TC74HC74AP_V01 TOSHIBA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 11

Technical content

Features

  • High speed: fmax = 77 MHz (typ.) at VCC = 5 V
  • Low power dissipation: ICC = 2 µA (max) at Ta = 25°C
  • High noise immunity: VNIH = VNIL = 28% VCC (min)
  • Output drive capability: 10 LSTTL loads
  • Symmetrical output impedance: |IOH| = IOL = 4 mA (min)
  • Balanced propagation delays: tpLH ∼ − tpHL
  • Wide operating voltage range: VCC (opr) = 2~6 V
  • Pin and function compatible with 74LS74 Pin Assignment Note: xxxFN (JEDEC SOP) is not available in Japan. TC74HC74AP TC74HC74AF TC74HC74AFN Weight DIP14-P-300-2.54 : 0.96 g (typ.) SOP14-P-300-1.27A : 0.18 g (typ.) SOP14-P-300-1.27 : 0.18 g (typ.) SOL14-P-150-1.27 : 0.12 g (typ.)

L L X X H H ⎯ H H L L H ⎯ H H H H L ⎯ H H X Q n nQ No Change X: Don’t care System Diagram

Absolute Maximum Ratings (Note 1) Characteristics Symbol Rating Unit Supply voltage range V CC −0.5~7 V DC input voltage V IN −0.5~VCC + 0.5 V DC output voltage V OUT −0.5~VCC + 0.5 V Input diode current I IK ±20 mA Output diode current I OK ±20 mA DC output current I OUT ±25 mA DC VCC/ground current I CC ±50 mA Power dissipation P D 500 (DIP) (Note 2)/180 (SOP) mW Storage temperature T stg −65~150 °C Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Note 2: 500 mW in the range of Ta = −40 to 65°C. From Ta = 65 to 85°C a derating factor of −10 mW/°C shall be applied until 300 mW. Recommended Operating Conditions (Note) Characteristics Symbol Rating Unit Supply voltage V CC 2~6 V Input voltage V IN 0~V CC V Output voltage V OUT 0~V CC V Operating temperature T opr −40~85 °C Input rise and fall time t r, tf 0~1000 (VCC = 2.0 V) ns Note: The recommended operating conditions are required to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND.

Electrical Characteristics

Test Condition Ta = 25°C Ta = −40~85°C Characteristics Symbol VCC (V) Min Typ. Max Min Max Unit High-level input voltage VIH ⎯ 2.0 4.5 6.0 1.50 3.15 4.20 1.50 3.15 4.20 V Low-level input voltage VIL ⎯ 2.0 4.5 6.0 0.50 1.35 1.80 0.50 1.35 1.80 V IOH = −20 µA 2.0 4.5 6.0 1.9 4.4 5.9 2.0 4.5 6.0 1.9 4.4 5.9 ⎯ High-level output voltage VOH VIN = VIH or VIL IOH = −4 mA IOH = −5.2 mA 4.5 6.0 4.18 5.68 4.31 5.80 4.13 5.63 V IOL = 20 µA 2.0 4.5 6.0 0.0 0.0 0.0 0.1 0.1 0.1 0.1 0.1

0.1 Low-level output

= VIH or VIL IOL = 4 mA IOL = 5.2 mA 4.5 6.0 0.17 0.18 0.26 0.26 0.33 0.33 V Input leakage current IIN VIN = VCC or GND 6.0 ⎯ ⎯ ±0.1 ⎯ ±1.0 µA Quiescent supply current ICC VIN = VCC or GND 6.0 ⎯ ⎯ 2.0 ⎯ 20.0 µA

Timing Requirements (input: tr = tf = 6 ns) Test Condition Ta = 25°C Ta = −40 ~85°C Characteristics Symbol V CC (V) Typ. Limit Limit Unit Minimum pulse width (CK) tW (L) tW (H) 2.0 4.5 6.0 ns Minimum pulse width ( CLR , PR ) tW (L) ⎯ 2.0 4.5 6.0 ns Minimum set-up time t s ⎯ 2.0 4.5 6.0 ns Minimum hold time t h ⎯ 2.0 4.5 6.0 ns Minimum removal time ( CLR , PR ) trem ⎯ 2.0 4.5 6.0 ns Clock frequency f ⎯ 2.0 4.5 6.0 MHz AC Characteristics (CL = 15 pF, VCC = 5 V, Ta = 25°C, input: tr = tf = 6 ns) Characteristics Symbol Test Condition Min Typ. Max Unit Output transition time tTLH tTHL ⎯ ⎯ 6 12 ns Propagation delay time (CK-Q, Q ) tpLH tpHL ⎯ ⎯ 13 26 ns Propagation delay time ( CLR , PR -Q, Q ) tpLH tpHL ⎯ ⎯ 14 26 ns Maximum clock frequency f max ⎯ 36 77 ⎯ MHz

AC Characteristics (CL = 50 pF, input: tr = tf = 6 ns) Test Condition Ta = 25°C Ta = −40~85°C Characteristics Symbol VCC (V) Min Typ. Max Min Max Unit Output transition time tTLH tTHL 2.0 4.5 6.0 ns Propagation delay time (CK-Q, Q ) tpLH tpHL 2.0 4.5 6.0 150 190 ns Propagation delay time ( CLR , PR -Q, Q ) tpLH tpHL 2.0 4.5 6.0 150 190 ns Maximum clock frequency fmax ⎯ 2.0 4.5 6.0 MHz Input capacitance C IN ⎯ ⎯ 5 10 ⎯ 10 pF Power dissipation capacitance CPD (Note) ⎯ 34 ⎯ ⎯ ⎯ pF Note: C PD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPD・VCC・fIN + ICC/2 (per F/F)

Weight: 0.96 g (typ.)

Weight: 0.18 g (typ.)

Weight: 0.18 g (typ.)

Package Dimensions (Note) Note: This package is not available in Japan. Weight: 0.12 g (typ.)

Note: Lead (Pb)-Free Packages DIP14-P-300-2.54 SOP14-P-300-1.27A SOL14-P-150-1.27 RESTRICTIONS ON PRODUCT USE 060116EBA

  • The information contained herein is subject to change without notice. 021023_D
  • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utiliz ing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handli ng Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. 021023_A
  • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. 021023_B
  • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. 060106_Q
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. 021023_C
  • The products described in this document are subject to the foreign exchange and foreign trade laws. 021023_E