74HC583 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 13

Technical content

Product specification Supersedes data of December 1990 File under Integrated Circuits, IC06

1998 Mar 31

4-bit full adder with fast carry For a complete data sheet, please also download:

  • The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines

1998 Mar 31 2

Philips Semiconductors Product specification 4-bit full adder with fast carry 74HC/HCT583

FEATURES

  • Adds two decimal numbers
  • Full internal look-ahead
  • Fast ripple carry for economical expansion
  • Output capability: standard driver
  • ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT583 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JECEC standard no. 7A. The 74HC/HCT583 are high-speed 4-bit BCD full adders with internal carry look-ahead. They accept two 4-bit decimal numbers (A 0 to A3 and B0 to B3) and a carry input (CIN). The “583” generates the decimal sum outputs (∑ 0 to∑ 3) and a carry output (Cn+4) if the sum is greater than 9. If an addition of two BCD numbers produce a number greater than 9, a valid BCD number and a carry will result. For input values larger than 9, the number is converted from binary to BCD. Binary to BCD conversion occurs by grounding one set of inputs, A n or Bn and applying a 4-bit binary number to the other set of inputs. If the input is between 0 and 9, a BCD number occurs at the output. If the binary input falls between 10 and 15, a carry term is generated. Both the carry term and the sum are the BCD equivalent of the binary input. Converting binary numbers greater than 16 may be achieved by cascading “583s”. See the “283” for the binary version. QUICK REFERENCE DATA GND = 0 V; T amb =2 5°C; tr =tf=6n s Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD =C PD × VCC 2 × fi+ ∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC 2 × fo) = sum of outputs C L = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI= GND to VCC For HCT the condition is VI= GND to VCC − 1.5 V SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPHL/ tPLH propagation delay C L = 15 pF; VCC =5V C IN to Cn+4 20 23 ns An, Bn to Cn+4 23 27 ns C I input capacitance 3.5 3.5 pF C PD power dissipation capacitance per package notes 1 and 2 116 120 pF

1998 Mar 31 3

Philips Semiconductors Product specification 4-bit full adder with fast carry 74HC/HCT583

ORDERING INFORMATION

74HC583 DIP16 plastic dual in-line package; 16 leads (300 mil); long body SOT38-1 74HC583 SO16 plastic small outline package; 16 leads; body width 3.9 mm SOT109-1 74HCT583 DIP16 plastic dual in-line package; 16 leads (300 mil); long body SOT38-1 74HCT583 SO16 plastic small outline package; 16 leads; body width 3.9 mm SOT109-1 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 5C IN carry input 6C n+4 carry output

8 GND ground (0 V)

11, 10, 7, 9 ∑ 0 to∑ 3 sum outputs 12, 1, 2, 3 B 0 to B3 B operand inputs 13, 14, 15, 4 A0 to A3 A operand inputs

16 V CC positive supply voltage

Fig.1 Pin configuration. handbook, halfpage 583 MGM851 C IN C n + 4 ∑ 2 GND ∑ 3 ∑ 1 ∑ 0 VCC Fig.2 Logic symbol. handbook, halfpage MGM852 B1 B2 B3A3 C IN C n + 4 ∑ 2 ∑ 3∑ 1∑ 0 B0A0 A1 A2 13 12 14 1 15 2 11 10 Fig.3 IEC logic symbol. handbook, halfpage MGM853 P Q (BCD) 5 6 C0C1

1998 Mar 31 4

Philips Semiconductors Product specification 4-bit full adder with fast carry 74HC/HCT583 Fig.4 Functional diagram. handbook, halfpage MGM854 B1 B2 B3A3 C IN C n + 4 ∑ 2 ∑ 3∑ 1∑ 0 B0A0 A1 A2 13 12 14 1 15 2 11 10 5 6

1998 Mar 31 5

Philips Semiconductors Product specification 4-bit full adder with fast carry 74HC/HCT583 Fig.5 Logic diagram. handbook, full pagewidth MGM856 C IN C n + 4

