74LCX74MX FAIRCHILD

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 14

Technical content

Features

2.3V–3.6V V CC specifications provided 7.0ns t PD max. (V CC 3.3V), 10µA I CC max. Power down high impedance inputs and outputs ±24mA output drive (V CC 3.0V) Latch-up performance exceeds JEDEC 78 conditions ESD performance: – Human body model 2000V – Machine model 200V Leadless Pb-Free DQFN package General Description The LCX74 is a dual D-type flip-flop with Asynchronous Clear and Set inputs and complementary (Q, Q) outputs. Information at the input is transferred to the outputs on the positive edge of the clock pulse. After the Clock Pulse input threshold voltage has been passed, the Data input is locked out and information present will not be transferred to the outputs until the next rising edge of the Clock Pulse input. Asynchronous Inputs: LOW input to S D (Set) sets Q to HIGH level LOW input to C D (Clear) sets Q to LOW level Clear and Set are independent of clock Simultaneous LOW on C D and S D makes both Q and Q HIGH

Ordering Information

Note: 1. DQFN package available in Tape and Reel only. Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. Order Number Package Number Package Description 74LCX74M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74LCX74SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74LCX74BQX (1) MLP14A 14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.0mm 74LCX74MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Implements proprietary noise/EMI reduction circuitry

©1995 Fairchild Semiconductor Corporation www.fairchildsemi.com 74LCX74 Rev. 1.7.0 2 74LCX74 — Low Voltage Dual D-Type Positive Edge-Triggered Flip-Flop with 5V Tolerant Inputs Connection Diagrams Pin Assignments for SOIC, SOP, and TSSOP Pad Assignment for DQFN (Top View) Pin Description Logic Symbols IEEE/IEC Truth Table (Each Half) H HIGH Voltage Level L LOW Voltage Level X Immaterial LOW-to-HIGH Clock Transition Q Previous Q(Q) before LOW-to-HIGH Transition of Clock Pin Names Description D , D Data Inputs CP , CP Clock Pulse Inputs C , C Direct Clear Inputs S , S Direct Set Inputs Q , Q , Q , Q Outputs Inputs Outputs S D C D CP D Q Q LHX X HL HLX X LH LLX X H H HH H HL HH LLH HHL X Q Q

©1995 Fairchild Semiconductor Corporation www.fairchildsemi.com 74LCX74 Rev. 1.7.0 3 74LCX74 — Low Voltage Dual D-Type Positive Edge-Triggered Flip-Flop with 5V Tolerant Inputs Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Note: 2. I O Absolute Maximum Rating must be observed. Recommended Operating Conditions (3) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Note: 3. Unused inputs must be held HIGH or LOW. They may not float. Symbol Parameter Rating V CC Supply Voltage –0.5V to +7.0V V I DC Input Voltage –0.5V to +7.0V V O DC Output Voltage, Output in HIGH or LOW State (2) –0.5V to V CC + 0.5V I IK DC Input Diode Current, V I GND –50mA I OK DC Output Diode Current V O GND –50mA V O V CC +50mA I O DC Output Source/Sink Current ±50mA I CC DC Supply Current per Supply Pin ±100mA I GND DC Ground Current per Ground Pin ±100mA T STG Storage Temperature –65°C to +150°C Symbol Parameter Min. Max. Units V CC Supply Voltage Operating 2.0 3.6 V Data Retention 1.5 3.6 V I Input Voltage 0 5.5 V V O Output Voltage, HIGH or LOW State 0 V CC V I OH I OL Output Current V CC 3.0V–3.6V ±24 mA V CC 2.7V–3.0V ±12 V CC 2.3V–2.7V ±8 T A Free-Air Operating Temperature –40 85 °C t V Input Edge Rate, V IN 0.8V–2.0V, V CC 3.0V 0 10 ns V

