74LV107 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 12
Technical content
/C0109 /C0110 /C0114 74LV107 Dual JK flip-flop with reset; negative-edge trigger Product specification Supersedes data of 1997 Feb 03 IC24 Data Handbook
1998 Apr 20
Philips Semiconductors Product specification 74LV107Dual JK flip-flop with reset; negative-edge trigger
21998 Apr 20 853–1904 19255
FEATURES
- Wide operating: 1.0 to 5.5 V
- Optimized for low voltage applications: 1.0 to 3.6 V
- Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V
- Typical VOLP (output ground bounce) < 0.8 V at VCC = 3.3 V, Tamb = 25°C
- Typical VOHV (output VOH undershoot) > 2 V at VCC = 3.3 V, Tamb = 25°C
- Output capability: standard
- ICC category: flip-flops
DESCRIPTION
The 74LV107 is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC/HCT107. The 74LV107 is a dual negative-edge triggered JK-type flip-flop featuring individual J, K, clock (nCP) and reset (nR) inputs; also complementary Q and Q outputs. The J and K inputs must be stable one set-up time prior to the HIGH-to-LOW clock transition for predictable operation. The reset (nR) is an asynchronous active LOW input. When LOW, it overrides the clock and data inputs, forcing the Q output LOW and the Q output HIGH. Schmitt-trigger action in the clock input makes the circuit highly tolerant to slower clock rise and fall times. QUICK REFERENCE DATA GND = 0 V; Tamb = 25°C; tr = tf ≤ 2.5 ns SYMBOL PARAMETER CONDITIONS TYPICAL UNIT tPHL /tPLH Propagation delay nCP to nQ nCP to nQ nR to nQ, nQ C L = 15 pF; VCC = 3.3 V ns fmax Maximum clock frequency 77 MHz C I Input capacitance 3.5 pF C PD Power dissipation capacitance per flip-flopVI = GND to VCC 1 30 pF NOTE: 1. CPD is used to determine the dynamic power dissipation (PD in µW) PD = CPD × VCC 2 × fi (CL × VCC 2 fo) where: fi = input frequency in MHz; CL = output load capacitance in pF; fo = output frequency in MHz; VCC = supply voltage in V; (CL × VCC 2 × fo) = sum of the outputs.
ORDERING INFORMATION
PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA PKG. DWG. # 14-Pin Plastic DIL –40°C to +125°C 74LV107 N 74LV107 N SOT27-1 14-Pin Plastic SO –40°C to +125°C 74LV107 D 74LV107 D SOT108-1 14-Pin Plastic SSOP Type II –40°C to +125°C 74LV107 DB 74LV107 DB SOT337-1 14-Pin Plastic TSSOP Type I –40°C to +125°C 74LV107 PW 74LV107PW DH SOT402-1 PIN CONFIGURATION SV00497 GND 1CP 2CP V CC PIN DESCRIPTION PIN NUMBER SYMBOL FUNCTION 1, 8, 4, 111J, 2J, 1K, 2KSynchronous inputs; flip-flops 1 and 2 2, 6 1Q , 2Q Complement flip-flop outputs 3, 5 1Q, 2Q True flip-flop outputs
7 GND Ground (0 V)
12, 9 1CP , 2CP Clock input (HIGH-to-LOW, edge-triggered) 13, 10 1R , 2R Asynchronous reset inputs (active LOW)
14 VCC Positive supply voltage
Philips Semiconductors Product specification 74LV107Dual JK flip-flop with reset; negative-edge trigger
1998 Apr 20 3
J 11 2K 41 K K FF 12 1CP 2CP CP Q 21Q 62Q Q 31Q 52Q 1013 R 1R 2R LOGIC SYMBOL (IEEE/IEC) SV00499 FUNCTIONAL DIAGRAM SV00500 J J K K FF1 FF2 1CP 2CP CP CP Q Q Q Q R R LOGIC DIAGRAM SV00501 C C C C C C C C CP R J K Q Q C C
Philips Semiconductors Product specification 74LV107Dual JK flip-flop with reset; negative-edge trigger
1998 Apr 20 4
