74HC7245 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 7
Technical content
Product specification File under Integrated Circuits, IC06 December 1990 INTEGRATED CIRCUITS 74HC/HCT7245 Octal bus Schmitt-trigger transceiver; 3-state For a complete data sheet, please also download:
- The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
- The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
- The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
Philips Semiconductors Product specification Octal bus Schmitt-trigger transceiver; 3-state 74HC/HCT7245
FEATURES
- Octal bidirectional bus interface
- Non-inverting 3-state outputs
- Output capability: bus driver
- ICC category: MSI
- Schmitt-trigger action on all data inputs GENERAL DESCRIPTION The 74HC/HCT7245 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT7245 are octal transceivers featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The “7245” features an output enable OE) input for easy cascading and a send/receive input (DIR) for direction control. OE controls the outputs so that the buses are effectively isolated. The 74HC/HCT7245 have Schmitt-trigger inputs. These inputs are capable of transforming slowly changing input signals into sharply defined jitter-free output signals. The “7245” is identical to the “245” but has hysteresis on the data inputs. FUNCTION TABLE Notes 1. H = HIGH voltage level L = LOW voltage level X = don’t care Z = high impedance OFF-state INPUTS INPUTS/OUTPUTS OE DIR A n B n L L H L H X A=B inputs Z inputs B=A Z QUICK REFERENCE DATA GND = 0 V; Tamb =2 5°C; tr =tf= 6 ns Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD =C PD × VCC 2 × fi+∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC 2 × fo) = sum of outputs C L = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI= GND to VCC For HCT the condition is VI= GND to VCC − 1.5 V
ORDERING INFORMATION
See “74HC/HCT/HCU/HCMOS Logic Package Information”. SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPHL / tPLH propagation delay An to Bn C L = 15 pF; VCC = 5 V 8 12 ns C I input capacitance 3.5 3.5 pF C I/O input/output capacitance 10 10 pF C PD power dissipation capacitance per transceiver notes 1 and 2 40 40 pF
Philips Semiconductors Product specification Octal bus Schmitt-trigger transceiver; 3-state 74HC/HCT7245 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION
1 DIR direction control
2, 3, 4, 5, 6, 7, 8, 9 A 0 to A7 data inputs/outputs
10 GND ground (0 V)
18, 17, 16, 15, 14, 13, 12, 11 B 0 to B7 data inputs/outputs
19 OE output enable input (active LOW)
20 V CC positive supply voltage
Fig.1 Pin configuration. alfpage DIR A 0 GND B 7 OE VCC A 1 A 2 A 3 A 4 A 5 A 6 A 7 B 6 B 5 B 4 B 3 B 2 B 1 B 0 7245 MBA327 Fig.2 Functional diagram. ge MBA330 9 11 OE DIR Fig.3 IEC logic symbol. age MBA404 182 3EN1 3EN2
Philips Semiconductors Product specification Octal bus Schmitt-trigger transceiver; 3-state 74HC/HCT7245 DC CHARACTERISTICS FOR 74HC For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: bus driver ICC category: MSI TRANSFER CHARACTERISTICS FOR 74HC Voltages are referred to GND (ground = 0 V) AC CHARACTERISTICS FOR 74HC GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS+25 −40 to+85 −40 to+125 VT+ positive-going threshold 1.50 3.15 4.20 1.50 3.15 4.20 1.50 3.15 4.20 V 2.0 4.5 6.0 Figs. 4 and 5 V T− negative-going threshold 0.30 1.35 1.80 0.30 1.35 1.80 0.30 1.35 1.80 V 2.0 4.5 6.0 Figs. 4 and 5 V H hysteresis (VT+ − VT−) 0.1 0.25 0.3 0.2 0.4 0.5 0.1 0.25 0.3 0.1 0.25 0.3 V 2.0 4.5 6.0 Figs. 4 and 5 SYMBOL PARAMETER T amb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS+25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay An to Bn; Bn to An 100 125 150 ns 2.0 4.5 6.0 Fig.7 t PZH / tPZL 3-state output enable time OE to An; OE to Bn 160 200 240 ns 2.0 4.5 6.0 Fig.7 t PHZ / tPLZ 3-state output disable time OE to An; OE to Bn 160 200 240 ns 2.0 4.5 6.0 Fig.7 t THL / tTLH output transition time 14 ns 2.0 4.5 6.0 Fig.7
Philips Semiconductors Product specification Octal bus Schmitt-trigger transceiver; 3-state 74HC/HCT7245 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: bus driver ICC category: MSI Note to HCT types The value of additional quiescent supply current (ΔICC ) for a unit load of 1 is given in the family specifications. To determineΔICC per input, multiply this value by the unit load coefficient shown in the table below. TRANSFER CHARACTERISTICS FOR 74HCT Voltages are referred to GND (ground = 0 V) INPUT UNIT LOAD COEFFICIENT An Bn OE DIR 0.33 0.33 1.50 1.00 SYMBOL PARAMETER T amb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) WAVEFORMS+25 −40 to+85 −40 to+125 VT+ positive-going threshold 2.0 2.1 2.0 2.1 2.0 2.1 V 4.5 5.5 Figs. 4 and 5 VT− negative-going threshold 0.7 0.8 0.64 0.74 0.6 0.7 V 4.5 5.5 Figs. 4 and 5 VH hysteresis (VT+ − VT−) 0.17 0.17 0.23 0.23 V 4.5 5.5 Figs. 4 and 5
Philips Semiconductors Product specification Octal bus Schmitt-trigger transceiver; 3-state 74HC/HCT7245 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) WAVEFORMS+25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay An to Bn; Bn to An 17 30 37 45 ns 4.5 Fig.7 tPZH / tPZL 3-state output enable time OE to An; OE to Bn 19 32 40 48 ns 4.5 Fig.7 tPHZ / tPLZ 3-state output disable time OE to An; OE to Bn 19 32 40 48 ns 4.5 Fig.7 tTHL / tTLH output transition time 5 12 15 18 ns 4.5 Fig.7 TRANSFER CHARACTERISTIC WAVEFORMS Fig.4 Transfer characteristic. handbook, halfpage MBA325 V TV T VH V I VO Fig.5 Waveforms showing the definition of VT+, VT − and VH . handbook, halfpage MBA324 V T V T VHV I VO
Philips Semiconductors Product specification Octal bus Schmitt-trigger transceiver; 3-state 74HC/HCT7245 AC WAVEFORMS PACKAGE OUTLINES See “74HC/HCT/HCU/HCMOS Logic Package Outlines”. Fig.6 Waveforms showing the input (An, Bn) to output (Bn,An) propagation delays and the output transition times. (1) HC : V M = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.7 Waveforms showing the 3-state enable and disable times. handbook, full pagewidth MBA322 tPLZ VM (1) tPZL V M (1) V M (1) outputs disabled outputs enabled tPZH 90 % tPHZ 10 % 90 % tftr outputs enabled OUTPUT LOW - to - OFF OFF - to - LOW OUTPUT HIGH - to - OFF OFF - to - HIGH OE INPUT n 10 % (1) HC : V M = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V.