74LCX760 FAIRCHILD

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 10

Technical content

Features

I Open drain version of the LCX244 I 5V tolerant inputs and outputs I 2.3V–3.6V VCC specifications provided I 8.0 ns tPD max (VCC = 3.3V), 10 µA ICC max I Power down high impedance inputs and outputs I Supports live insertion/withdrawal (Note 1) I 24 mA output drive (VCC = 3.0V) I Implements patented noise/EMI reduction circuitry I Latch-up conforms to JEDEC JED78 I ESD performance: Human body model > 2000V Machine model > 200V Note 1: To ensure the high-impedance state during power up or down, OE should be tied to VCC through a pull-up resistor: the minimum value or the resistor is determined by the current-sourcing capability of the driver. Ordering Code: Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol IEEE/IEC Connection Diagram Order Number Package Number Package Description 74LCX760WM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 ” Wide 74LCX760SJ M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 4.4mm Wide 74LCX760MSA MSA20 20-Lead Shrink Small Outline Package (SSOP), EIAJ TYPE II, 5.3mm Wide 74LCX760MTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

www.fairchildsemi.com 2 74LCX760 Pin Descriptions Truth Tables H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Z = High Impedance Pin Names Description OE 1, OE2 3-STATE Output Enable Inputs I0–I7 Inputs O 0–O 7 Outputs Inputs Outputs OE 1 In (Pins 12, 14, 16, 18) LL L LH H HX Z Inputs Outputs OE

2 In (Pins 3, 5, 7, 9)

3 www.fairchildsemi.com 74LCX760 Absolute Maximum Ratings(Note 2) Recommended Operating Conditions (Note 4) Note 2: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recom- mended Operating Conditions” table will define the conditions for actual device operation. Note 3: IO Absolute Maximum Rating must be observed. Note 4: Unused inputs or I/Os must be held HIGH or LOW. They may not float. Note 5: Outputs disabled or 3-STATE only. Symbol Parameter Value Conditions Units VCC Supply Voltage −0.5 to +7.0 V VI DC Input Voltage −0.5 to +7.0 V VO DC Output Voltage −0.5 to +7.0 Output in HIGH or LOW State (Note 3) V IIK DC Input Diode Current −50 V I < GND mA IOK DC Output Diode Current −50 V O < GND mA+50 V O > VCC IO DC Output Sink Current 50 mA ICC DC Supply Current per Supply Pin ±100 mA IGND DC Ground Current per Ground Pin ±100 mA TSTG Storage Temperature −65 to +150 °C Symbol Parameter Min Max Units VCC Supply Voltage Operating 2.0 3.6 VData Retention 1.5 3.6 VI Input Voltage 0 5.5 V VO Output Voltage 0 5.5 V IOL Output Current V CC = 3.0V − 3.6V 24 mAVCC = 2.7V − 3.0V 12 VCC = 2.3V − 2.7V 8 TA Free-Air Operating Temperature −40 85 °C ∆t/∆V Input Edge Rate, V IN = 0.8V–2.0V, VCC = 3.0V 0 10 ns/V Symbol Parameter Conditions VCC TA = −40°C to +85°C Units (V) Min Max VIH HIGH Level Input Voltage 2.3 − 2.7 1.7 V 2.7 − 3.6 2.0 VIL LOW Level Input Voltage 2.3 − 2.7 0.7 V 2.7 − 3.6 0.8 VOL LOW Level Output Voltage I OL = 100 µA2 . 3 − 3.6 0.2 V IOL = 8 mA 2.3 0.6 IOL = 12 mA 2.7 0.4 IOL = 16 mA 3.0 0.4 IOL = 24 mA 3.0 0.55 II Input Leakage Current 0 ≤ VI ≤ 5.5V 2.3 − 3.6 ±5.0 µA IOZ 3-STATE Output Leakage 0 ≤ VO ≤ 5.5V 2.3 − 3.6 ±5.0 µA VI = VIH or VIL IOFF Power-Off Leakage Current V I or VO = 5.5V 0 10 µA ICC Quiescent Supply Current V I = VCC or GND 2.3 − 3.6 10 µA ∆ICC Increase in ICC per Input V IH = VCC −0.6V 2.3 − 3.6 500 µA IOHZ Off State Current V O = 5.5 2 - 3.6 10 µA

www.fairchildsemi.com 4 74LCX760 Note 6: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL ) or LOW-to-HIGH (tOSLH ). Dynamic Switching Characteristics Capacitance Symbol Parameter TA = −40°C to +85°C, RL = 500Ω Units C L= 50 pF C L = 50 pF C L = 30 pF Min Max Min Max Min Max ns tPZL Output Enable Time OE n to Out tPLZ Output Disable Time OE n to Out tOSHL Output to Output Skew 1.0 ns tOSLH (Note 6) 1.0 Symbol Parameter Conditions VCC TA = 25°C Units (V) Typical VOLP Quiet Output Dynamic Peak VOL C L = 50 pF, VIH = 3.3V, VIL = 0V 3.3 0.8 V C L = 30 pF, VIH = 2.5V, VIL = 0V 2.5 0.6 VOLV Quiet Output Dynamic Valley VOL C L = 50 pF, VIH = 3.3V, VIL = 0V 3.3 −0.8 V C L = 30 pF, VIH = 2.5V, VIL = 0V 2.5 −0.6 Symbol Parameter Conditions Typical Units C IN Input Capacitance V CC = Open, VI = 0V or VCC 7p F C OUT Output Capacitance V CC = 3.3V, VI = 0V or VCC 8p F C PD Power Dissipation Capacitance V CC = 3.3V, VI = 0V or VCC , f = 10 MHz 10 pF

www.fairchildsemi.com 6 74LCX760 Schematic Diagram Generic for LCX Family (output pull-up circuitry is not applicable to open drain versions) FIGURE 3.

7 www.fairchildsemi.com 74LCX760 Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300” Wide Package Number M20B

www.fairchildsemi.com 8 74LCX760 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 4.4mm Wide Package Number M20D

9 www.fairchildsemi.com 74LCX760 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Shrink Small Outline Package (SSOP), EIAJ TYPE II, 5.3mm Wide

www.fairchildsemi.com 10 74LCX760 Low Voltage Buffer/Line Driver with 5V Tolerant Inputs and Open Drain Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD ’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com