74VHC153 FAIRCHILD

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 7

Technical content

Features

■ High Speed: tPD = 5.0 ns at TA = 25°C ■ Low power dissipation: ICC = 4 µA (max) at TA = 25°C ■ High noise immunity: VNIH = VNIL = 28% VCC (min) ■ Power down protection is provided on all inputs ■ Pin and function compatible with 74HC153 Ordering Code: Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbols IEEC/IEC Connection Diagram Pin Descriptions Order Number Package Number Package Description 74VHC153M M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow 74VHC153SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74VHC153MTC MTC16 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74VHC153N N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Pin Names Description I0a–I3a Side A Data Inputs I0b–I3b Side B Data Inputs S0, S1 Common Select Inputs Ea Side A Enable Input Eb Side B Enable Input Za Side A Output Zb Side B Output

www.fairchildsemi.com 2 74VHC153 Functional Description The VHC153 is a dual 4-input multiplexer. It can select two bits of data from up to four sources under the control of the common Select inputs (S 0, S1). The two 4-input multiplexer circuits have individual active-LOW Enables (Ea, Eb) which can be used to strobe the outputs independently. When the Enables (Ea, Eb) are HIGH, the corresponding outputs (Za, Zb) are forced LOW. The VHC153 is the logic implementa- tion of a 2-pole, 4-position switch, where the position of the switch is determined by the logic levels supplied to the Select inputs. The logic equations for the outputs are shown below. Z a = Ea • (I0a • S1 • S0 + I1a • S1 • S0 + I2a • S1 • S0 + I3a • S1 • S0) Zb = Eb • (I0b • S1 • S0 + I1b • S1 • S0 + I2b • S1 • S0 + I3b • S1 • S0) Truth Table H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Logic Diagram Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. Select Inputs (a or b) Output Inputs S0 S1 E I0 I1 I2 I3 Z XXHXXXX L LLLLXXX L LLLHXXX H HLLXLXX L HLLXHXX H LHLXXLX L LHLXXHX H HHLXXXL L HHLXXXH H

3 www.fairchildsemi.com 74VHC153 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) Note 1: Absolute maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input load- ing variables. Fairchild does not recommend operation outside databook specifications. Note 2: Unused inputs must be held HIGH or LOW. They may not float. Supply Voltage (VCC ) −0.5V to +7.0V DC Input Voltage (VIN) −0.5V to + 7.0V DC Output Voltage (VOUT ) −0.5V to VCC + 0.5V Input Diode Current (IIK) −20 mA Output Diode Current (IOK ) ±20 mA DC Output Current (IOUT ) ±25 mA DC V CC /GND Current (ICC ) ±50 mA Storage Temperature (TSTG ) −65°C to +150°C Lead Temperature (TL) (Soldering, 10 seconds) 260 °C Supply Voltage (VCC ) 2.0V to 5.5V Input Voltage (VIN)0 V t o +5.5 Output Voltage (VOUT )0 V t o V CC Operating Temperature (TOPR ) −40°C to +85°C Input Rise and Fall Time (tr, tf) VCC = 3.3V ± 0.3V 0 ∼100 ns/V VCC = 5.0V ± 0.5V 0 ∼20 ns/V Symbol Parameter VCC (V) TA = 25°CT A = −40°C to +85°C Units Conditions Min Typ Max Min Max VIH HIGH Level Input 2.0 1.50 1.50 V Voltage 3.0 − 5.5 0.7 VCC 0.7 VCC VIL LOW Level Input 2.0 0.50 0.50 V Voltage 3.0 − 5.5 0.3 V CC 0.3 VCC VOH HIGH Level Output 2.0 1.9 2.0 1.9 V IN = VIH IOH = −50 µA Voltage 3.0 2.9 3.0 2.9 V or V IL 4.5 4.4 4.5 4.4 3.0 2.58 2.48 V IOH = −4 mA 4.5 3.94 3.80 I OH = −8 mA VOL LOW Level Output 2.0 0.0 0.1 0.1 V IN = VIH IOL = 50 µA Voltage 3.0 0.0 0.1 0.1 V or V IL 4.5 0.0 0.1 0.1 3.0 0.36 0.44 V IOL = 4 mA 4.5 0.36 0.44 I OL = 8 mA IIN Input Leakage Current 0 − 5.5 ±0.1 ±1.0 µAV IN = 5.5V or GND ICC Quiescent Supply Current 5.5 4.0 40.0 µAV IN = VCC or GND

www.fairchildsemi.com 4 74VHC153 Note 3: C PD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr.) = CPD * VCC * fIN + ICC . Symbol Parameter VCC (V) TA = 25°CT A =−40°C to +85°C Units Conditions Min Typ Max Min Max ns C L = 15 pF tPHL In to Zn 10.2 15.4 1.0 17.5 C L = 50 pF ns C L = 15 pF 6.5 9.7 1.0 11.0 C L = 50 pF ns C L = 15 pF tPHL Sn to Zn 13.3 20.2 1.0 23.0 C L = 50 pF ns C L = 15 pF 8.3 11.9 1.0 13.5 C L = 50 pF ns C L = 15 pF tPHL En to Zn 8.8 13.6 1.0 15.5 C L = 50 pF ns C L = 15 pF 5.9 8.4 1.0 9.5 C L = 50 pF C IN Input Capacitance 4 10 10 pF V CC = Open C PD Power Dissipation 20 pF (Note 3) Capacitance

5 www.fairchildsemi.com 74VHC153 Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Number M16A 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M16D

www.fairchildsemi.com 6 74VHC153 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. 74VHC153 Dual 4-Input Multiplexer LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N16E