74VHC9164FT TOSHIBA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 14

Technical content

CMOS Digital Integrated Circuits Silicon Monolithic 74VHC9164FT74VHC9164FT74VHC9164FT74VHC9164FT Start of commercial production 2014-06 1. 1. 1. 1. Functional DescriptionFunctional DescriptionFunctional DescriptionFunctional Description

  • 8-Bit Shift Register (P-IN, S-OUT/S-IN, P-OUT) 2. 2. 2. 2. GeneralGeneralGeneralGeneral The 74VHC9164FT is an ultra-high-speed 8-Bit Shift Register fabricated using silicon-gate CMOS technology. The 74VHC9164FT combines low power consumption of CMOS with Schottky TTL speeds. The 74VHC9164FT has parallel data inputs/outputs, a serial input and a serial output. It converts parallel data into serial data or vice versa. When P/S CONT is Low, Q/D1 to Q/D8 are configured as parallel data outputs. At this time, the SI input is serially loaded on the rising edges of CK and unloaded from the Q/D1 to Q/D8 outputs in parallel. When CLR/LOAD input is Low, all flip-flops are asynchronously reset, irrespective of the CK state. When P/S CONT is High, Q/D1 to Q/D8 are configured as parallel data inputs. At this time, when CLR/LOAD is Low, Q/D1 to Q/D8 latch data in parallel asynchronously from the CK input. All the inputs have hysteresis between the positive-going and negative-going thresholds. Thus the 74VHC9164FT is capable of squaring up transitions of slowly changing input signals and provides an improved noise immunity. Additionally, all the inputs have a newly developed protection circuit without a diode returned to V CC. This enables the inputs to be tolerant of up to 5.5 volts even when power supply is down. The input power-down protection capability makes the 74VHC9164FT ideal for a wide range of applications, such as interfacing between different voltages, voltage translation from 5 V to 3 V and battery back-up circuits. 3. 3. 3. 3. FeaturesFeaturesFeaturesFeatures (1) AEC-Q100 (Rev. H) (Note 1) (2) Wide operating temperature range: Topr = -40 to 125  (3) High speed: fMAX = 149 MHz (typ.) at VCC = 5.0 V (4) Low power dissipation: ICC = 4.0 µA (max) at Ta = 25  (5) Power-down protection is provided on all inputs. (6) Balanced propagation delays: tPLH ≈ tPHL (7) Wide operating voltage range: VCC(opr) = 2.0 V to 5.5 V Note 1: This device is compliant with the reliability requirements of AEC-Q100. For details, contact your Toshiba sales representative. 4. 4. 4. 4. PackagingPackagingPackagingPackaging TSSOP16B 2016-08-05 Rev.2.0 ©2016 Toshiba Corporation
  1. 5. 5. 5. Pin AssignmentPin AssignmentPin AssignmentPin Assignment 6. 6. 6. 6. MarkingMarkingMarkingMarking 7. 7. 7. 7. Truth TableTruth TableTruth TableTruth Table X: Don't care 2016-08-05 Rev.2.0 ©2016 Toshiba Corporation
  1. 8. 8. 8. Timing DiagramsTiming DiagramsTiming DiagramsTiming Diagrams 9. 9. 9. 9. System DiagramSystem DiagramSystem DiagramSystem Diagram 2016-08-05 Rev.2.0 ©2016 Toshiba Corporation
  1. 10. 10. 10. Absolute Maximum Ratings (Note)Absolute Maximum Ratings (Note)Absolute Maximum Ratings (Note)Absolute Maximum Ratings (Note) Characteristics Supply voltage Input voltage Output voltage Bus I/O voltage (Q/D1 to Q/D8) Input diode current Output diode current Output current VCC/ground current Power dissipation Storage temperature Symbol VCC VIN VOUT VI/O IIK IOK IOUT ICC PD Tstg Note (Note 1) (Note 2) (Note 3) Rating -0.5 to 7.0 -0.5 to 7.0 -0.5 to VCC + 0.5 -0.5 to 7.0 -0.5 to VCC + 0.5 -20 ±20 ±25 ±75 180 -65 to 150 Unit V V V V mA mA mA mA mW Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Output in OFF state. Note 2: High (H) or Low (L) state. IOUT absolute maximum rating must be observed. Note 3: 180 mW in the range of T a = -40 to 85  . From Ta = 85 to 125  a derating factor of -3.25 mW/  shall be applied until 50 mW. 11. 11. 11. 11. Operating Ranges (Note)Operating Ranges (Note)Operating Ranges (Note)Operating Ranges (Note) Characteristics Supply voltage Input voltage Output voltage Bus I/O voltage (Q/D1 to Q/D8) Operating temperature Symbol VCC VIN VOUT VI/O Topr Note (Note 1) (Note 2) Rating 2.0 to 5.5 0 to 5.5 0 to VCC 0 to 5.5 0 to VCC -40 to 125 Unit V V V V Note: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND. Note 1: Output in OFF state. Note 2: High (H) or Low (L) state. 2016-08-05 Rev.2.0 ©2016 Toshiba Corporation
  1. 12. 12. 12. Electrical CharacteristicsElectrical CharacteristicsElectrical CharacteristicsElectrical Characteristics Characteristics Positive threshold voltage Negative threshold voltage Hysteresis voltage High-level output voltage Low-level output voltage 3-state output OFF-state leakage current (Q/D1 to Q/D8) Input leakage current Quiescent supply current Symbol VP VN VH VOH VOL IOZ IIN ICC Test Condition VIN = VIH or VIL VIN = VIH or VIL VIN = VIH or VIL VI/O = 5.5 V or GND VIN = 5.5 V or GND VIN = VCC or GND IOH = -50 µA IOH = -4 mA IOH = -8 mA IOL = 50 µA IOL = 4 mA IOL = 8 mA VCC (V) 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 2.0 3.0 4.5 3.0 4.5 2.0 3.0 4.5 3.0 4.5 0 to 5.5 0 to 5.5 5.5 Min 0.90 1.35 1.65 0.30 0.40 0.50 1.9 2.9 4.4 2.58 3.94 Typ. 2.0 3.0 4.5 0.0 0.0 0.0 Max 2.20 3.15 3.85 1.20 1.40 1.60 0.1 0.1 0.1 0.36 0.36 ±0.25 ±0.1 4.0 Unit V V V V V µA µA µA 2016-08-05 Rev.2.0 ©2016 Toshiba Corporation

