74LVT1403 NEXPERIA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 11

Technical content

Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS semiconductors with its focus on the automotive, industrial, computing, consumer and wearable application markets In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below. use http://www.nexperia.com salesaddresses@nexperia.com (email) Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on the version, as shown below: reserved Should be replaced with: - © Nexperia B.V. (year). All rights reserved. If you have any questions related to the data sheet, please contact our nearest sales office via e -mail or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and understanding, Kind regards, Team Nexperia

/C0109 /C0110 /C0114 74LVT1403 3.3V combined 8-bit bus receiver and 4-bit bus driver Product specification IC23 Data Handbook

1998 Nov 12

Philips Semiconductors Product specification 74LVT14033.3V combined 8-bit bus receiver and 4-bit bus driver

21998 Nov 12 853-2134 20359

FEATURES

  • 4-bit 74LVT125-like bus driver
  • 8-bit 74LVT14-like Schmitt trigger
  • Bus drive +64mA/–32mA
  • 7 bus inputs with common inversion control pin
  • 32-pin TSSOP footprint
  • DE pin with resistive pull up and active LOW for easier live insertion
  • DE pin includes Schmitt trigger with typical 0.6V hysteresis

DESCRIPTION

The 74LVT1403 is a high-performance BiCMOS product designed for VCC operation at 3.3V. This device combines the functionality of a 4-bit data path bus driver and 8-bit Schmitt trigger bus receiver, along with control logic in one 32-pin package. The receiver inputs are Schmitt trigger type capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. The receiver outputs are 74LVT14 style with +32mA/–20mA drive capability. The receiver inputs include the bus hold feature. The driver outputs feature power-up in 3-State/live insertion capability and are all controlled by the A/B, EN1, and EN2 control pins. The driver inputs include the bus hold feature. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS Tamb = 25°C; GND = 0V TYPICAL UNIT tPLH Propagation delay An to Yn C L = 50pF; VCC = 3.3V 4.5 ns tPHL Propagation delay An to Yn C L = 50pF; VCC = 3.3V 4.0 ns C IN Input capacitance VI = 0V or 3.0V 3 pF ICC Total supply current Outputs low, VCC = 3.6V 4 mA

ORDERING INFORMATION

PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER 32-pin plastic TSSOP –40°C to +85°C 74LVT1403 DR 74LVT1403 DR SOT487-1 PIN CONFIGURATION 16 17 32INV RY0 RY1 RY2 RY3 RY4 RY5 RY7 EN1 EN2 DA0 DA1 DA2 DA3 RY6 GND DE DY3 DY2 DY1 DY0 GND A/B RA7 RA6 RA5 RA4 RA3 RA2 RA1 RA0 V CC THIN SHRINK SMALL OUTLINE PACKAGE (TSSOP) SV00907 PIN DESCRIPTION PIN NUMBER SYMBOL NAME AND FUNCTION 25, 24 RA0–RA7 Receive Data inputs 2, 3, 4, 5, 6, 7, 8, 9RY0–RY7 Receive Data outputs 12, 13, 14, 15 DA0–DA3 Driver Data inputs 21, 20, 19, 18 DY0–DY3 Driver Data outputs 10, 11 EN1, EN2 Driver Output enables

23 A/B Mode control for en-

1 INV Inversion control

16, 22 GND Ground (0V)

32 VCC Positive supply voltage

17 DE Driver output enable ac-

Philips Semiconductors Product specification 74LVT14033.3V combined 8-bit bus receiver and 4-bit bus driver

1998 Nov 12 3

FUNCTION TABLE – RECEIVER INPUTS OUTPUTS RA0–RA7 INV RY0 RY1–RY7 L X H — H X L — L L — L H L — H L H — H H H — L H = High voltage level L = Low voltage level X = Don’t care — = Reported on different line FUNCTION TABLE – DRIVER CONTROL INPUTS OUTPUT CONDITION DE A/B EN1 EN2 DY Status L L L L A L L X H Z L L H X Z L H H H A L H X L Z L H L X Z H X X X Z H = High voltage level L = Low voltage level X = Don’t care Z = High impedance “off” state A = Active DATA PATH IN ACTIVE MODE INPUT OUTPUT DAn DYn L L H H

Philips Semiconductors Product specification 74LVT14033.3V combined 8-bit bus receiver and 4-bit bus driver

1998 Nov 12 4

ABSOLUTE MAXIMUM RATINGS 1, 2 SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +4.6 V VI DC input voltage3 –0.5 to +7.0 V VOUT DC output voltage3 Output in Off or High state –0.5 to +7.0 V DYn DC output current Output in Low state 128 mA IO DYn DC output current Output in High state –64 mA IOUT R Y nD Co u tput current Output in Low state –32 mA RYn DC output current Output in High state 64 mA IIK DC input diode current VI < 0 –50 mA IOK DC output diode current VO < 0 –50 mA Tstg Storage temperature range –65 to +150 °C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNITSYMBOL PARAMETER MIN MAX UNIT VCC DC supply voltage 2.7 3.6 V VI Input voltage 0 5.5 V VIH High-level input voltage 2.0 V VIL Low-level Input voltage 0.8 V IO High level output current DYn –32 mA IOH High-level output current RYn –20 mA Low level output current DYn 32 mA IOL Low-level output current RYn 32 mA Low-level output current; current duty cycle ≤ 50%, f ≥ 1kHz DYn 64 mA Δt/ΔV Input transition rise or fall rate; Outputs enabled 10 ns/V Tamb Operating free-air temperature range –40 +85 °C