Asynchronous reset L X X X L H Toggle H ↓ h h q q Load “0” (reset) H ↓ l h L H Load “1” (set) H ↓ h l H L Hold “no change” H ↓ l l q q NOTES: H = HIGH voltage level h = HIGH voltage level one set-up time prior to the HIGH-to-LOW CP transition L = LOW voltage level I = LOW voltage level one set-up time prior to the HIGH-to-LOW CP transition q = lower case letters indicate the state of the referenced output one set-up time prior to the HIGH-to-LOW CP transition. X = don’t care ↓ = HIGH-to-LOW CP transition ABSOLUTE MAXIMUM RATINGS 1, 2 In accordance with the Absolute Maximum Rating System (IEC 134). Voltages are referenced to GND (ground = 0V). SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +7.0 V /C0034IIK DC input diode current VI < –0.5 or VI > VCC + 0.5V 20 mA /C0034IOK DC output diode current VO < –0.5 or VO > VCC + 0.5V 50 mA /C0034IO DC output source or sink current – standard outputs –0.5V < VO < VCC + 0.5V 25 mA /C0034IGND , /C0034ICC DC V CC or GND current for types with – standard outputs 50 mA Tstg Storage temperature range –65 to +150 °C PTOT Power dissipation per package – plastic DIL – plastic mini-pack (SO) – plastic shrink mini-pack (SSOP and TSSOP) for temperature range: –40 to +125°C above +70°C derate linearly with 12 mW/K above +70°C derate linearly with 8 mW/K above +60°C derate linearly with 5.5 mW/K 750 500 400 mW NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER CONDITIONS MIN TYP. MAX UNIT VCC DC supply voltage See Note 1 1.0 3.3 5.5 V VI Input voltage 0 – VCC V VO Output voltage 0 – VCC V Tamb Operating ambient temperature range in free airSee DC and AC characteristics –40 –40 +85 +125 °C tr, tf Input rise and fall times except for Schmitt-trigger inputs VCC = 1.0V to 2.0V VCC = 2.0V to 2.7V VCC = 2.7V to 3.6V VCC = 3.6V to 5.5V 500 200 100 ns/V NOTE:
Philips Semiconductors Product specification 74LV107Dual JK flip-flop with reset; negative-edge trigger
1998 Apr 20 5
DC ELECTRICAL CHARACTERISTICS Over recommended operating conditions. Voltages are referenced to GND (ground = 0 V). LIMITS SYMBOL PARAMETER TEST CONDITIONS -40°C to +85°C -40°C to +125°C UNIT MIN TYP 1 MAX MIN MAX VCC = 1.2 V 0.9 0.9 VIH VCC = 4.5 to 5.5 V 0.7/C0060VCC 0.7/C0060VCC VCC = 1.2 V 0.3 0.3 VIL VCC = 4.5 to 5.5 0.3/C0060VCC 0.3/C0060VCC VCC = 1.2 V; VI = VIH or VIL; –IO = 100µA 1.2 HIGH level output VCC = 2.0 V; VI = VIH or VIL; –IO = 100µA 1.8 2.0 1.8 VOH HIGH level output voltage;all outputs VCC = 2.7 V; VI = VIH or VIL; –IO = 100µA 2.5 2.7 2.5 Vvoltage all out uts VCC = 3.0 V; VI = VIH or VIL; –IO = 100µA 2.8 3.0 2.8 VCC = 4.5 V; VI = VIH or VIL; –IO = 100µA 4.3 4.5 4.3 VOH HIGH level output voltage; VCC = 3.0 V; VI = VIH or VIL; –IO = 6mA 2.40 2.82 2.20 VVOH g STANDARD outputs VCC = 4.5 V; VI = VIH or VIL; –IO = 12mA 3.60 4.20 3.50 V VCC = 1.2 V; VI = VIH or VIL; IO = 100µA 0 LOW level output VCC = 2.0 V; VI = VIH or VIL; IO = 100µA 0 0.2 0.2 VOL LOW level output voltage;all outputs VCC = 2.7 V; VI = VIH or VIL; IO = 100µA 0 0.2 0.2 Vvoltage all out uts VCC = 3.0 V; VI = VIH or VIL; IO = 100µA 0 0.2 0.2 VCC = 4.5 V; VI = VIH or VIL; IO = 100µA 0 0.2 0.2 VOL LOW level output voltage; VCC = 3.0 V; VI = VIH or VIL; IO = 6mA 0.25 0.40 0.50 VVOL g STANDARD outputs VCC = 4.5 V; VI = VIH or VIL; IO = 12mA 0.35 0.55 0.65 V II Input leakage current VCC = 5.5 V; VI = VCC or GND 1.0 1.0 µA ICC Quiescent supply current; flip-flopsVCC = 5.5V; VI = VCC or GND; IO = 0 20.0 80 µA ΔICC Additional quiescent supply current per input VCC = 2.7 V to 3.6 V; VI = VCC – 0.6 V 500 850 µA NOTE: 1. All typical values are measured at Tamb = 25°C. AC CHARACTERISTICS GND = 0V; tr = tf ≤ 2.5ns; CL = 50pF; RL = 1KΩ CONDITION LIMITS SYMBOL PARAMETER WAVEFORM CONDITION –40 to +85 °C –40 to +125 °C UNIT VCC (V) MIN TYP 1 MAX MIN MAX 1.2 95 Propagation delay 2.0 32 44 56 tPHL /tPLH Propagation delay nCP to nQ, nQ Figures 1, 2 2.7 24 33 41 nsnCP to nQ , nQ 3.0 to 3.6 182 26 33 4.5 to 5.5 22 28
