74LV373 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 12
Technical content
/C0109 /C0110 /C0114 74LV373 Octal D-type transparent latch (3-State) Product specification Supersedes data of 1997 March 04 IC24 Data Handbook
1998 Jun 10
Philips Semiconductors Product specification 74LV373Octal D-type transparent latch (3-State)
21998 Jun 10 853–1934 19545
FEATURES
- Wide operating voltage: 1.0 to 5.5V
- Optimized for Low Voltage applications: 1.0V to 3.6V
- Accepts TTL input levels between VCC = 2.7V and VCC = 3.6V
- Typical VOLP (output ground bounce) < 0.8V at VCC = 3.3V, Tamb = 25°C
- Typical VOHV (output VOH undershoot) > 2V at VCC = 3.3V, Tamb = 25°C
- Common 3-State output enable input
- Output capability: bus driver
- ICC category: MSI
DESCRIPTION
The 74LV373 is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC/HCT373. The 74LV373 is an octal D-type transparent latch featuring separate D-type inputs for each latch and 3-State outputs for bus oriented applications. A latch enable (LE) input and an output enable (OE) input are common to all internal latches. The ‘373’ consists of eight D-type transparent latches with 3-State true outputs. When LE is HIGH, data at the Dn inputs enters the latches. In this condition the latches are transparent, i.e., a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the D-inputs a set-up time preceding the HIGH-to-LOW transition of LE. When OE is LOW, the contents of the eight latches are available at the outputs. When OE is HIGH, the outputs go to the high impedance OFF-state. Operation of the OE input does not affect the state of the latches. The ‘373’ is functionally identical to the ‘573’, but the ‘573’ has a different pin arrangement. QUICK REFERENCE DATA GND = 0V; Tamb = 25°C; tr = tf 2.5 ns SYMBOL PARAMETER CONDITIONS TYPICAL UNIT tPHL /tPLH Propagation delay D n to Qn LE to Qn C L = 15pF VCC = 3.3V 10 ns C I Input capacitance 3.5 pF C PD Power dissipation capacitance per latchNotes 1, 2 22 pF NOTES: 1. CPD is used to determine the dynamic power dissipation (PD in µW) PD = CPD VCC 2 x fi (CL VCC 2 fo) where: fi = input frequency in MHz; CL = output load capacity in pF; fo = output frequency in MHz; VCC = supply voltage in V; (CL VCC 2 fo) = sum of the outputs. 2. The condition is VI = GND to VCC. ORDERING AND PACKAGE INFORMATION PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA PKG. DWG. # 20-Pin Plastic DIL –40°C to +125°C 74LV373 N 74LV373 N SOT146-1 20-Pin Plastic SO –40°C to +125°C 74LV373 D 74LV373 D SOT163-1 20-Pin Plastic SSOP Type II –40°C to +125°C 74LV373 DB 74LV373 DB SOT339-1 20-Pin Plastic TSSOP Type I –40°C to +125°C 74LV373 PW 74LV373PW DH SOT360-1 PIN DESCRIPTION PIN NUMBER SYMBOL FUNCTION
1 OE Output enabled input (active LOW)
2, 5, 6, 9, 12, 15, 16, 19 Q 0–Q 7 3-State latch outputs 3, 4, 7, 8, 13, 14, 17, 18 D 0–D 7 Data inputs
10 GND Ground (0V)
11 LE Latch enable input (active HIGH)
20 VCC Positive supply voltage
Philips Semiconductors Product specification 74LV373Octal D-type transparent latch (3-State)
1998 Jun 10 3
LOGIC SYMBOL (IEEE/IEC) SV00659 EN1 FUNCTIONAL DIAGRAM SV00660 Q 0 Q 1 Q 2 Q 3 Q 4 Q 5 Q 6 Q 7 D 0 D 1 D 2 D 3 D 4 D 5 D 6 D 7 LE LATCH 1 to 8 3–STATE OUTPUTS OE LOGIC DIAGRAM LATCH D Q LE LE D 0 LATCH D Q LE LE D 1 LATCH D Q LE LE D 2 LATCH D Q LE LE D 3 LATCH D Q LE LE D 4 LATCH D Q LE LE D 5 LATCH D Q LE LE D 6 LATCH D Q LE LE D 7 LE OE SV00661
Philips Semiconductors Product specification 74LV373Octal D-type transparent latch (3-State)
1998 Jun 10 4
