3 X X H L L Inputs DHn DLn X X X L H Outputs YHn, YLn VHC9363 L L L L H Outputs YHn, YLn VHC9364 H H H L H X: Don't care 9. 9. 9. 9. Absolute Maximum Ratings (Note)Absolute Maximum Ratings (Note)Absolute Maximum Ratings (Note)Absolute Maximum Ratings (Note) Characteristics Supply voltage Input voltage Output voltage Input current Input diode current Output diode current Output current VCC/ground current Power dissipation Storage temperature Symbol VCC VIN VOUT IIN IIK IOK IOUT ICC PD Tstg Note (Note Rating -0.5 to 7.0 -0.5 to 7.0 -0.5 to VCC + 0.5 ±1.0 -20 ±20 ±25 ±75 180 -65 to 150 Unit V V V mA mA mA mA mA mW Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: 180 mW in the range of T a = -40 to 85 . From Ta = 85 to 125 a derating factor of -3.25 mW/ shall be applied until 50 mW. 10. 10. 10. 10. Operating Ranges (Note)Operating Ranges (Note)Operating Ranges (Note)Operating Ranges (Note) Characteristics Supply voltage Input voltage Output voltage Operating temperature Symbol VCC VIN VOUT Topr Rating 2.0 to 5.5 0 to 5.5 0 to VCC -40 to 125 Unit V V V Note: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND. Note: All input terminal has a built-in pull-up resistor or pull-down resistor. It is recommended that unused inputs be connected to VCC or GND. 2020-02-06 Rev.1.0 ©2019-2020 Toshiba Electronic Devices & Storage Corporation
74VHC9363FT,74VHC9364FT 11. 11. 11. 11. Electrical CharacteristicsElectrical CharacteristicsElectrical CharacteristicsElectrical Characteristics Characteristics Positive threshold voltage Negative threshold voltage Hysteresis voltage High-level output voltage Low-level output voltage High-level input current Low-level input current Quiescent supply current Pull-down resistance Pull-up resistance Symbol VP VN VH VOH VOL IIH1 IIH2 IIL1 IIL2 ICC RPD RPU Test Condition VIN = VIH or VIL VIN = VIH or VIL VIN = VCC Applies to terminals with pull-up resistor. VIN = VCC Applies to terminals with pull-down resistor. VIN = 0 V Applies to terminals with pull-up resistor. VIN = 0 V Applies to terminals with pull-down resistor. VIN = 0 V or Open Applies to terminals with pull-down resistor. VIN = 5.5 V or Open Applies to terminals with pull-up resistor. IOH = -50 µA IOH = -4 mA IOH = -8 mA IOL = 50 µA IOL = 4 mA IOL = 8 mA VCC (V) 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 2.0 3.0 4.5 3.0 4.5 2.0 3.0 4.5 3.0 4.5 0 to 5.5 0 to 5.5 0 to 5.5 0 to 5.5 5.5 5.0 5.0 Min 0.9 1.35 1.65 0.30 0.40 0.50 1.9 2.9 4.4 2.58 4.4 -500 Typ. Max 2.20 3.15 3.85 1.20 1.40 1.60 0.1 0.1 0.1 0.36 0.36 ±1.0 500 ±1.0 4.0 Unit V V V V V µA µA µA µA µA kΩ 2020-02-06 Rev.1.0 ©2019-2020 Toshiba Electronic Devices & Storage Corporation
74VHC9363FT,74VHC9364FT Characteristics Positive threshold voltage Negative threshold voltage Hysteresis voltage High-level output voltage Low-level output voltage High-level input current Low-level input current Quiescent supply current Pull-down resistance Pull-up resistance Symbol VP VN VH VOH VOL IIH1 IIH2 IIL1 IIL2 ICC RPD RPU Test Condition VIN = VIH or VIL VIN = VIH or VIL VIN = VCC Applies to terminals with pull- up resistor. VIN = VCC Applies to terminals with pull- down resistor. VIN = 0 V Applies to terminals with pull- up resistor. VIN = 0 V Applies to terminals with pull- down resistor. VIN = 0 V or Open Applies to terminals with pull- down resistor. VIN = 5.5 V or Open Applies to terminals with pull- up resistor. IOH = -50 µA IOH = -4 mA IOH = -8 mA IOL = 50 µA IOL = 4 mA IOL = 8 mA VCC (V) 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 2.0 3.0 4.5 3.0 4.5 2.0 3.0 4.5 3.0 4.5 0 to 5.5 0 to 5.5 0 to 5.5 0 to 5.5 5.5 5.0 5.0 Min 0.9 1.35 1.65 0.30 0.40 0.50 1.9 2.9 4.4 2.48 3.80 -690 Max 2.20 3.15 3.85 1.20 1.40 1.60 0.1 0.1 0.1 0.44 0.44 ±20.0 690 ±20.0 40.0 Unit V V V V V µA µA µA µA µA kΩ 2020-02-06 Rev.1.0 ©2019-2020 Toshiba Electronic Devices & Storage Corporation
74VHC9363FT,74VHC9364FT Characteristics Positive threshold voltage Negative threshold voltage Hysteresis voltage High-level output voltage Low-level output voltage High-level input current Low-level input current Quiescent supply current Pull-down resistance Pull-up resistance Symbol VP VN VH VOH VOL IIH1 IIH2 IIL1 IIL2 ICC RPD RPU Test Condition VIN = VIH or VIL VIN = VIH or VIL VIN = VCC Applies to terminals with pull- up resistor. VIN = VCC Applies to terminals with pull- down resistor. VIN = 0 V Applies to terminals with pull- up resistor. VIN = 0 V Applies to terminals with pull- down resistor. VIN = 0 V or Open Applies to terminals with pull- down resistor. VIN = 5.5 V or Open Applies to terminals with pull- up resistor. IOH = -50 µA IOH = -4 mA IOH = -8 mA IOL = 50 µA IOL = 4 mA IOL = 8 mA VCC (V) 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 2.0 3.0 4.5 3.0 4.5 2.0 3.0 4.5 3.0 4.5 0 to 5.5 0 to 5.5 0 to 5.5 0 to 5.5 5.5 5.0 5.0 Min 0.9 1.35 1.65 0.30 0.40 0.50 1.9 2.9 4.4 2.40 3.70 -690 Max 2.20 3.15 3.85 1.20 1.40 1.60 0.1 0.1 0.1 0.55 0.55 ±50.0 690 ±50.0 80.0 Unit V V V V V µA µA µA µA µA kΩ 2020-02-06 Rev.1.0 ©2019-2020 Toshiba Electronic Devices & Storage Corporation
