74LCX157 FAIRCHILD

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 9

Technical content

Features

I 2.3V–3.6V VCC specifications provided I 5.8 ns tPD max (VCC = 3.3V), 10 µA ICC max I Power down high impedance inputs and outputs I ±24 mA output drive (VCC = 3.0V) I Implements patented noise/EMI reduction circuitry I Latch-up performance exceeds 500 mA I ESD performance: Human body model > 2000V Machine model > 200V Ordering Code: Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbols IEEE/IEC Connection Diagram Pin Descriptions Order Number Package Number Package Description 74LCX157M M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow 74LCX157SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74LCX157MTC MTC16 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Pin Names Description I0a–I0d Source 0 Data Inputs I1a–I1d Source 1 Data Inputs E Enable Input S Select Input Za–Zd Outputs

www.fairchildsemi.com 2 74LCX157 Functional Description The LCX157 is a quad 2-input multiplexer. It selects four bits of data from two sources under the control of a com- mon Select input (S). The Enable input (E ) is active-LOW. When E is HIGH, all of the outputs (Z) are forced LOW regardless of all other inputs. The LCX157 is the logic implementation of a 4-pole, 2-position switch where the position of the switch is determined by the logic levels sup- plied to the Select input. The logic equations for the outputs are shown below: Z a = E  (I1a  S + I0a  S) Zb = E  (I1b  S + I0b  S) Zc = E  (I1c  S + I0c  S) Zd = E  (I1d  S + I0d  S) A common use of the LCX157 is the moving of data from two groups of registers to four common output busses. The particular register from which the data comes is determined by the state of the Select input. A less obvious use is as a function generator. The LCX157 can generate any four of the sixteen different functions of two variables with one variable common. This is useful for implementing gating functions. Truth Table H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Logic Diagram Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. Inputs Outputs E SI 0 I1 Z HX X X L LH X L L LH X H H LL L X L LL H X H

3 www.fairchildsemi.com 74LCX157 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 3) Note 1: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recom- mended Operating Conditions” table will define the conditions for actual device operation. Note 2: IO Absolute Maximum Rating must be observed. Note 3: Unused inputs must be held HIGH or LOW. They may not float. Symbol Parameter Value Conditions Units VCC Supply Voltage −0.5 to +7.0 V VI DC Input Voltage −0.5 to +7.0 V VO DC Output Voltage −0.5 to VCC + 0.5 Output in HIGH or LOW State (Note 2) V IIK DC Input Diode Current −50 V I < GND mA IOK DC Output Diode Current −50 V O < GND mA+50 V O > VCC IO DC Output Source/Sink Current ±50 mA ICC DC Supply Current per Supply Pin ±100 mA IGND DC Ground Current per Ground Pin ±100 mA TSTG Storage Temperature −65 to +150 °C Symbol Parameter Min Max Units VCC Supply Voltage Operating 2.0 3.6 VData Retention 1.5 3.6 VI Input Voltage 05 . 5V VO Output Voltage HIGH or LOW State 0 V CC V IOH /IOL Output Current V CC = 3.0V − 3.6V ±24 mAVCC = 2.7V − 3.0V ±12 VCC = 2.3V − 2.7V ±8 TA Free-Air Operating Temperature −40 85 °C ∆t/∆V Input Edge Rate, V IN = 0.8V − 2.0V, VCC = 3.0V 0 10 ns/V Symbol Parameter Conditions VCC TA = −40°C to +85°C Units (V) Min Max VIH HIGH Level Input Voltage 2.3 − 2.7 1.7 V 2.7 − 3.6 2.0 VIL LOW Level Input Voltage 2.3 − 2.7 0.7 V 2.7 − 3.6 0.8 VOH HIGH Level Output Voltage I OH = −100 µA2 . 3 − 3.6 V CC − 0.2 V IOH = −8 mA 2.3 1.8 IOH = −12 mA 2.7 2.2 IOH = −18 mA 3.0 2.4 IOH = −24 mA 3.0 2.2 VOL LOW Level Output Voltage I OL = 100 µA2 . 3 − 3.6 0.2 V IOH = 8 mA 2.3 0.6 IOL = 12 mA 2.7 0.4 IOL = 16 mA 3.0 0.4 IOL = 24 mA 3.0 0.55 II Input Leakage Current 0 ≤ VI ≤ 5.5V 2.3 − 3.6 ±5.0 µA IOFF Power-Off Leakage Current V I or VO = 5.5V 0 10 µA ICC Quiescent Supply Current V I = VCC or GND 2.3 − 3.6 10 µA ∆ICC Increase in ICC per Input V IH = VCC −0.6V 2.3 − 3.6 500 µA

www.fairchildsemi.com 4 74LCX157 Note 4: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL ) or LOW-to-HIGH (tOSLH ). Parameter guaranteed by design. Dynamic Switching Characteristics Capacitance Symbol Parameter TA = −40°C to +85°C, RL = 500Ω Units C L = 50 pF C L = 50 pF C L = 30 pF Min Max Min Max Min Max ns ns ns tOSHL Output to Output Skew 1.0 ns tOSLH (Note 4) 1.0 Symbol Parameter Conditions VCC TA = 25°C Units (V) Typical VOLP Quiet Output Dynamic Peak VOL C L = 50 pF, VIH = 3.3V, VIL = 0V 3.3 0.8 V CL= 30 pF, VIH = 2.5V, VIL = 0V 2.5 0.6 VOLV Quiet Output Dynamic Valley VOL C L = 50 pF, VIH = 3.3V, VIL = 0V 3.3 −0.8 V CL= 30 pF, VIH = 2.5V, VIL = 0V 2.5 -0.6 Symbol Parameter Conditions Typical Units C IN Input Capacitance V CC = Open, VI = 0V or VCC 7p F C OUT Output Capacitance V CC = 3.3V, VI = 0V or VCC 8p F C PD Power Dissipation Capacitance V CC = 3.3V, VI = 0V or VCC , f = 10 MHz 25 pF

www.fairchildsemi.com 6 74LCX157 Schematic Diagram Generic for LCX Family

7 www.fairchildsemi.com 74LCX157 Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Number M16A

www.fairchildsemi.com 8 74LCX157 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M16D

9 www.fairchildsemi.com 74LCX157 Low Voltage Quad 2-Input Multiplexer with 5V Tolerant Inputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD ’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com