1998 Mar 31 6

Philips Semiconductors Product specification 4-bit full adder with fast carry 74HC/HCT583 DC CHARACTERISTICS FOR 74HC For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr =tf= 6 ns; CL =5 0p F SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS +25 −40 to +85 −40 to +125 tPHL / tPLH propagation delay C IN to∑ 0 50 155 195 235 ns 2.0 Fig.6 18 31 39 47 4.5 14 26 33 40 6.0 t PHL / tPLH propagation delay C IN to∑ 1 113 350 440 525 ns 2.0 Fig.6 41 70 88 105 4.5 33 60 75 90 6.0 t PHL / tPLH propagation delay C IN to∑ 2 100 305 380 460 ns 2.0 Fig.6 36 61 76 92 4.5 29 52 65 78 6.0 t PHL / tPLH propagation delay C IN to∑ 3 110 340 425 510 ns 2.0 Fig.6 40 68 85 102 4.5 32 58 72 87 6.0 t PHL / tPLH propagation delay An or Bn to∑ 0 50 155 195 235 ns 2.0 Fig.6 18 31 39 47 4.5 14 26 33 40 6.0 t PHL / tPLH propagation delay An or Bn to∑ 1 120 365 455 550 ns 2.0 Fig.6 43 73 91 110 4.5 34 62 77 94 6.0 t PHL / tPLH propagation delay An or Bn to∑ 2 105 325 405 490 ns 2.0 Fig.6 38 65 81 98 4.5 30 55 69 83 6.0 t PHL / tPLH propagation delay An or Bn to∑ 3 116 355 445 535 ns 2.0 Fig.6 42 71 89 107 4.5 34 60 76 91 6.0 t PHL / tPLH propagation delay C IN to Cn+4 63 195 245 295 ns 2.0 Fig.6 23 39 49 59 4.5 18 33 42 50 6.0 t PHL / tPLH propagation delay An to Cn+4 72 220 275 330 ns 2.0 Fig.6 26 44 55 66 4.5 21 37 47 56 6.0

1998 Mar 31 7

Philips Semiconductors Product specification 4-bit full adder with fast carry 74HC/HCT583 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI Note to HCT types The value of additional quiescent supply current (ΔICC ) for a unit load of 1 is given in the family specifications. To determineΔICC per input, multiply this value by the unit load coefficient shown in the table below. tPHL / tPLH propagation delay Bn to Cn+4 74 230 290 345 ns 2.0 Fig.6 27 46 58 69 4.5 22 39 49 59 6.0 t THL / tTLH output transition time standard outputs 19 75 95 110 ns 2.0 Fig.6 7 15 19 22 4.5 6 13 16 19 6.0 INPUT UNIT LOAD COEFFICIENT A n, Bn 0.4 C IN 1.5 SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS +25 −40 to +85 −40 to +125

1998 Mar 31 8

Philips Semiconductors Product specification 4-bit full adder with fast carry 74HC/HCT583 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr =tf= 6 ns; CL =5 0p F SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) WAVEFORMS +25 −40 to +85 −40 to +125 tPHL / tPLH propagation delay C IN to∑ 0 20 34 43 51 ns 4.5 Fig.6 tPHL / tPLH propagation delay C IN to∑ 1 40 68 85 102 ns 4.5 Fig.6 tPHL / tPLH propagation delay C IN to∑ 2 38 65 81 98 ns 4.5 Fig.6 tPHL / tPLH propagation delay C IN to∑ 3 38 65 81 98 ns 4.5 Fig.6 tPHL / tPLH propagation delay An or Bn to∑ 0 22 37 46 56 ns 4.5 Fig.6 tPHL / tPLH propagation delay An or Bn to∑ 1 43 73 91 110 ns 4.5 Fig.6 tPHL / tPLH propagation delay An or Bn to∑ 2 40 68 85 102 ns 4.5 Fig.6 tPHL / tPLH propagation delay An or Bn to∑ 3 41 70 88 105 ns 4.5 Fig.6 tPHL / tPLH propagation delay C IN to Cn+4 27 46 58 69 ns 4.5 Fig.6 tPHL / tPLH propagation delay An to Cn+4 31 53 66 80 ns 4.5 Fig.6 tPHL / tPLH propagation delay Bn to Cn+4 30 51 64 77 ns 4.5 Fig.6 tTHL / tTLH output transition time standard outputs 7 15 19 22 ns 4.5 Fig.6

1998 Mar 31 9

Philips Semiconductors Product specification 4-bit full adder with fast carry 74HC/HCT583 AC WAVEFORMS Fig.6 Waveforms showing the inputs (CIN, An, Bn) to the outputs (∑ n, Cn+4) propagation delays and the output transition times. (1) HC: VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. book, full pagewidth MGM855 tPHL tPLH VM (1) VM (1) tTHL tTLH C IN, An, Bn INPUT ∑ n, Cn + 4 OUTPUT

1998 Mar 31 10

Philips Semiconductors Product specification 4-bit full adder with fast carry 74HC/HCT583 PACKAGE OUTLINES UNIT A max. 1 2 b1 cE e M HL REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC EIAJ mm inches DIMENSIONS (inch dimensions are derived from the original mm dimensions) SOT38-1 92-10-02 95-01-19 A min. A max. b max.wM Ee1 1.40 1.14 0.055 0.045 0.53 0.38 0.32 0.23 21.8 21.4 0.86 0.84 6.48 6.20 0.26 0.24 3.9 3.4 0.15 0.13 0.2542.54 7.62 0.30 8.25 7.80 0.32 0.31 9.5 8.3 0.37 0.33 2.2 0.087 4.7 0.51 3.7 0.15 0.021 0.015 0.013 050G09 MO-001AE M H c (e )1 M E A L seating plane w M e D A 2 Z b E pin 1 index 0 5 10 mm scale Note 1. Plastic or metal protrusions of 0.25 mm maximum per side are not included. (1) (1)D (1)Z DIP16: plastic dual in-line package; 16 leads (300 mil); long body SOT38-1

