74HC563N PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 7
Technical content
Product specification File under Integrated Circuits, IC06 December 1990 INTEGRATED CIRCUITS 74HC/HCT563 Octal D-type transparent latch; 3-state; inverting For a complete data sheet, please also download:
- The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
- The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
- The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
Philips Semiconductors Product specification Octal D-type transparent latch; 3-state; inverting 74HC/HCT563
FEATURES
- 3-state inverting outputs for bus oriented applications
- Inputs and outputs on opposite sides of package allowing easy interface with microprocessor
- Common 3-state output enable input
- Output capability: bus driver
- I CC category: MSI GENERAL DESCRIPTION The 74HC/HCT563 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT563 are octal D-type transparent latches featuring separate D-type inputs for each latch and inverting 3-state outputs for bus oriented applications. A latch enable (LE) input and an output enable ( OE) input are common to all latches. The “563” is functionally identical to the “573”, but has inverted outputs. The “563” consists of eight D-type transparent latches with 3-state inverting outputs. The LE and OE are common to all latches. When LE is HIGH, data at the Dn inputs enter the latches. In this condition the latches are transparent, i.e. a latch output will change state each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the D-inputs a set-up time preceding the HIGH-to-LOW transition of LE. When OE is LOW, the contents of the 8 latches are available at the outputs. When OE is HIGH, the outputs go to the high impedance OFF-state. Operation of the OE input does not affect the state of the latches. QUICK REFERENCE DATA GND = 0 V; Tamb =2 5°C; tr =tf= 6 ns Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD =C PD × VCC 2 × fi+ ∑ (CL × VCC 2 ×fo) where: fi= input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC 2 × fo) = sum of outputs C L = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI= GND to VCC for HCT the condition is VI= GND to VCC − 1.5 V
ORDERING INFORMATION
See “74HC/HCT/HCU/HCMOS Logic Package Information”. SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPHL/ tPLH propagation delay Dn, LE toQ n C L = 15 pF; VCC =5 V 1 4 1 6 n s C I input capacitance 3.5 3.5 pF C PD power dissipation capacitance per latch notes 1 and 2 19 19 pF
Philips Semiconductors Product specification Octal D-type transparent latch; 3-state; inverting 74HC/HCT563 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 2, 3, 4, 5, 6, 7, 8, 9 D 0 to D7 data inputs
11 LE latch enable input (active HIGH)
OE 3-state output enable input (active LOW)
10 GND ground (0 V)
19, 18, 17, 16, 15, 14, 13, 12 Q 0 toQ 7 3-state latch outputs
20 V CC positive supply voltage
Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.
Philips Semiconductors Product specification Octal D-type transparent latch; 3-state; inverting 74HC/HCT563 Fig.4 Functional diagram. FUNCTION TABLE Notes 1. H = HIGH voltage level h = HIGH voltage level one set-up time prior to the HIGH-to-LOW LE transition L = LOW voltage level l = LOW voltage level one set-up time prior to the HIGH-to-LOW LE transition Z = high impedance OFF-state OPERATING MODES INPUTS INTER- NAL LATCHES OUT- PUTS OE LE D n Q 0 toQ 7 enable and read register L L H H L H L H H L latch and read register L L L L l h L H H L latch register and disable outputs H H L L l h L H Z Z Fig.5 Logic diagram.
Philips Semiconductors Product specification Octal D-type transparent latch; 3-state; inverting 74HC/HCT563 DC CHARACTERISTICS FOR 74HC For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: bus driver ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS+25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay D n toQ n 145 180 220 ns 2.0 4.5 6.0 Fig.6 t PHL / tPLH propagation delay LE toQ n 145 180 220 ns 2.0 4.5 6.0 Fig.7 t PZH / tPZL 3-state output enable time OE toQ n 150 190 225 ns 2.0 4.5 6.0 Fig.8 t PHZ / tPLZ 3-state output disable time OE toQ n 150 190 225 ns 2.0 4.5 6.0 Fig.8 t THL / tTLH output transition time 14 ns 2.0 4.5 6.0 Fig.6 t W enable pulse width HIGH 100 120 ns 2.0 4.5 6.0 Fig.7 t su set-up time D n to LE ns 2.0 4.5 6.0 Fig.9 t h hold time D n to LE ns 2.0 4.5 6.0 Fig.9
Philips Semiconductors Product specification Octal D-type transparent latch; 3-state; inverting 74HC/HCT563 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: bus driver ICC category: MSI Note to HCT types The value of additional quiescent supply current (ΔICC ) for a unit load of 1 is given in the family specifications. To determineΔICC per input, multiply this value by the unit load coefficient shown in the table below. AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr =tf= 6 ns; CL = 50 pF INPUT UNIT LOAD COEFFICIENT D n LE OE 0.35 0.65 1.25 SYMBOL PARAMETER T amb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) WAVEFORMS+25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay D n toQ n 18 30 38 45 ns 4.5 Fig.6 tPHL / tPLH propagation delay LE toQ n 19 35 44 53 ns 4.5 Fig.7 tPZH / tPZL 3-state output enable timeOE toQ n 20 35 44 53 ns 4.5 Fig.8 tPHZ / tPLZ 3-state output disable timeOE toQ n 22 35 44 53 ns 4.5 Fig.8 tTHL / tTLH output transition time 5 12 15 18 ns 4.5 Fig.6 tW enable pulse width HIGH 16 5 20 24 ns 4.5 Fig.7 tsu set-up time D n to LE 10 3 13 15 ns 4.5 Fig.9 th hold time D n to LE 5 −1 5 5 ns 4.5 Fig.9
Philips Semiconductors Product specification Octal D-type transparent latch; 3-state; inverting 74HC/HCT563 AC WAVEFORMS Fig.6 Waveforms showing the data input (Dn) to output (Q n) propagation delays and the output transition times. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.7 Waveforms showing the latch enable input (LE) pulse width, the latch enable input to output ( Q n) propagation delays and the output transition times. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.8 Waveforms showing the 3-state enable and disable times. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. PACKAGE OUTLINES See “74HC/HCT/HCU/HCMOS Logic Package Outlines”. Fig.9 Waveforms showing the data set-up and hold times for Dn input to LE input The shaded areas indicate when the input is permitted to change for predictable output performance. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V.