74HCT3G07GD

74HC3G07 NXP

Document overview

• PDF pages: 13

Technical content

Page 1

1. General description

The 74HC3G07 and 74HCT3G07 are high-speed Si-gate CMOS devices. They provide three buffers with open-drain outputs.

The outputs of the 74HC3G07 and 74HCT3G07 devices are open drains and can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions. For digital operation this device must have a pull-up resistor to establish a logic HIGH-level.

The HC device has CMOS input switching levels and supply voltage range 2 V to 6 V.

The HCT device has TTL input switching levels and supply voltage range 4.5 V to 5.5 V.

2. Features

I Wide supply voltage range from 2.0 V to 6.0 V I High noise immunity I Low power dissipation I Multiple package options I ESD protection: N HBM JESD22-A114E exceeds 2000 V N MM JESD22-A115-A exceeds 200 V I Specified from −40 °C to +85 °C and −40 °C to +125 °C

3. Ordering information

Table 1. Ordering information

−40 °C to +125 °C TSSOP8 plastic thin shrink small outline package; 8 leads;

74HC3G07DP

SOT505-2

body width 3 mm; lead length 0.5 mm

74HCT3G07DP

−40 °C to +125 °C VSSOP8 plastic very thin shrink small outline package; 8 leads;

74HC3G07DC

SOT765-1

body width 2.3 mm

74HCT3G07DC

−40 °C to +125 °C XSON8U plastic extremely thin small outline package; no leads;

74HC3G07GD

SOT996-2

8 terminals; UTLP based; body 3 × 2 × 0.5 mm

74HCT3G07GD

Page 2

4. Marking

Table 2. Marking code Type number

Marking code

74HC3G07DP

H07

74HCT3G07DP

T07

74HC3G07DC

H07

74HCT3G07DC

T07

74HC3G07GD

H07

74HCT3G07GD

T07

5. Functional diagram

6. Pinning information

6.1 Pinning

2 of 13

Page 3

6.2 Pin description

Table 3. Pin description Symbol

Pin

Description

1A, 2A, 3A

1, 3, 6

data input

GND

4

ground (0 V)

1Y, 2Y, 3Y

7, 5, 2

data output

8

supply voltage

VCC

7. Functional description

Table 4. Function table[1] Input nA

Output nY

L

L

H

Z

[1] H = HIGH voltage level; L = LOW voltage level; Z = high-impedance OFF-state.

8. Limiting values

Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter

Conditions

Min

Max

Unit

supply voltage

−0.5

7.0

V

VCC

[1] -

input clamping current

VI < −0.5 V or VI > VCC + 0.5 V

±20

mA

IIK

[1] −20

output clamping current

VO < −0.5 V

-

mA

IOK

[1] −0.5

output voltage

active mode

VCC + 0.5 V

VO

[1] −0.5

7.0

V

high-impedance mode

[1] −25

output current

VO = −0.5 V to 7.0 V

-

mA

IO

[1] -

supply current

50

mA

ICC

[1] −50

ground current

-

mA

IGND storage temperature

−65

+150

°C

Tstg

[2] -

dynamic power dissipation

Tamb = −40 °C to +125 °C

300

mW

PD

[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For TSSOP8 package: above 55 °C the value of Ptot derates linearly with 2.5 mW/K. For VSSOP8 package: above 110 °C the value of Ptot derates linearly with 8 mW/K. For XSON8U package: above 118 °C the value of Ptot derates linearly with 7.8 mW/K.

3 of 13

Page 4

9. Recommended operating conditions

Table 6. Recommended operating conditions Voltages are referenced to GND (ground = 0 V).

supply voltage

2.0 5.0 6.0 4.5 5.0 5.5 V

VCC input voltage

0 - 6.0 0 - 5.5 V

VI output voltage

0 - VCC 0 - VCC V

VO ambient temperature

−40 +25 +125 −40 +25 +125 °C

Tamb

VCC = 2.0 V

• - 625 - - - ns/V

∆t/∆V input transition rise and fall rate

VCC = 4.5 V

• 1.67 139 - 1.67 139 ns/V

VCC = 6.0 V

• - 83 - - - ns/V

10. Static characteristics

Table 7. Static characteristics Voltages are referenced to GND (ground = 0 V). All typical values are measured at Tamb = 25 °C.

