74LVT244_08 FAIRCHILD
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 10
Technical content
Features
Input and output interface capability to systems at 5V V CC Bushold data inputs eliminate the need for external pull-up resistors to hold unused inputs (74LVTH244), also available without bushold feature (74LVT244) Live insertion/extraction permitted Power Up/Down high impedance provides glitch-free bus loading Outputs source/sink –32mA/+64mA Functionally compatible with the 74 series 244 Latch-up performance exceeds 500mA ESD performance: – Human-body model 2000V – Machine model 200V – Charged-device model 1000V General Description The LVT244 and LVTH244 are octal buffers and line drivers designed to be employed as memory address drivers, clock drivers and bus oriented transmitters or receivers which provide improved PC board density. The LVTH244 data inputs include bushold, eliminating the need for external pull-up resistors to hold unused inputs. These octal buffers and line drivers are designed for low- voltage (3.3V) V CC applications, but with the capability to provide a TTL interface to a 5V environment. The LVT244 and LVTH244 are fabricated with an advanced BiCMOS technology to achieve high speed operation similar to 5V ABT while maintaining low power dissipation.
Ordering Information
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. Order Number Package Number Package Description 74LVT244WM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide 74LVT244SJ M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74LVT244MSA MSA20 20-Lead Shrink Small Outline Package (SSOP), JEDEC MO-150, 5.3mm Wide 74LVT244MTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74LVTH244WM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide 74LVTH244SJ M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74LVTH244MSA MSA20 20-Lead Shrink Small Outline Package (SSOP), JEDEC MO-150, 5.3mm Wide 74LVTH244MTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com 74LVT244, 74LVTH244 Rev. 1.5.0 2 74LVT244, 74LVTH244 — Low Voltage Octal Buffer/Line Driver with 3-STATE Outputs Connection Diagram Pin Description Logic Symbol IEEE/IEC Truth Tables H HIGH Voltage Level L LOW Voltage Level X Immaterial Z High Impedance Pin Names Description OE , OE 3-STATE Output Enable Inputs I Inputs O Output Inputs Outputs (Pins 12, 14, 16, 18)OE I n LL L LH H HX Z Inputs Outputs (Pins 3, 5, 7, 9)OE I n LL L LH H HX Z
©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com 74LVT244, 74LVTH244 Rev. 1.5.0 3 74LVT244, 74LVTH244 — Low Voltage Octal Buffer/Line Driver with 3-STATE Outputs Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Note: 1. I O Absolute Maximum Rating must be observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter Rating V CC Supply Voltage –0.5V to +4.6V V I DC Input Voltage –0.5V to +7.0V V O DC Output Voltage Output in 3-STATE –0.5V to +7.0V Output in HIGH or LOW State (1) –0.5V to +7.0V I IK DC Input Diode Current, V I GND –50mA I OK DC Output Diode Current, V O GND –50mA I O DC Output Current, V O V CC Output at HIGH State 64mA Output at LOW State 128mA I CC DC Supply Current per Supply Pin ±64mA I GND DC Ground Current per Ground Pin ±128mA T STG Storage Temperature –65°C to +150°C Symbol Parameter Min Max Units V CC Supply Voltage 2.7 3.6 V V I Input Voltage 0 5.5 V I OH HIGH-Level Output Current –32 mA I OL LOW-Level Output Current 64 mA T A Free-Air Operating Temperature –40 85 °C t V Input Edge Rate, V IN 0.8V–2.0V, V CC 3.0V 0 10 ns/V