1998 Mar 31 11

Philips Semiconductors Product specification 4-bit full adder with fast carry 74HC/HCT583 X w M θ AA 1 A 2 bp D H E Lp Q detail X E Z e c L v M A (A )3 A y pin 1 index UNIT A max. A 1 A 2 A 3 bp cD (1) E (1) (1)eH E LL p QZ ywv θ REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC EIAJ mm inches 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 10.0 9.8 4.0 3.8 1.27 6.2 5.8 0.7 0.6 0.7 0.3 8 o o 0.25 0.1 DIMENSIONS (inch dimensions are derived from the original mm dimensions) Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 1.0 0.4 SOT109-1 95-01-23 97-05-22 076E07S MS-012AC 0.069 0.010 0.004 0.057 0.049 0.01 0.019 0.014 0.0100 0.0075 0.39 0.38 0.16 0.15 0.050 1.05 0.0410.244 0.228 0.028 0.020 0.028 0.0120.01 0.25 0.01 0.0040.039 0.016 0 2.5 5 mm scale SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

1998 Mar 31 12

Philips Semiconductors Product specification 4-bit full adder with fast carry 74HC/HCT583 SOLDERING Introduction There is no soldering method that is ideal for all IC packages. Wave soldering is often preferred when through-hole and surface mounted components are mixed on one printed-circuit board. However, wave soldering is not always suitable for surface mounted ICs, or for printed-circuits with high population densities. In these situations reflow soldering is often used. This text gives a very brief insight to a complex technology. A more in-depth account of soldering ICs can be found in our “Data Handbook IC26; Integrated Circuit Packages” (order code 9398 652 90011). DIP SOLDERING BY DIPPING OR BY WAVE The maximum permissible temperature of the solder is 260 °C; solder at this temperature must not be in contact with the joint for more than 5 seconds. The total contact time of successive solder waves must not exceed 5 seconds. The device may be mounted up to the seating plane, but the temperature of the plastic body must not exceed the specified maximum storage temperature (T stg max). If the printed-circuit board has been pre-heated, forced cooling may be necessary immediately after soldering to keep the temperature within the permissible limit. R EPAIRING SOLDERED JOINTS Apply a low voltage soldering iron (less than 24 V) to the lead(s) of the package, below the seating plane or not more than 2 mm above it. If the temperature of the soldering iron bit is less than 300°C it may remain in contact for up to 10 seconds. If the bit temperature is between 300 and 400°C, contact may be up to 5 seconds. SO R EFLOW SOLDERING Reflow soldering techniques are suitable for all SO packages. Reflow soldering requires solder paste (a suspension of fine solder particles, flux and binding agent) to be applied to the printed-circuit board by screen printing, stencilling or pressure-syringe dispensing before package placement. Several techniques exist for reflowing; for example, thermal conduction by heated belt. Dwell times vary between 50 and 300 seconds depending on heating method. Typical reflow temperatures range from 215 to 250°C. Preheating is necessary to dry the paste and evaporate the binding agent. Preheating duration: 45 minutes at 45 °C. W AVE SOLDERING Wave soldering techniques can be used for all SO packages if the following conditions are observed:

  • A double-wave (a turbulent wave with high upward pressure followed by a smooth laminar wave) soldering technique should be used.
  • The longitudinal axis of the package footprint must be parallel to the solder flow.
  • The package footprint must incorporate solder thieves at the downstream end. During placement and before soldering, the package must be fixed with a droplet of adhesive. The adhesive can be applied by screen printing, pin transfer or syringe dispensing. The package can be soldered after the adhesive is cured. Maximum permissible solder temperature is 260°C, and maximum duration of package immersion in solder is 10 seconds, if cooled to less than 150°C within 6 seconds. Typical dwell time is 4 seconds at 250°C. A mildly-activated flux will eliminate the need for removal of corrosive residues in most applications. R EPAIRING SOLDERED JOINTS Fix the component by first soldering two diagonally- opposite end leads. Use only a low voltage soldering iron (less than 24 V) applied to the flat part of the lead. Contact time must be limited to 10 seconds at up to 300°C. When using a dedicated tool, all other leads can be soldered in one operation within 2 to 5 seconds between 270 and 320°C.

1998 Mar 31 13

Philips Semiconductors Product specification 4-bit full adder with fast carry 74HC/HCT583 DEFINITIONS LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability.

Application information

Where application information is given, it is advisory and does not form part of the specification.