Philips Semiconductors Product specification 74LVT14033.3V combined 8-bit bus receiver and 4-bit bus driver

1998 Nov 12 5

DC ELECTRICAL CHARACTERISTICS Over recommended operating conditions. Voltages are referenced to GND (ground = 0V). LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40°C to +85°C UNIT MIN TYP 1 MAX VT+ Positive-going thresholdRAn VCC = 3.3V 1.5 1.7 2.0 V VT– Negative-going threshold RAn VCC = 3.3V 0.9 1.1 1.3 V ΔVT Hysteresis RAn VCC = 3.3V 0.4 0.6 V VIK Input clamp voltage VCC = 2.7V; IIK = –18mA –1.2 V VCC = 2.7 to 3.6V; IOH = –100µA VCC –0.2 V RYn VCC = 2.7V; IOH = –6mA 2.4 V VOH High-level output VCC = 3.0V; IOH = –20mA 2.0 VVOH g voltage VCC = 2.7 to 3.6V; IOH = –100µA VCC –0.2 VCC –0.1 V DYn VCC = 2.7V; IOH = –8mA 2.4 2.5 V VCC = 3.0V; IOH = –32mA 2.0 2.2 V VCC = 2.7V; IOL = 100µA 0.2 V RYn VCC = 2.7V; IOL = 24mA 0.5 V VCC = 3.0V; IOL = 32mA 0.5 V VOL Low-level output voltage VCC = 2.7V; IOL = 100µA 0.1 0.2 VVOL Low -level out ut voltage VCC = 2.7V; IOL = 24mA 0.3 0.5 V DYn VCC = 3.0V; IOL = 16mA 0.25 0.4 V VCC = 3.0V; IOL = 32mA 0.3 0.5 V VCC = 3.0V; IOL = 64mA 0.4 0.55 V VCC = 0 or 3.6V; VI = 5.5V All inputs 1 10 VCC = 3.6V; VI = VCC Control pins ±0.1 ±1 II Input leakage current VCC =36 V;VI= GND INV, EN1, EN2, A/B ±0.1 ±1 µAII In ut leakage current VCC = 3.6V VI = GND DE –60 –100 VCC = 3.6V; VI = VCC Data port4 0.1 1 VCC = 3.6V; VI = GND Data ort4 –1 –5 µA IOFF Output off current VCC = 0V; VI or VO = 0 to 4.5V 1 ±100 µA IHOLD Bus hold current RA and DA VCC = 3V; VI = 0.8V 75 150 µAIHOLD inputs VCC = 3V; VI = 2.0V –75 –150 µA IEX Current into an output in the High state when VO > VCC VO = 5.5V; VCC = 3.0V 60 125 µA IPU/PD Power-up/down 3-State output current3 VCC ≤ 1.2V; VO = 0.5V to VCC ; VI = GND or VCC ; EN1, EN2, A/B, DE = Don’t care ±1 ±100 µA IOZH 3-State output high current VCC = 3.6V; VO = 3.0V 1 5 µA IOZL 3-State output low current VCC = 3.6V; VO = 0.5V –1 –5 µA ICCH VCC = 3.6V; Outputs High, VI = GND or VCC, IO = 0 0.13 0.19 mA ICCL Quiescent supply current VCC = 3.6V; Outputs Low, VI = GND or VCC, IO = 0 4 11 mA ICCZ VCC = 3.6V; Outputs Disabled, VI = GND or VCC, IO = 05 0.13 0.19 mA ΔICC Additional supply current per input pin2 VCC = 3V to 3.6V; One input at VCC –0.6V, Other inputs at VCC or GND 0.1 0.2 mA NOTES: 1. All typical values are at VCC = 3.3V and Tamb = 25°C. 2. This is the increase in supply current for each input at the specified voltage level other than VCC or GND. transition time of 100µsec is permitted. This parameter is valid for Tamb = 25°C only. 4. Unused pins at VCC or GND. 5. All RYn outputs High. All DYn outputs pulled up to VCC or pulled down to ground.

