74VHC153_07 FAIRCHILD

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 9

Technical content

Features

High Speed: t PD 5.0ns at T A 25°C Low power dissipation: I CC 4µA (Max.) at T A 25°C High noise immunity: V NIH V NIL 28% V CC (Min.) Power down protection is provided on all inputs Pin and function compatible with 74HC153 General Description The VHC153 is an advanced high-speed CMOS device fabricated with silicon gate CMOS technology. It achieves the high-speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The VHC153 is a high-speed Dual 4-Input Multiplexer with common select inputs and indi- vidual enable inputs for each section. It can select two lines of data from four sources. The two buffered outputs present data in the true (non-inverted) form. In addition to multiplexer operation, the VHC153 can act as a func- tion generator and generate any two functions of three variables. An input protection circuit insures that 0V to 7V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5V to 3V systems and two supply systems such as battery backup. This circuit prevents device destruction due to mismatched supply and input voltages.

Ordering Information

Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter “X” to the ordering number. Connection Diagram Pin Description Order Number Package Number Package Description 74VHC153M M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74VHC153SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74VHC153MTC MTC16 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Pin Names Description I Side A Data Inputs I Side B Data Inputs S , S Common Select Inputs E a Side A Enable Input E b Side B Enable Input Z a Side A Output Z b Side B Output

74VHC153 Dual 4-Input Multiplexer ©1993 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VHC153 Rev. 1.2 2 Logic Symbols IEEC/IEC Functional Description The VHC153 is a dual 4-input multiplexer. It can select two bits of data from up to four sources under the control of the common Select inputs (S , S ). The two 4-input multi- plexer circuits have individual active-LOW Enables (E a E b ) which can be used to strobe the outputs indepen- dently. When the Enables (E a , E b ) are HIGH, the corre- sponding outputs (Z a , Z b ) are forced LOW. The VHC153 is the logic implementation of a 2-pole, 4-position switch, where the position of the switch is determined by the logic levels supplied to the Select inputs. The logic equations for the outputs are shown below. Z a E a

  • (I
  • S
  • S + I
  • S
  • S + I
  • S
  • S + I
  • S
  • S Z b E b
  • (I
  • S
  • S + I
  • S
  • S + I
  • S
  • S + I
  • S
  • S Truth Table H HIGH Voltage Level L LOW Voltage Level X Immaterial Select Inputs (a or b) OutputInputs S S E I I I I Z XXHXXXX L LLLLXXX L LLLH XXX H HL LXLXX L HLL XHXX H LHLXXLX L LHLXXHX H HHL XXXL L HHL XXXH H

74VHC153 Dual 4-Input Multiplexer ©1993 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VHC153 Rev. 1.2 3 Logic Diagram Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.

74VHC153 Dual 4-Input Multiplexer ©1993 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VHC153 Rev. 1.2 4 Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Recommended Operating Conditions (1) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Note: 1. Unused inputs must be held HIGH or LOW. They may not float. Symbol Parameter Rating V CC Supply Voltage –0.5V to +7.0V V IN DC Input Voltage –0.5V to +7.0V V OUT DC Output Voltage –0.5V to V CC + 0.5V I IK Input Diode Current –20mA I OK Output Diode Current ±20mA I OUT DC Output Current ±25mA I CC DC V CC / GND Current ±50mA T STG Storage Temperature –65°C to +150°C T L Lead Temperature (Soldering, 10 seconds) 260°C Symbol Parameter Rating V CC Supply Voltage 2.0V to +5.5V V IN Input Voltage 0V to +5.5V V OUT Output Voltage 0V to V CC T OPR Operating Temperature –40°C to +85°C t r , t f Input Rise and Fall Time, V CC 3.3V ± 0.3V V CC 5.0V ± 0.5V 0ns/V 100ns/V 0ns/V 20ns/V

74VHC153 Dual 4-Input Multiplexer ©1993 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VHC153 Rev. 1.2 5 Note: 2. C PD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: I CC (opr.) C PD

  • V CC
  • f IN + I CC Symbol Parameter V CC (V) Conditions TA = 25°C TA = –40°C to +85°C VIH HIGH Level Input Voltage 2.0 1.50 1.50 V 3.0–5.5 0.7 x V CC 0.7 x VCC VIL LOW Level Input Voltage 2.0 0.50 0.50 V 3.0–5.5 0.3 x V CC 0.3 x VCC VOH HIGH Level Output Voltage

2.0 V IN = VIH

IOH = –50µA 1.9 2.0 1.9 V 3.0 2.9 3.0 2.9 4.5 4.4 4.5 4.4 3.0 I OH = –4mA 2.58 2.48 4.5 I OH = –8mA 3.94 3.80 VOL LOW Level Output Voltage IOL = 50µA 0.0 0.1 0.1 V 3.0 0.0 0.1 0.1 4.5 0.0 0.1 0.1 3.0 I OL = 4mA 0.36 0.44 4.5 I OL = 8mA 0.36 0.44 IIN Input Leakage Current 0–5.5 V IN = 5.5V or GND ±0.1 ±1.0 µA ICC Quiescent Supply Current 5.5 V IN = VCC or GND 4.0 40.0 µA Symbol Parameter V CC (V) Conditions TA = 25°C TA = –40°C to +85°C tPLH, tPHL Propagation Delay, In to Zn CL = 50pF 10.2 15.4 1.0 17.5 CL = 50pF 6.5 9.7 1.0 11.0 tPLH, tPHL Propagation Delay, Sn to Zn CL = 50pF 13.3 20.2 1.0 23.0 CL = 50pF 8.3 11.9 1.0 13.5 tPLH, tPHL Propagation Delay, En to Zn CL = 50pF 8.8 13.6 1.0 15.5 CL = 50pF 5.9 8.4 1.0 9.5 CIN Input Capacitance V CC = Open 4 10 10 pF CPD Power Dissipation Capacitance (2) 20 pF

Dimensions are in millimeters unless otherwise noted. Figure 1. 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow

Dimensions are in millimeters unless otherwise noted. Figure 2. 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide

Dimensions are in millimeters unless otherwise noted. Figure 3. 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

74VHC153 Dual 4-Input Multiplexer ©1993 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VHC153 Rev. 1.2 9 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx Across the board. Around the world.™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ CTL™ Current Transfer Logic™ DOME™ E CMOS™ EcoSPARK EnSigna™ FACT Quiet Series™ FACT FAST FASTr™ FPS™ FRFET GlobalOptoisolator™ GTO™ HiSeC™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ MICROCOUPLER™ MicroPak™ MICROWIRE™ Motion-SPM™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC OPTOPLANAR PACMAN™ PDP-SPM™ POP™ Power220 Power247 PowerEdge™ PowerSaver™ Power-SPM™ PowerTrench Programmable Active Droop™ QFET QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ ScalarPump™ SMART START™ SPM STEALTH™ SuperFET™ SuperSOT™ -3 SuperSOT™ -6 SuperSOT™ -8 SyncFET™ TCM™ The Power Franchise TinyBoost™ TinyBuck™ TinyLogic TINYOPTO™ TinyPower™ TinyWire™ TruTranslation™ µSerDes™ UHC UniFET™ VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production First Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I26