74HC3G07 HIGH-level input

VCC = 2.0 V

1.5 1.2 - 1.5

• V

VIH voltage

VCC = 4.5 V

3.15 2.4 - 3.15

• V

VCC = 6.0 V

4.2 3.2 - 4.2

• V

LOW-level input

VCC = 2.0 V

• 0.8 0.5 - 0.5 V

VIL voltage

VCC = 4.5 V

• 2.1 1.35 - 1.35 V

VCC = 6.0 V

• 2.8 1.8 - 1.8 V

LOW-level output

VI = VIH or VIL

VOL voltage

IO = 20 µA; VCC = 2.0 V

• 0 0.1 - 0.1 V

IO = 20 µA; VCC = 4.5 V

• 0 0.1 - 0.1 V

IO = 20 µA; VCC = 6.0 V

• 0 0.1 - 0.1 V

IO = 4.0 mA; VCC = 4.5 V

• 0.15 0.33 - 0.4 V

IO = 5.2 mA; VCC = 6.0 V

• 0.16 0.33 - 0.4 V

input leakage

VI = VCC or GND; VCC = 6.0 V

• - ±0.1 - ±1.0 µA

II current output leakage

VI = VIH; VO = VCC or GND

• - ±5.0 - ±10 µA

ILO current supply current

per input pin; VCC = 6.0 V;

ICC

• - 10 - 20 µA

VI = VCC or GND; IO = 0 A;

input capacitance

• 1.5 - -
• pF

CI

4 of 13

Page 5

Table 7. Static characteristics …continued Voltages are referenced to GND (ground = 0 V). All typical values are measured at Tamb = 25 °C.

74HCT3G07

HIGH-level input

VCC = 4.5 V to 5.5 V

2.0 1.6 - 2.0

• V

VIH voltage LOW-level input

VCC = 4.5 V to 5.5 V

• 1.2 0.8 - 0.8 V

VIL voltage LOW-level output

VI = VIH or VIL

VOL voltage

IO = 20 µA; VCC = 4.5 V

• 0 0.1 - 0.1 V

IO = 4.0 mA; VCC = 4.5 V

• 0.15 0.33 - 0.4 V

input leakage

VI = VCC or GND; VCC = 5.5 V

• - ±1.0 - ±1.0 µA

II current output leakage

VI = VIH; VO = VCC or GND

• - ±5.0 - ±10 µA

ILO current supply current

per input pin; VCC = 5.5 V;

ICC

• - 10 - 20 µA

VI = VCC or GND; IO = 0 A;

additional supply

per input; VCC = 4.5 V to 5.5 V;

• - 375 - 410 µA

∆ICC current

VI = VCC − 2.1 V; IO = 0 A

input capacitance

• 1.5 - -
• pF

CI

[1] Typical values are measured at Tamb = 25 °C.

11. Dynamic characteristics

Table 8. Dynamic characteristics Voltages are referenced to GND (ground = 0 V); all typical values are measured at Tamb = 25 °C; for test circuit see Figure 7.

74HC3G07 OFF-state to LOW nA to nY; see Figure 6 tPZL propagation delay

VCC = 2.0 V

• 25 95 - 125 ns

VCC = 4.5 V

• 9 19 - 25 ns

VCC = 6.0 V

• 7 16 - 20 ns

LOW to OFF-state nA to nY; see Figure 6 tPLZ propagation delay

VCC = 2.0 V

• 25 95 - 125 ns

VCC = 4.5 V

• 11 23 - 30 ns

VCC = 6.0 V

• 10 23 - 26 ns

HIGH to LOW output nY; see Figure 6 tTHL transition time

VCC = 2.0 V

• 18 95 - 125 ns

VCC = 4.5 V

• 6 19 - 25 ns

VCC = 6.0 V

• 5 16 - 20 ns

[1]

power dissipation

VI = GND to VCC

• 4 - - - pF

CPD capacitance

5 of 13

Page 6

Table 8. Dynamic characteristics …continued Voltages are referenced to GND (ground = 0 V); all typical values are measured at Tamb = 25 °C; for test circuit see Figure 7.

74HCT3G07

OFF-state to LOW nA to nY; see Figure 6 tPZL propagation delay

VCC = 4.5 V

• 11 27 - 32 ns

LOW to OFF-state nA to nY; see Figure 6 tPLZ propagation delay

VCC = 4.5 V

• 10 26 - 31 ns

HIGH to LOW output

VCC = 4.5 V; see Figure 6

• 6 19 - 22 ns

tTHL transition time

[1]

power dissipation

VI = GND to VCC − 1.5 V

• 4
• - pF

CPD capacitance

[1] CPD is used to determine the dynamic power dissipation (PD in µW). PD = CPD × VCC2 × fi × N + Σ(CL × VCC2 × fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; Σ(CL × VCC2 × fo) = sum of outputs.