OE LE Dn LATCHES Q 0 to Q7 Enable and read register (transparent mode) L L H H L H L H L H Latch and read register L L L L I h L H L H Latch register and disable outputsH H L L I h L H Z Z H = HIGH voltage level h = HIGH voltage level one set-up time prior to the HIGH-to-LOW LE transition L = LOW voltage level I = LOW voltage level one set-up time prior to the HIGH-to-LOW LE transition X = Don’t care Z = High impedance OFF-state RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER CONDITIONS MIN TYP. MAX UNIT VCC DC supply voltage See Note1 1.0 3.3 5.5 V VI Input voltage 0 – VCC V VO Output voltage 0 – VCC V Tamb Operating ambient temperature range in free air See DC and AC characteristics –40 –40 +85 +125 °C tr, tf Input rise and fall times VCC = 1.0V to 2.0V VCC = 2.0V to 2.7V VCC = 2.7V to 3.6V VCC = 3.6V to 5.5V 500 200 100 ns/V NOTE: ABSOLUTE MAXIMUM RATINGS 1, 2 In accordance with the Absolute Maximum Rating System (IEC 134). Voltages are referenced to GND (ground = 0V). SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +7.0 V ±IIK DC input diode current VI < –0.5 or VI > VCC + 0.5V 20 mA ±IOK DC output diode current VO < –0.5 or VO > VCC + 0.5V 50 mA ±IO DC output source or sink current – bus driver outputs –0.5V < VO < VCC + 0.5V 35 mA ±IGND , ±ICC DC V CC or GND current for types with –bus driver outputs 70 mA Tstg Storage temperature range –65 to +150 °C Power dissipation per package for temperature range: –40 to +125°C Ptt –plastic DIL above +70°C derate linearly with 12mW/K 750 mWPtot –plastic mini-pack (SO) above +70°C derate linearly with 8 mW/K 500 mW –plastic shrink mini-pack (SSOP and TSSOP)above +60°C derate linearly with 5.5 mW/K 400 NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
Philips Semiconductors Product specification 74LV373Octal D-type transparent latch (3-State)
1998 Jun 10 5
Over recommended operating conditions. Voltages are referenced to GND (ground = 0V). LIMITS SYMBOL PARAMETER TEST CONDITIONS -40°C to +85°C -40°C to +125°C UNIT MIN TYP 1 MAX MIN MAX VCC = 1.2V 0.9 0.9 V HIGH level Input VCC = 2.0V 1.4 1.4 VVIH voltage VCC = 2.7 to 3.6V 2.0 2.0 V VCC = 4.5 to 5.5V 0.7*VCC 0.7*VCC VCC = 1.2V 0.3 0.3 V LOW level Input VCC = 2.0V 0.6 0.6 VVIL voltage VCC = 2.7 to 3.6V 0.8 0.8 V VCC = 4.5 to 5.5 0.3*VCC 0.3*VCC VCC = 1.2V; VI = VIH or VIL; –IO = 100µA 1.2 HIGH l l t t VCC = 2.0V; VI = VIH or VIL; –IO = 100µA 1.8 2.0 1.8 HIGH level output voltage;all outputs VCC = 2.7V; VI = VIH or VIL; –IO = 100µA 2.5 2.7 2.5 VOH voltage all out uts VCC = 3.0V; VI = VIH or VIL; –IO = 100µA 2.8 3.0 2.8 VVOH VCC = 4.5V; VI = VIH or VIL; –IO = 100µA 4.3 4.5 4.3 V HIGH level output voltage;BUS driver VCC = 3.0V; VI = VIH or VIL; –IO = 8mA 2.40 2.82 2.20 voltage; BUS driver outputs VCC = 4.5V; VI = VIH or VIL; –IO = 16mA 3.60 4.20 3.50 VCC = 1.2V; VI = VIH or VIL; IO = 100µA 0 LOW l l t t VCC = 2.0V; VI = VIH or VIL; IO = 100µA 0 0.2 0.2 LOW level output voltage;all outputs VCC = 2.7V; VI = VIH or VIL; IO = 100µA 0 0.2 0.2 VOL voltage all out uts VCC = 3.0V; VI = VIH or VIL; IO = 100µA 0 0.2 0.2 VVOL VCC = 4.5V; VI = VIH or VIL; IO = 100µA 0 0.2 0.2 V LOW level output voltage;BUS driver VCC = 3.0V; VI = VIH or VIL; IO = 8mA 0.20 0.40 0.50 voltage; BUS driver outputs VCC = 4.5V; VI = VIH or VIL; IO = 16mA 0.35 0.55 0.65 II Input leakage current VCC = 5.5V; VI = VCC or GND 1.0 1.0 µA IOZ 3-State output OFF-state current VCC = 5.5V; VI = VIH or VIL; VO = VCC or GND 5 10 µA ICC Quiescent supply current; MSI VCC = 5.5V; VI = VCC or GND; IO = 0 20.0 160 µA ΔICC Additional quiescent supply current per input VCC = 2.7V to 3.6V; VI = VCC – 0.6V 500 850 µA NOTE: 1. All typical values are measured at Tamb = 25°C.
