Download PDF74HC139_V01 NXP
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 17
Technical content
mutually exclusive outputs (nY0 to nY3). Each decoder features an enable input (nE). Table 1. Ordering information
74 HCT139D
Product data sheet Rev. 4 — 11 December 2015 2 of 17 NXP Semiconductors 74HC139; 74HCT139 Dual 2-to-4 line decoder/demultiplexer 4. Functional diagram Fig 1. Logic symbol Fig 2. Functional diagram DDD DDD '(&2'(5 '(&2'(5 a. b. Fig 3. IEC Logic symbol DDD DDD
5.1 Pinning
5.2 Pin description
Table 2. Pin description
[1] For SO16 package: P tot derates linearly with 8 mW/K above 70 C. [2] For SSOP16 and TSSOP16 packages: P tot derates linearly with 5.5 mW/K above 60 C. Table 3. Function table [1] Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
- Recommended operating conditions
Table 5. Recommended operating conditions Table 6. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
[1] t pd is the same as tPLH and tPHL. [2] t t is the same as tTHL and tTLH. [3] C PD is used to determine the dynamic power dissipation (PD in W). (CL VCC2 fo) = sum of outputs. Table 7. Dynamic characteristics …continued Voltages are referenced to GND (ground = 0 V); CL = 50 pF unless otherwise specified; for test circuit see Figure 8. Measurement points are given in Table 8. VOL and VOH are typical voltage output levels that occur with the output load.
Measurement points are given in Table 8. VOL and VOH are typical voltage output levels that occur with the output load. Table 8. Measurement points
Test data is given in Table 9. RT = Termination resistance should be equal to output impedance Zo of the pulse generator. CL = Load capacitance including jig and probe capacitance. Table 9. Test data
Product data sheet Rev. 4 — 11 December 2015 11 of 17 NXP Semiconductors 74HC139; 74HCT139 Dual 2-to-4 line decoder/demultiplexer 12. Package outline Fig 9. Package outline SOT109-1 (SO16) ș ES GHWDLO; H F Y 0 $ SLQLQGH[ 81,7 $ PD[ $ $ $ ES F ' H + ( / / S 4 =\\ZY ș 5()(5(1&(6287/,1( 9(56,21 (8523($1 ,(& -('(& -(,7$ PP LQFKHV R R ',0(16,216 LQFKGLPHQVLRQVDUHGHULYHGIURPWKHRULJLQDOPPGLPHQVLRQV 1RWH 3ODVWLFRUPHWDOSURWUXVLRQVRIPP LQFK PD[LPXPSHUVLGHDUHQRWLQFOXGHG 627 ( 06 PP VFDOH SODVWLFVPDOORXWOLQHSDFNDJH OHDGV ERG\\ZLGWK PP 627
Product data sheet Rev. 4 — 11 December 2015 12 of 17 NXP Semiconductors 74HC139; 74HCT139 Dual 2-to-4 line decoder/demultiplexer Fig 10. Package outline SOT338-1 (SSOP16) 81,7 $ $ $ ES F ' H + ( / / S 4 =\\ZY ș 5()(5(1&(6287/,1( 9(56,21 (8523($1 ,(& -('(& -(,7$ PP R R ',0(16,216 PPDUHWKHRULJLQDOGLPHQVLRQV 1RWH 3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG 627 ES H F Y 0 $ ș GHWDLO; SLQLQGH[ PP VFDOH 6623 SODVWLFVKULQNVPDOORXWOLQHSDFNDJH OHDGV ERG\\ZLGWKPP 627 PD[
Product data sheet Rev. 4 — 11 December 2015 13 of 17 NXP Semiconductors 74HC139; 74HCT139 Dual 2-to-4 line decoder/demultiplexer Fig 11. Package outline SOT403-1 (TSSOP16) 81,7 $ $ $ ES F ' H + ( / / S 4 =\\ZY ș 5()(5(1&(6287/,1( 9(56,21 (8523($1 ,(& -('(& -(,7$ PP R R ',0(16,216 PPDUHWKHRULJLQDOGLPHQVLRQV 1RWHV 3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG 3ODVWLFLQWHUOHDGSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG 627 02 ES H ș GHWDLO; F Y 0 $ PP VFDOH 76623 SODVWLFWKLQVKULQNVPDOORXWOLQHSDFNDJH OHDGV ERG\\ZLGWKPP 627 PD[ SLQLQGH[
Table 10. Abbreviations Table 11. Revision history
- Type numbers 74HC139N and 74HCT139N (SOT38-4) removed. 74HC_HCT139 v.3 20140328 Product data sheet - 74HC_HCT139 v.2 Modifications:
- The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors.
- Legal texts have been adapted to the new company name where appropriate. 74HC_HCT139_CNV v.2 19930927 Product specification - -
Product data sheet Rev. 4 — 11 December 2015 15 of 17 NXP Semiconductors 74HC139; 74HCT139 Dual 2-to-4 line decoder/demultiplexer 15. Legal information
15.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
15.2 Definitions
Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet.
15.3 Disclaimers
Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
Product data sheet Rev. 4 — 11 December 2015 16 of 17 NXP Semiconductors 74HC139; 74HCT139 Dual 2-to-4 line decoder/demultiplexer Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products — Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors’ warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors’ specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors’ standard warranty and NXP Semiconductors’ product specifications. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions.
15.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 16. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com
NXP Semiconductors 74HC139; 74HCT139 Dual 2-to-4 line decoder/demultiplexer © NXP Semiconductors N.V. 2015. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 11 December 2015 Document identifier: 74HC_HCT139 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 17. Contents