12. Waveforms

Table 9. Measurement points

74HC3G07

0.5 × VCC

0.5 × VCC

0.1 × VCC

74HCT3G07

1.3 V

1.3 V

0.1 × VCC

6 of 13

Page 7

Table 10. Test data

74HC3G07

GND to VCC

≤ 6 ns

50 pF

1 kΩ

VCC

74HCT3G07

GND to 3 V

≤ 6 ns

50 pF

1 kΩ

VCC

7 of 13

Page 8

13. Package outline

TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm

SOT505-2

D

E

A X

c

HE

v M A

y

Z

5

8

A2 A

(A3)

A1

pin 1 index

θ Lp L

1

4

detail X

w M

e bp

0

2.5

5 mm

scale

DIMENSIONS (mm are the original dimensions)

Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.

REFERENCES

OUTLINE

EUROPEAN

ISSUE DATE

VERSION

PROJECTION

IEC

JEDEC

JEITA

02-01-16

SOT505-2

• - -

Fig 8. Package outline SOT505-2 (TSSOP8)

8 of 13

Page 9

VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm

SOT765-1

D

E

A X

c

y

HE

v M A

Z

5

8

Q

A2 A A1

(A3)

pin 1 index

θ Lp L

1

4

detail X

e

w M bp

0

2.5

5 mm

scale

DIMENSIONS (mm are the original dimensions)

Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included.

REFERENCES

OUTLINE

EUROPEAN

ISSUE DATE

VERSION

PROJECTION

IEC

JEDEC

JEITA

02-06-07

SOT765-1

MO-187

Fig 9. Package outline SOT765-1 (VSSOP8)

9 of 13

Page 10

XSON8U: plastic extremely thin small outline package; no leads;

SOT996-2

8 terminals; UTLP based; body 3 x 2 x 0.5 mm

B A

D

A

E

A1

detail X

terminal 1 index area

e1

C

C A B v M b e

L1

y

y1 C

w M C

1

4

L2

L

8

5

X

0 1 2 mm scale

DIMENSIONS (mm are the original dimensions)

Fig 10. Package outline SOT996-2 (XSON8U)

10 of 13

Page 11

14. Abbreviations

Table 11. Abbreviations Acronym

Description

CMOS

Complementary Metal Oxide Semiconductor

DUT

Device Under Test

ESD

ElectroStatic Discharge

HBM

Human Body Model

MM

Machine Model

TTL

Transistor-Transistor Logic

15. Revision history

Table 12. Revision history Document ID

Release date

Data sheet status

Change notice Supersedes

20090512

-

74HC_HCT3G07_1

• The format of this data sheet has been redesigned to comply with the new identity

Modifications:

guidelines of NXP Semiconductors.

• Legal texts have been adapted to the new company name where appropriate.
• Added type number 74HC3G07GD and 74HCT3G07GD (XSON8U package)

74HC_HCT3G07_1

20031015

Product specification

-

-

11 of 13

Page 12

16. Legal information

16.1 Data sheet status

Document status[1][2]

Product status[3]

Definition This document contains data from the objective specification for product development.

Objective [short] data sheet

Development

This document contains data from the preliminary specification.

Preliminary [short] data sheet Qualification

This document contains the product specification.

Product [short] data sheet

Production

[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.

16.2 Definitions

Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data

sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.

16.3 Disclaimers

General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed,

authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental

17. Contact information

For more information, please visit: http://www.nxp.com

damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of

the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail.

No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities.

16.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners.

For sales office addresses, please send an email to: salesaddresses@nxp.com

12 of 13

Page 13

18. Contents

1 General description . . . . . . . . . . . . . . . . . . . . . . 1 2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 3 Ordering information . . . . . . . . . . . . . . . . . . . . . 1 4 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 5 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 6 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2 6.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 6.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3 7 Functional description . . . . . . . . . . . . . . . . . . . 3 8 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3

9 Recommended operating conditions. . . . . . . . 4 10 Static characteristics. . . . . . . . . . . . . . . . . . . . . 4 11 Dynamic characteristics . . . . . . . . . . . . . . . . . . 5 12 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 13 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8 14 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . 11 15 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 11 16 Legal information. . . . . . . . . . . . . . . . . . . . . . . 12 16.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 12 16.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

16.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 16.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 12 17 Contact information. . . . . . . . . . . . . . . . . . . . . 12 18 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’.

© NXP B.V. 2009.

All rights reserved.

For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com

Date of release: 12 May 2009 Document identifier: 74HC_HCT3G07_2