Positive threshold voltage Negative threshold voltage Hysteresis voltage High-level output voltage Low-level output voltage 3-state output OFF-state leakage current (Q/D1 to Q/D8) Input leakage current Quiescent supply current Symbol VP VN VH VOH VOL IOZ IIN ICC Test Condition VIN = VIH or VIL VIN = VIH or VIL VIN = VIH or VIL VI/O = 5.5 V or GND VIN = 5.5 V or GND VIN = VCC or GND IOH = -50 µA IOH = -4 mA IOH = -8 mA IOL = 50 µA IOL = 4 mA IOL = 8 mA VCC (V) 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 2.0 3.0 4.5 3.0 4.5 2.0 3.0 4.5 3.0 4.5 0 to 5.5 0 to 5.5 5.5 Min 0.90 1.35 1.65 0.30 0.40 0.50 1.9 2.9 4.4 2.48 3.80 Max 2.20 3.15 3.85 1.20 1.40 1.60 0.1 0.1 0.1 0.44 0.44 ±2.5 ±1.0 40.0 Unit V V V V V µA µA µA 2016-08-05 Rev.2.0 ©2016 Toshiba Corporation

Positive threshold voltage Negative threshold voltage Hysteresis voltage High-level output voltage Low-level output voltage 3-state output OFF-state leakage current (Q/D1 to Q/D8) Input leakage current Quiescent supply current Symbol VP VN VH VOH VOL IOZ IIN ICC Test Condition VIN = VIH or VIL VIN = VIH or VIL VIN = VIH or VIL VI/O = 5.5 V or GND VIN = 5.5 V or GND VIN = VCC or GND IOH = -50 µA IOH = -4 mA IOH = -8 mA IOL = 50 µA IOL = 4 mA IOL = 8 mA VCC (V) 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 2.0 3.0 4.5 3.0 4.5 2.0 3.0 4.5 3.0 4.5 0 to 5.5 0 to 5.5 5.5 Min 0.90 1.35 1.65 0.30 0.40 0.50 1.9 2.9 4.4 2.40 3.70 Max 2.20 3.15 3.85 1.20 1.40 1.60 0.1 0.1 0.1 0.55 0.55 ±10.0 ±2.0 80.0 Unit V V V V V µA µA µA 2016-08-05 Rev.2.0 ©2016 Toshiba Corporation