74VHC9363FT,74VHC9364FT Characteristics Propagation delay time (Dxx-Yxx) Propagation delay time (/Gxx-Yxx) Output skew Input capacitance Symbol tPLH,tPHL tPLH,tPHL tosLH,tosHL CIN Note (Note 1) Test Condition VCC (V) 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 CL (pF) Min Typ. 6.0 9.0 5.0 7.0 8.5 13.0 6.5 10.5 Max 8.0 12.5 5.5 8.5 11.5 17.0 8.0 12.5 1.5 1.0 Unit ns ns ns pF Note 1: Parameter guaranteed by design. (tosLH = |tPLHm-tPLHn|, tosHL = |tPHLm-tPHLn|) (Unless otherwise specified, T(Unless otherwise specified, T(Unless otherwise specified, T(Unless otherwise specified, Taaaa = -40 to 85 = -40 to 85 = -40 to 85 = -40 to 85 , Input: t, Input: t, Input: t, Input: trrrr = t = t = t = tffff = 3 ns) = 3 ns) = 3 ns) = 3 ns) Characteristics Propagation delay time (Dxx-Yxx) Propagation delay time (/Gxx-Yxx) Output skew Input capacitance Symbol tPLH,tPHL tPLH,tPHL tosLH,tosHL CIN Note (Note 1) Test Condition VCC (V) 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 CL (pF) Min 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Max 10.0 15.0 7.0 10.0 13.5 20.5 9.5 15.0 1.5 1.0 Unit ns ns ns pF Note 1: Parameter guaranteed by design. (tosLH = |tPLHm-tPLHn|, tosHL = |tPHLm-tPHLn|) 2020-02-06 Rev.1.0 ©2019-2020 Toshiba Electronic Devices & Storage Corporation
74VHC9363FT,74VHC9364FT (Unless otherwise specified, T(Unless otherwise specified, T(Unless otherwise specified, T(Unless otherwise specified, Taaaa = -40 to 125 = -40 to 125 = -40 to 125 = -40 to 125 , Input: t, Input: t, Input: t, Input: trrrr = t = t = t = tffff = 3 ns) = 3 ns) = 3 ns) = 3 ns) Characteristics Propagation delay time (Dxx-Yxx) Propagation delay time (/Gxx-Yxx) Output skew Input capacitance Symbol tPLH,tPHL tPLH,tPHL tosLH,tosHL CIN Note (Note 1) Test Condition VCC (V) 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 CL (pF) Min 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Max 11.5 17.0 8.0 11.0 15.0 23.0 10.5 17.0 1.5 1.0 Unit ns ns ns pF Note 1: Parameter guaranteed by design. (tosLH = |tPLHm-tPLHn|, tosHL = |tPHLm-tPHLn|) Characteristics Quiet output maximum dynamic VOL Quiet output minimum dynamic VOL Minimum high-level dynamic input voltage Maximum low-level dynamic input voltage Symbol VOLP VOLV VIHD VILD Test Condition CL = 50 pF CL = 50 pF CL = 50 pF CL = 50 pF VCC (V) 5.0 5.0 5.0 5.0 Typ. 0.7 -0.7 Limit 1.0 -1.0 3.5 1.5 Unit V V V V 12. 12. 12. 12. Internal Equivalent CircuitInternal Equivalent CircuitInternal Equivalent CircuitInternal Equivalent Circuit 2020-02-06 Rev.1.0 ©2019-2020 Toshiba Electronic Devices & Storage Corporation
74VHC9363FT,74VHC9364FT Package DimensionsPackage DimensionsPackage DimensionsPackage Dimensions Unit: mm Weight: 0.071 g (typ.) Package Name(s) Nickname: TSSOP20B 2020-02-06 Rev.1.0 ©2019-2020 Toshiba Electronic Devices & Storage Corporation
74VHC9363FT,74VHC9364FT https://toshiba.semicon-storage.com/ RESTRICTIONS ON PRODUCT USERESTRICTIONS ON PRODUCT USERESTRICTIONS ON PRODUCT USERESTRICTIONS ON PRODUCT USE Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as "TOSHIBA". Hardware, software and systems described in this document are collectively referred to as "Product".
- TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.
- This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
- Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
- PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, lifesaving and/or life supporting medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, and devices related to power plant. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative or contact us via our website.
- Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
- Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations.
- The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
- ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALEABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALEABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALEABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDINGINCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDINGINCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDINGINCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, ANDWITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, ANDWITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, ANDWITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAROR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAROR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAROR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
- Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
- Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS. 2020-02-06 Rev.1.0 ©2019-2020 Toshiba Electronic Devices & Storage Corporation