©1995 Fairchild Semiconductor Corporation www.fairchildsemi.com 74LCX74 Rev. 1.7.0 4 74LCX74 — Low Voltage Dual D-Type Positive Edge-Triggered Flip-Flop with 5V Tolerant Inputs Note: 4. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (t OSHL ) or LOW-to-HIGH (t OSLH Symbol Parameter V CC (V) Conditions T A –40°C to +85°C UnitsMin. Max. V IH HIGH Level Input Voltage 2.3–2.7 1.7 V 2.7–3.6 2.0 V IL LOW Level Input Voltage 2.3–2.7 0.7 V 2.7–3.6 0.8 V OH HIGH Level Output Voltage 2.3–3.6 I OH –100µA V CC – 0.2 V 2.3 I OH –8mA 1.8 2.7 I OH –12mA 2.2 3.0 I OH –18mA 2.4 I OH = –24mA 2.2 VOL LOW Level Output Voltage 2.3–3.6 I OL = 100µA 0.2 V 2.3 I OL = 8mA 0.6 2.7 I OL = 12mA 0.4 3.0 I OL = 16mA 0.4 IOL = 24mA 0.55 II Input Leakage Current 2.3–3.6 0 ≤ VI ≤ 5.5V ±5.0 µA IOFF Power-Off Leakage Current 0 V I or VO = 5.5V 10 µA ICC Quiescent Supply Current 2.3–3.6 V I = VCC or GND 10 µA 3.6V ≤ VI ≤ 5.5V ±10 ∆ICC Increase in ICC per Input 2.3–3.6 V IH = VCC – 0.6V 500 µA Symbol Parameter TA = –40°C to +85°C, R L = 500Ω Units VCC = 3.3V ± 0.3V, CL = 50pF VCC = 2.7V, CL = 50pF VCC = 2.5V ± 0.2V, CL = 30pF fMAX Maximum Clock Frequency 150 150 150 MHz tPHL, tPLH Propagation Delay, CPn to Qn or Qn tPHL, tPLH Propagation Delay, CDn or SDn to Qn or Qn tS Setup Time 2.5 2.5 4.0 ns tH Hold Time 1.5 1.5 2.0 ns tW Pulse Width CP 3.3 3.3 4.0 ns tW Pulse Width and CD, SD 3.3 3.6 4.0 ns tREC Recovery Time 2.5 3.0 4.5 ns tOSHL, tOSLH Output to Output Skew(4) 1.0 ns

©1995 Fairchild Semiconductor Corporation www.fairchildsemi.com 74LCX74 Rev. 1.7.0 5 74LCX74 — Low Voltage Dual D-Type Positive Edge-Triggered Flip-Flop with 5V Tolerant Inputs Dynamic Switching Characteristics Capacitance Symbol Parameter V CC (V) Conditions TA = 25°C UnitTypical VOLP Quiet Output Dynamic Peak VOL 3.3 C L = 50pF , VIH = 3.3V, VIL = 0V 0.8 V 2.5 C L = 30pF , VIH = 2.5V, VIL = 0V 0.6 VOLV Quiet Output Dynamic Valley VOL 3.3 C L = 50pF , VIH = 3.3V, VIL = 0V –0.8 V 2.5 C L = 30pF , VIH = 2.5V, VIL = 0V –0.6 Symbol Parameter Conditions Typical Units CIN Input Capacitance V CC = Open, VI = 0V or VCC 7p F COUT Output Capacitance V CC = 3.3V, VI = 0V or VCC 8p F CPD Power Dissipation Capacitance V CC = 3.3V, VI = 0V or VCC, f = 10MHz 25 pF

©1995 Fairchild Semiconductor Corporation www.fairchildsemi.com 74LCX74 Rev. 1.7.0 7 74LCX74 — Low Voltage Dual D-Type Positive Edge-Triggered Flip-Flop with 5V Tolerant Inputs Schematic Diagram (Generic for LCX Family)

©1995 Fairchild Semiconductor Corporation www.fairchildsemi.com 74LCX74 Rev. 1.7.0 8 74LCX74 — Low Voltage Dual D-Type Positive Edge-Triggered Flip-Flop with 5V Tolerant Inputs Tape and Reel Specification Tape Format for DQFN Tape Dimensions inches (millimeters) Reel Dimensions inches (millimeters) Package Designator Tape Section Number of Cavities Cavity Status Cover Tape Status BQX Leader (Start End) 125 (Typ.) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (Typ.) Empty Sealed Tape Size A B C D N W1 W2

Figure 3. 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow specifically the warranty therein, which covers Fairchild products. B) ALL DIMENSIONS ARE IN MILLIMETERS.

1.75 MAX

Figure 4. 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide specifically the warranty therein, which covers Fairchild products.

Figure 5. 14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.0mm specifically the warranty therein, which covers Fairchild products.

Figure 6. 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide specifically the warranty therein, which covers Fairchild products.

0.43 TYP

©1995 Fairchild Semiconductor Corporation www.fairchildsemi.com 74LCX74 Rev. 1.7.0 13 TRADEMARKS Thef ollowing includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK EZSWITCH™ * Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FlashWriter®* FPS™ FRFET Global Power Resource SM Green FPS™ Green FPS™e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC OPTOPLANAR® PDP-SPM™ Power220® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™ -6 SuperSOT™ -8 SupreMOS™ SyncFET™ The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC Ultra FRFET™ UniFET™ VCX™ *E Z S W ITCH™ and FlashWriter ® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHERDOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I33 74LCX74 — Low Voltage Dual D-Type Positive Edge-Triggered Flip-Flop with 5V Tolerant Inputs

Click to View Pricing, Inventory, Delivery & Lifecycle Information: Fairchild Semiconductor: 74LCX74MTC 74LCX74SJX 74LCX74MTCX 74LCX74MX 74LCX74SJ 74LCX74M 74LCX74BQX 74LCX74MTCX_NL 74LCX74SJX_NL