74HC4538 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 13
Technical content
Product specification File under Integrated Circuits, IC06 September 1993 INTEGRATED CIRCUITS 74HC/HCT4538 Dual retriggerable precision monostable multivibrator For a complete data sheet, please also download:
- The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
- The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
- The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
Philips Semiconductors Product specification Dual retriggerable precision monostable multivibrator 74HC/HCT4538
FEATURES
- Separate reset inputs
- Triggering from leading or trailing edge
- Output capability: standard
- ICC category: MSI
- Power-on reset on-chip GENERAL DESCRIPTION The 74HC/HCT4538 are high-speed Si-gate CMOS devices and are pin compatible with “4538” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4538 are dual retriggerable-resettable monostable multivibrators. Each multivibrator has an active LOW trigger/retrigger input (n A0), an active HIGH trigger/retrigger input (nA1) , an overriding active LOW direct reset input (nR D ), an output (nQ) and its complement (nQ), and two pins (nCTC and nRCTC ) for connecting the external timing components Ctand Rt. Typical pulse width variation over temperature range is± 0.2%. The “4538” may be triggered by either the positive or the negative edges of the input pulse. The duration and accuracy of the output pulse are determined by the external timing components C tand Rt. The output pulse width (T) is equal to 0.7× R t × C t. The linear design techniques guarantee precise control of the output pulse width. A LOW level at n R D terminates the output pulse immediately. Schmitt-trigger action in the trigger inputs makes the circuit highly tolerant to slower rise and fall times. QUICK REFERENCE DATA GND = 0 V; Tamb = 25°C; tr = tf= 6 ns Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD = CPD × VCC 2 × fi+∑ (CL × VCC 2 × fo)+ + 0.48× C EXT × VCC 2 × fo + D × 0.8× VCC where: fi= input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC 2 × fo) = sum of outputs C L = output load capacitance in pF VCC = supply voltage in V D = duty factor in % C EXT = timing capacitance in pF 2. For HC the condition is VI= GND to VCC For HCT the condition is VI= GND to VCC − 1.5 V
ORDERING INFORMATION
See “74HC/HCT/HCU/HCMOS Logic Package Information”. SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPHL / tPLH propagation delay nA0,n A1 to nQ, nQC L = 15 pF; VCC = 5 V 27 30 ns C I input capacitance 3.5 3.5 pF C PD power dissipation capacitance per multivibrator notes 1 and 2 136 138 pF
Philips Semiconductors Product specification Dual retriggerable precision monostable multivibrator 74HC/HCT4538 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 1, 15 1C TC ,2 CTC external capacitor connections 2, 14 1RC TC , 2RCTC external resistor/capacitor connections 3, 13 1 R D ,2R D direct reset inputs (active LOW) 4, 12 1A 1,2 A1 trigger inputs (LOW-to-HIGH, edge-triggered) 5, 11 1 A0,2A0 trigger inputs (HIGH-to-LOW, edge-triggered) 6, 10 1Q, 2Q pulse outputs 7, 9 1 Q, 2Q complementary pulse outputs
8 GND ground (0 V)
CC positive supply voltage Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.
Philips Semiconductors Product specification Dual retriggerable precision monostable multivibrator 74HC/HCT4538 Fig.4 Functional diagram. Fig.5 Connection of the external timing components Rtand Ct. (1) Connect CTC (pins 1 and 15) to GND (pin 8). FUNCTION TABLE Notes 1. H = HIGH voltage level L = LOW voltage level X = don’t care ↑ = LOW-to-HIGH transition ↓ = HIGH-to-LOW transition = one HIGH level output pulse = one LOW level output pulse INPUTS OUTPUTS n A 0 nA 1 nR D nQ n Q ↓ LH H ↑ H XXL L H Fig.6 Timing diagram. (1) Positive edge triggering. (2) Positive edge retriggering (pulse lengthening). (3) Negative edge triggering. (4) Reset (pulse shortening). (5) V ref1and Vref2are internal reference voltages. (6) T = 0.7× R t× C t(see also Fig.5).