(CK) Minimum pulse width (CLR/LOAD) Minimum setup time (Q/D1 to Q/D8 -CLR/LOAD) Minimum setup time (SI-CK) Minimum hold time (Q/D1 to Q/D8 -CLR/LOAD) Minimum hold time (SI-CK) Minimum removal time (CLR/LOAD-CK) Symbol tw(L),tw(H) tw(L) tS tS th th trem Test Condition VCC (V) 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 Limit 7.0 5.0 6.0 5.0 6.0 5.0 6.0 5.0 1.0 1.0 1.0 1.5 5.0 3.0 Unit ns ns ns ns ns ns ns (Unless otherwise specified, T(Unless otherwise specified, T(Unless otherwise specified, T(Unless otherwise specified, Taaaa = -40 to 85 = -40 to 85 = -40 to 85 = -40 to 85  , Input: t, Input: t, Input: t, Input: trrrr = t = t = t = tffff = 3 ns) = 3 ns) = 3 ns) = 3 ns) Characteristics Minimum pulse width (CK) Minimum pulse width (CLR/LOAD) Minimum setup time (Q/D1 to Q/D8 -CLR/LOAD) Minimum setup time (SI-CK) Minimum hold time (Q/D1 to Q/D8 -CLR/LOAD) Minimum hold time (SI-CK) Minimum removal time (CLR/LOAD-CK) Symbol tw(L),tw(H) tw(L) tS tS th th trem Test Condition VCC (V) 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 Limit 8.0 6.0 7.0 6.0 7.0 6.0 7.0 5.0 1.0 1.0 1.0 1.5 5.0 3.0 Unit ns ns ns ns ns ns ns 2016-08-05 Rev.2.0 ©2016 Toshiba Corporation

(Unless otherwise specified, T(Unless otherwise specified, T(Unless otherwise specified, T(Unless otherwise specified, Taaaa = -40 to 125 = -40 to 125 = -40 to 125 = -40 to 125  , Input: t, Input: t, Input: t, Input: trrrr = t = t = t = tffff = 3 ns) = 3 ns) = 3 ns) = 3 ns) Characteristics Minimum pulse width (CK) Minimum pulse width (CLR/LOAD) Minimum setup time (Q/D1 to Q/D8 -CLR/LOAD) Minimum setup time (SI-CK) Minimum hold time (Q/D1 to Q/D8 -CLR/LOAD) Minimum hold time (SI-CK) Minimum removal time (CLR/LOAD-CK) Symbol tw(L),tw(H) tw(L) tS tS th th trem Test Condition VCC (V) 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 Limit 8.0 6.0 7.0 6.0 8.0 7.0 8.0 5.0 1.0 1.0 1.0 1.5 5.0 3.0 Unit ns ns ns ns ns ns ns 2016-08-05 Rev.2.0 ©2016 Toshiba Corporation

(CK-Q/D1 to Q/D8) Propagation delay time (CK-Q8',Q8C) Propagation delay time (CLR/LOAD-Q/D1 to Q/D8) Propagation delay time (CLR/LOAD-Q8',Q8C) Propagation delay time (Q/D8-Q8') 3-state output enable time (P/S CONT-Q/D1 to Q/D8) 3-state output disable time (P/S CONT-Q/D1 to Q/D8) Maximum clock frequency Input capacitance Bus I/O capacitance Power dissipation capacitance Symbol tPLH,tPHL tPLH,tPHL tPLH,tPHL tPLH,tPHL tPLH,tPHL tPZL,tPZH tPLZ,tPHZ fMAX CIN CI/O CPD Note (Note 1) Test Condition RL = 1 kΩ RL = 1 kΩ Q/D1 to Q/D8 P/S CONT = L (Parallel Outputs) P/S CONT = H (Parallel Inputs) VCC (V) 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 CL (pF) Min 103 Typ. 9.3 12.1 6.7 9.1 9.0 11.8 6.4 8.7 7.9 10.2 6.2 8.0 8.0 10.3 6.2 8.1 9.5 11.8 6.7 8.4 6.7 9.9 5.0 7.6 10.1 7.8 107 149 109 102 Max 14.7 19.0 9.7 13.1 14.4 18.6 9.4 12.7 11.7 15.1 8.4 11.1 11.8 15.3 8.5 11.2 15.2 18.9 9.6 12.2 10.4 15.4 7.3 11.0 12.8 9.8 Unit ns ns ns ns ns ns ns MHz pF pF pF Note 1: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation. ICC(opr) = CPD × VCC × fIN + ICC 2016-08-05 Rev.2.0 ©2016 Toshiba Corporation