Philips Semiconductors Product specification 74LV373Octal D-type transparent latch (3-State)
1998 Jun 10 6
GND = 0V; tr = tf ≤ 2.5ns; CL = 50pF; RL = K CONDITION LIMITS SYMBOL PARAMETER WAVEFORM CONDITION –40 to +85 °C –40 to +125 °C UNIT VCC (V) MIN TYP 1 MAX MIN MAX 1.2 – 65 – – – 2.0 – 22 37 – 48 tPHL/tPLH Propagation delay D n to Qn Figure 1, 5 2.7 – 16 28 – 35 nsD n to Q n 3.0 to 3.6 – 132 22 – 28 4.5 to 5.5 – – 16 – 20 1.2 – 80 – – – 2.0 – 27 43 – 54 tPHL/tPLH Propagation delay LE to Qn Figure 2, 5 2.7 – 20 26 – 33 nsLE to Q n 3.0 to 3.6 – 152 25 – 31 4.5 to 5.5 – 9.53 19 – 24 1.2 – 80 – – – 3-State output 2.0 – 27 46 – 58 tPZH/tPZL 3-State out ut enable time OE tQ Figure 3 2.7 – 20 28 – 35 ns OE to Q n 3.0 to 3.6 – 152 27 – 34 4.5 to 5.5 – – 23 – 29 1.2 – 75 – – – 3-State output 2.0 – 27 46 – 58 tPHZ/tPLZ 3-State out ut disable time OE tQ Figure 3 2.7 – 21 28 – 35 ns OE to Q n 3.0 to 3.6 – 162 27 – 34 4.5 to 5.5 – – 23 – 29 2.0 34 10 – 41 – tW LE pulse width HIGH Figure 2 2.7 25 8 – 30 – ns 3.0 to 3.6 20 62 – 24 – 1.2 – 25 – – – t Setup time D to LE Figure 4 2.0 17 9 – 20 – nstsu Setup time D n to LE Figure 4 2.7 13 6 – 15 – ns 3.0 to 3.6 10 52 – 12 – t Hold time Dto LE Figure 4 2.0 5 –5 – 5 – nsth Hold time D n to LE Figure 4 2.7 5 –3 – 5 – ns 3.0 to 3.6 5 –32 – 5 – NOTES: 1. All typical values are measured at Tamb = 25°C 2. Typical values are measured at VCC = 3.3V 3. Typical values are measured at VCC = 5.0V
1998 Jun 10 7
Figure 1. Data input (Dn) to output (Qn) propagation delays and the output transition times. Figure 2. Latch enable input (LE) pulse width, the latch enable and the output transition times. Figure 3. 3-State enable and disable times. to change for predictable output performance. Figure 4. Data set-up and hold times for the Dn input to the LE input. R T = Termination resistance should be equal to ZOUT of pulse generators. C L = Load capacitance includes jig and probe capacitiance. Figure 5. Load circuitry for switching times
Philips Semiconductors Product specification 74LV373Octal D-type transparent latch (3-State)
1998 Jun 10 8
DIP20: plastic dual in-line package; 20 leads (300 mil) SOT146-1
Philips Semiconductors Product specification 74LV373Octal D-type transparent latch (3-State)
1998 Jun 10 9
SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1
Philips Semiconductors Product specification 74LV373Octal D-type transparent latch (3-State)
1998 Jun 10 10
SSOP20: plastic shrink small outline package; 20 leads; body width 5.3 mm SOT339-1
Philips Semiconductors Product specification 74LV373Octal D-type transparent latch (3-State)
1998 Jun 10 11
TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm SOT360-1
Philips Semiconductors Product specification 74LV373Octal D-type transparent latch (3-State)
1998 Jun 10 12
Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 DEFINITIONS Data Sheet Identification Product Status Definition Objective Specification Preliminary Specification Product Specification Formative or in Design Preproduction Product Full Production This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product. Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 05-96 Document order number: 9397-750-04447 /C0109 /C0110 /C0114