Philips Semiconductors Product specification 74LV107Dual JK flip-flop with reset; negative-edge trigger
1998 Apr 20 6
AC CHARACTERISTICS (Continued) GND = 0V; tr = tf ≤ 2.5ns; CL = 50pF; RL = 1KΩ SYMBOL PARAMETER WAVEFORM CONDITION –40 to +85 °C –40 to +125 °C UNITSYMBOL PARAMETER WAVEFORM VCC (V) MIN TYP 1 MAX MIN MAX UNIT 1.2 95 Propagation delay 2.0 32 44 56 tPHL /tPLH Propagation delay nR to nQ, nQ Figures 1, 2 2.7 24 33 41 nsnR to nQ , nQ 3.0 to 3.6 182 26 33 4.5 to 5.5 22 28 2.0 34 14 41 tW Clock pulse width Figure 2 2.7 25 10 30 nstW HIGH or LOW Figure 2 3.0 to 3.6 20 82 24 ns 4.5 to 5.5 15 18 2.0 34 14 41 tW Reset pulse width Figure 2 2.7 25 10 30 nstW LOW Figure 2 3.0 to 3.6 20 82 24 ns 4.5 to 5.5 15 1.2 35 Removal time 2.0 24 12 29 trem R emova l time nR to nCP Figure 2 2.7 18 9 21 nsnR to nCP 3.0 to 3.6 14 72 17 4.5 to 5.5 11 14 1.2 40 Set up time 2.0 26 14 31 tsu Set-up time nJ, nK to CP Figure 1 2.7 19 10 23 nsnJ, nK to CP 3.0 to 3.6 15 82 18 4.5 to 5.5 12 15 1.2 -10 Hold time 2.0 5 –3 5 th H old time nJ, nK to CP Figure 1 2.7 5 –2 5 nsnJ, nK to CP 3.0 to 3.6 5 –22 5 4.5 to 5.5 5 5 2.0 14 40 12 f Maximum clock Figure 1 2.7 19 58 16 MHzfmax pulse frequency Figure 1 3.0 to 3.6 24 702 20 MHz 4.5 to 5.5 30 24 NOTES: 1. Unless otherwise stated, all typical values are measured at Tamb = 25°C 2. Typical values are measured at VCC = 3.3 V.
1998 Apr 20 7
predictable output performance. Figure 1. Clock (nCP) to output (nQ, nQ) propagation delays, and the maximum clock pulse frequency. Figure 2. Reset (nR) input to output (nQ, nQ) propagation delays, the reset pulse width and the nR to nCP removal time. R T = Termination resistance should be equal to ZOUT of pulse generators. Figure 3. Load circuitry for switching times.
Philips Semiconductors Product specification 74LV107Dual JK flip-flop with reset; negative-edge trigger
1998 Apr 20 8
DIP14: plastic dual in-line package; 14 leads (300 mil) SOT27-1
Philips Semiconductors Product specification 74LV107Dual JK flip-flop with reset; negative-edge trigger
1998 Apr 20 9
SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1
Philips Semiconductors Product specification 74LV107Dual JK flip-flop with reset; negative-edge trigger
1998 Apr 20 10
SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm SOT337-1
Philips Semiconductors Product specification 74LV107Dual JK flip-flop with reset; negative-edge trigger
1998 Apr 20 11
TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1
Philips Semiconductors Product specification 74LV107Dual JK flip-flop with reset; negative-edge trigger
1998 Apr 20 12
Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 DEFINITIONS Data Sheet Identification Product Status Definition Objective Specification Preliminary Specification Product Specification Formative or in Design Preproduction Product Full Production This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product. Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 05-96 Document order number: 9397-750-04416 /C0109 /C0110 /C0114