(Unless otherwise specified, T(Unless otherwise specified, T(Unless otherwise specified, T(Unless otherwise specified, Taaaa = -40 to 85 = -40 to 85 = -40 to 85 = -40 to 85  , Input: t, Input: t, Input: t, Input: trrrr = t = t = t = tffff = 3 ns) = 3 ns) = 3 ns) = 3 ns) Characteristics Propagation delay time (CK-Q/D1 to Q/D8) Propagation delay time (CK-Q8',Q8C) Propagation delay time (CLR/LOAD-Q/D1 to Q/D8) Propagation delay time (CLR/LOAD-Q8',Q8C) Propagation delay time (Q/D8-Q8') 3-state output enable time (P/S CONT-Q/D1 to Q/D8) 3-state output disable time (P/S CONT-Q/D1 to Q/D8) Maximum clock frequency Input capacitance Symbol tPLH,tPHL tPLH,tPHL tPLH,tPHL tPLH,tPHL tPLH,tPHL tPZL,tPZH tPLZ,tPHZ fMAX CIN Test Condition RL = 1 kΩ RL = 1 kΩ VCC (V) 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 CL (pF) Min 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Max 16.7 21.6 11.1 14.9 16.4 21.2 10.7 14.5 13.4 17.2 9.6 12.6 13.5 17.5 9.7 12.8 17.3 21.6 10.9 13.9 11.9 17.6 8.3 12.5 13.7 10.6 Unit ns ns ns ns ns ns ns MHz pF 2016-08-05 Rev.2.0 ©2016 Toshiba Corporation

(Unless otherwise specified, T(Unless otherwise specified, T(Unless otherwise specified, T(Unless otherwise specified, Taaaa = -40 to 125 = -40 to 125 = -40 to 125 = -40 to 125  , Input: t, Input: t, Input: t, Input: trrrr = t = t = t = tffff = 3 ns) = 3 ns) = 3 ns) = 3 ns) Characteristics Propagation delay time (CK-Q/D1 to Q/D8) Propagation delay time (CK-Q8',Q8C) Propagation delay time (CLR/LOAD-Q/D1 to Q/D8) Propagation delay time (CLR/LOAD-Q8',Q8C) Propagation delay time (Q/D8-Q8') 3-state output enable time (P/S CONT-Q/D1 to Q/D8) 3-state output disable time (P/S CONT-Q/D1 to Q/D8) Maximum clock frequency Input capacitance Symbol tPLH,tPHL tPLH,tPHL tPLH,tPHL tPLH,tPHL tPLH,tPHL tPZL,tPZH tPLZ,tPHZ fMAX CIN Test Condition RL = 1 kΩ RL = 1 kΩ VCC (V) 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 CL (pF) Min 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Max 18.5 23.5 12.5 16.5 18.0 23.0 12.0 16.0 15.0 19.0 10.5 14.0 15.0 19.0 10.5 14.0 19.0 23.5 12.0 15.5 13.0 19.5 9.0 13.5 14.5 11.5 Unit ns ns ns ns ns ns ns MHz pF Characteristics Quiet output maximum dynamic VOL Quiet output minimum dynamic VOL Minimum high-level dynamic input voltage Maximum low-level dynamic input voltage Symbol VOLP VOLV VIHD VILD Test Condition CL = 50 pF CL = 50 pF CL = 50 pF CL = 50 pF VCC (V) 5.0 5.0 5.0 5.0 Typ. 0.6 -0.5 Limit 1.0 -1.0 3.5 1.5 Unit V V V V 2016-08-05 Rev.2.0 ©2016 Toshiba Corporation

  1. 13. 13. 13. Internal Equivalent CircuitInternal Equivalent CircuitInternal Equivalent CircuitInternal Equivalent Circuit Package DimensionsPackage DimensionsPackage DimensionsPackage Dimensions Unit: mm Weight: 0.055 g (typ.) Package Name(s) Nickname: TSSOP16B 2016-08-05 Rev.2.0 ©2016 Toshiba Corporation

RESTRICTIONS ON PRODUCT USERESTRICTIONS ON PRODUCT USERESTRICTIONS ON PRODUCT USERESTRICTIONS ON PRODUCT USE

  • Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice.
  • This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
  • Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
  • PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIREPRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIREPRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIREPRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAYEXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAYEXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAYEXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACTCAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACTCAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACTCAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE").("UNINTENDED USE").("UNINTENDED USE").("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FORIF YOU USE PRODUCT FORIF YOU USE PRODUCT FORIF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT.UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT.UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT.UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative.
  • Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
  • Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations.
  • The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
  • ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALEABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALEABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALEABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDINGINCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDINGINCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDINGINCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, ANDWITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, ANDWITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, ANDWITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAROR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAROR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAROR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
  • Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
  • Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS. 2016-08-05 Rev.2.0 ©2016 Toshiba Corporation