©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com 74LVT244, 74LVTH244 Rev. 1.5.0 4 74LVT244, 74LVTH244 — Low Voltage Octal Buffer/Line Driver with 3-STATE Outputs Notes: 2. All typical values are at V CC 3.3V, T A 25°C. 3. Applies to bushold versions only (74LVTH244). 4. An external driver must source at least the specified current to switch from LOW-to-HIGH. 5. An external driver must sink at least the specified current to switch from HIGH-to-LOW. 6. This is the increase in supply current for each input that is at the specified voltage level rather than V CC or GND. Symbol Parameter V CC (V) Conditions T A –40°C to +85°C UnitsMin. Typ. (2) Max. V IK Input Clamp Diode Voltage 2.7 I I –18mA –1.2 V V IH Input HIGH Voltage 2.7–3.6 V O 0.1V or V O V CC – 0.1V 2.0 V V IL Input LOW Voltage 2.7–3.6 0.8 V V OH Output HIGH Voltage 2.7–3.6 I OH –100µA V CC –0.2 V 2.7 I OH –8mA 2.4 3.0 I OH –32mA 2.0 V OL Output LOW Voltage 2.7 I OL 100µA 0.2 V I OL 24mA 0.5 3.0 I OL 16mA 0.4 I OL 32mA 0.5 I OL 64mA 0.55 I I(HOLD) (3) Bushold Input Minimum Drive 3.0 V I 0.8V 75 µA V I 2.0V –75 I I(OD) (3) Bushold Input Over-Drive Current to Change State 3.0 (4) 500 µA (5) –500 I I Input Current 3.6 V I 5.5V 10 µA Control Pins 3.6 V I 0V or V CC Data Pins 3.6 V I = 0V –5 VI = VCC 1 IOFF Power Off Leakage Current 0 0V ≤ VI or VO ≤ 5.5V ±100 µA IPU/PD Power up/down 3-STATE Output Current 0–1.5V V O = 0.5V to 3.0V, VI = GND or VCC ±100 µA IOZL 3-STATE Output Leakage Current 3.6 V O = 0.5V –5 µA IOZH 3-STATE Output Leakage Current 3.6 V O = 3.0V 5 µA IOZH+ 3-STATE Output Leakage Current 3.6 V CC < VO ≤ 5.5V 10 µA ICCH Power Supply Current 3.6 Outputs HIGH 0.19 mA ICCL Power Supply Current 3.6 Outputs LOW 5 mA ICCZ Power Supply Current 3.6 Outputs Disabled 0.19 mA ICCZ+P ower Supply Current 3.6 V CC ≤ VO ≤ 5.5V, Outputs Disabled 0.19 mA ∆ICC Increase in Power Supply Current(6) 3.6 One Input at V CC – 0.6V, Other Inputs at VCC or GND 0.2 mA
©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com 74LVT244, 74LVTH244 Rev. 1.5.0 5 74LVT244, 74LVTH244 — Low Voltage Octal Buffer/Line Driver with 3-STATE Outputs Dynamic Switching Characteristics(7) Notes: 7. Characterized in SOIC package. Guaranteed parameter, but not tested. 8. Max number of outputs defined as (n). n–1 data inputs are driven 0V to 3V. Output under test held LOW. Notes: 9. All typical values are at V CC = 3.3V, TA = 25°C. 10. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (t OSHL) or LOW-to-HIGH (tOSLH). Parameter guaranteed by design. Capacitance(11) Note: 11. Capacitance is measured at frequency f = 1MHz, per MIL-STD-883, Method 3012. Symbol Parameter V CC (V) Conditions T A = 25°C UnitsCL = 50pF, RL = 500Ω Min. Typ. Max. VOLP Quiet Output Maximum Dynamic VOL 3.3 (8) 0.8 V VOLV Quiet Output Minimum Dynamic VOL 3.3 (8) –0.8 V Symbol Parameter TA = –40°C to +85°C CL = 50pF, RL = 500Ω Units VCC = 3.3V ± 0.3V V CC = 2.7V tPLH Propagation Delay, Data to Output 1.1 3.8 1.1 4.0 ns tPHL 1.3 3.9 1.3 4.2 tPZH Output Enable Time 1.1 4.5 1.1 5.3 ns tPZL 1.4 4.4 1.4 5.0 tPHZ Output Disable Time 1.9 4.9 1.9 5.1 ns tPLZ 1.8 4.4 1.8 4.4 tOSHL, tOSLH Output to Output Skew(10) 1.0 1.0 ns Symbol Parameter Conditions Typical Units CIN Input Capacitance V CC = 0V, VI = 0V or VCC 3p F COUT Output Capacitance V CC = 3.0V, VO = 0V or VCC 6p F
Figure 1. 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide specifically the warranty therein, which covers Fairchild products. B) ALL DIMENSIONS ARE IN MILLIMETERS.
2.65 MAX
Figure 2. 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide specifically the warranty therein, which covers Fairchild products.
Figure 3. 20-Lead Shrink Small Outline Package (SSOP), JEDEC MO-150, 5.3mm Wide specifically the warranty therein, which covers Fairchild products.
Figure 4. 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide specifically the warranty therein, which covers Fairchild products.
©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com 74LVT244, 74LVTH244 Rev. 1.5.0 10 TRADEMARKS Thef ollowing includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK EZSWITCH™ * Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FlashWriter®* FPS™ FRFET Global Power Resource SM Green FPS™ Green FPS™e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC OPTOPLANAR® PDP-SPM™ Power220® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™ -6 SuperSOT™ -8 SupreMOS™ SyncFET™ The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC Ultra FRFET™ UniFET™ VCX™ *E Z S W ITCH™ and FlashWriter ® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHERDOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I33 74LVT244, 74LVTH244 — Low Voltage Octal Buffer/Line Driver with 3-STATE Outputs