Philips Semiconductors Product specification 74LVT14033.3V combined 8-bit bus receiver and 4-bit bus driver

1998 Nov 12 6

RAn = Receive inputs; Ryn = Receive outputs DAn = Driver inputs; Dyn = Driver outputs LIMITS SYMBOL PARAMETER WAVEFORM VCC = 3.3V ± 0.3V VCC = 2.7V UNIT MIN TYP MAX MAX tPLH tPHL Propagation delay RA0 to RY0 2 1.0 1.0 3.8 3.2 5.7 4.4 6.9 4.3 ns tPLH tPHL Propagation delay RAn to RYn (n = 1 to 7) 1, 2 2.0 2.0 4.5 4.0 6.7 5.7 7.8 6.4 ns tPLH tPHL Propagation delay Invert to RYn 1, 2 2.0 2.0 4.0 3.6 6.3 5.5 7.1 7.4 ns tPLH tPHL Propagation delay DAn to DYn 1 1.0 1.0 3.1 2.0 4.2 3.0 4.7 3.5 ns tPZH tPZL Output enable time ENn to DYn with A/B = 0 3 2.0 2.0 4.8 4.3 7.1 6.7 9.6 7.4 ns tPZH tPZL Output enable time ENn to DYn with A/B = 1 4 2.0 2.0 4.3 4.0 6.5 6.1 7.8 6.6 ns tPHZ tPLZ Output disable time ENn to DYn with A/B =0 3 2.0 2.0 4.7 4.0 7.1 6.3 8.2 6.9 ns tPHZ tPLZ Output disable time ENn to DYn with A/B =1 4 2.0 2.0 4.2 4.0 6.8 6.2 8.3 6.5 ns tPZH tPZL Output enable time A/B to DYn 3, 4 2.0 2.0 5.0 4.2 8.6 6.5 9.5 7.2 ns tPHZ tPLZ Output disable time A/B to DYn 3, 4 2.0 2.0 5.1 4.3 7.5 6.2 7.7 6.6 ns tPZH tPZL Output enable time DE to DYn 3 2.0 2.0 5.1 4.7 7.6 6.8 9.1 7.5 ns tPHZ tPLZ Output disable time DE to DYn 3 2.0 2.0 5.9 4.9 9.3 7.2 9.7 7.7 ns AC WAVEFORMS VM = 1.5V, VIN = GND to 2.7V SV00897 An INPUT Yn OUTPUT 2.7V VOH VOL 1.5V 1.5V 1.5V1.5V tPHLtPLH INV INPUT Waveform 1. Input (An) to Output (Yn) Propagation Delays RAn INPUT RYn OUTPUT 2.7V VOH VOL 1.5V 1.5V 1.5V1.5V tPHL tPLH INV INPUT SV01015 Waveform 2. Input (An) to Output (Yn) Propagation Delays

Philips Semiconductors Product specification 74LVT14033.3V combined 8-bit bus receiver and 4-bit bus driver

1998 Nov 12 7

AC WAVEFORMS (Continued) VM = 1.5V, VIN = GND to 2.7V Yn OUTPUT 2.7V VOL + 0.3V VOL 1.5V 1.5V1.5V tPLZtPZL 3.0V VOH VOH – 0.3V tPZH Yn OUTPUT tPHZ SV00898 OE INPUT A/B INPUT Waveform 3. 3-State Output Enable and Disable Times OE INPUT Yn OUTPUT 2.7V VOL + 0.3V VOL 1.5V 1.5V1.5V tPLZtPZL 3.0V VOH VOH – 0.3V tPZH Yn OUTPUT tPHZ A/B INPUT SV01014 Waveform 4. 3-State Output Enable and Disable Times TEST CIRCUIT AND WAVEFORM VM VM tW AMP (V) NEGATIVE PULSE 10% 10% 90% 90% VM VM tW AMP (V) POSITIVE PULSE 90% 90% 10% 10% tTHL (tF) tTLH (tR )t THL (tF) tTLH (tR ) VM = 1.5V Input Pulse Definition DEFINITIONS R L = Load resistor; see AC CHARACTERISTICS for value. C L = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. R T = Termination resistance should be equal to ZOUT of pulse generators. INPUT PULSE REQUIREMENTS FAMILY 74LVT PULSE GENERATOR VIN D.U.T. VOUT C L VCC R L Test Circuit for 3-State Outputs 6.0V R T R L SV00092 Open GND SWITCH POSITION TEST SWITCH tPLH /tPHL tPLZ /tPZL tPHZ /tPZH Open GND Amplitude Rep. Rate t W tR tF 2.7V 10MHz 500ns 2.5ns 2.5ns

Philips Semiconductors Product specification 74LVT14033.3V combined 8-bit bus receiver and 4-bit bus driver

1998 Nov 12 8

TSSOP32: plastic thin shrink small outline package; 32 leads; body width 6.1 mm; lead pitch 0.65 mm SOT487-1

Philips Semiconductors Product specification 74LVT14033.3V combined 8-bit bus receiver and 4-bit bus driver

1998 Nov 12 9

Philips Semiconductors Product specification 74LVT14033.3V combined 8-bit bus receiver and 4-bit bus driver

1998 Nov 12 10

Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors

811 East Arques Avenue

P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381  Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. Date of release: 05-98 Document order number: 9397-750-04815 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.