Philips Semiconductors Product specification Dual retriggerable precision monostable multivibrator 74HC/HCT4538 handbook, full pagewidth MBA338 V ref2 ref1V GND nC TC nRC TC enable enable VCC power - on reset VCC nR D nA1 nA0 nQ nQ Fig.7 Logic diagram (Vref1and Vref2are internal reference voltages).
Philips Semiconductors Product specification Dual retriggerable precision monostable multivibrator 74HC/HCT4538 DC CHARACTERISTICS FOR 74HC For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr = tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) OTHER+25 −40 to+85 −40 to+125 tPLH propagation delay nA0,n A1 to nQ 265 330 400 ns 2.0 4.5 6.0 Fig.8 t PHL propagation delay nA0,n A1 to nQ 265 330 400 ns 2.0 4.5 6.0 Fig.8 t PHL propagation delay nR D to nQ 265 330 400 ns 2.0 4.5 6.0 Fig.8 t PLH propagation delay nR D to nQ 265 340 400 ns 2.0 4.5 6.0 Fig.8 t THL / tTLH output transition time 110 ns 2.0 4.5 6.0 Fig.8 t W nA0 pulse width LOW 100 120 ns 2.0 4.5 6.0 Fig.8 t W nA1 pulse width HIGH 100 120 ns 2.0 4.5 6.0 Fig.8 t W nR D pulse width LOW 100 120 ns 2.0 4.5 6.0 Fig.8 t W nQ, nQ pulse width HIGH or LOW R t= 10 kΩ ; C t= 0.1µF trem removal time R D to nA0,n A1 ns 2.0 4.5 6.0 Fig.8
Philips Semiconductors Product specification Dual retriggerable precision monostable multivibrator 74HC/HCT4538 NON-STANDARD DC CHARACTERISTICS FOR 74HC Voltages are referenced to GND (ground = 0 V) Note 1. This measurement can only be carried out after a trigger pulse is applied. trt retrigger time nA0,n A1 455+X 80+X 55+X ns 2.0 4.5 6.0 Fig.8 X=C EXT / (4.5 × VCC ) R EXT external timing resistor 1000 1000 kΩ 2.0 5.0 C EXT external timing capacitor no limits pF 5.0 SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) VI (V) OTHER +25 −40 to+85 −40 to+125 ±II input leakage current nRC EXT or GND V CC or GND; note 1 SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) OTHER+25 −40 to+85 −40 to+125
Philips Semiconductors Product specification Dual retriggerable precision monostable multivibrator 74HC/HCT4538 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI Note to HCT types The value of additional quiescent supply current (ΔICC ) for a unit load of 1 is given in the family specifications. To determineΔICC per input, multiply this value by the unit load coefficient shown in the table below. AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr = tf= 6 ns; CL = 50 pF INPUT UNIT LOAD COEFFICIENT nA0,n A1 nR D 0.50 0.65 SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) OTHER +25 −40 to+85 −40 to+125 tPLH propagation delay nA0,n A1 to nQ 35 60 75 90 ns 4.5 Fig.8 tPHL propagation delay nA0,n A1 to nQ 35 60 75 90 ns 4.5 Fig.8 tPHL propagation delay nR D to nQ 35 60 75 90 ns 4.5 Fig.8 tPLH propagation delay nR D to nQ 35 60 75 90 ns 4.5 Fig.8 tTHL / tTLH output transition time 7 15 19 21 ns 4.5 Fig.8 tW nA0 pulse width LOW 20 11 25 30 ns 4.5 Fig.8 tW nA1 pulse width HIGH 16 5 20 24 ns 4.5 Fig.8 tW nR D pulse width LOW 20 11 25 30 ns 4.5 Fig.8 tW nQ, nQ pulse width HIGH or LOW C t= 0.1µF trem removal time R D to nA0, nA1 7 2 9 11 ns 4.5 Fig.8 trt retrigger time nA0,n A1 − 80+X −− ns 4.5 Fig.8 X=C EXT / (4.5× VCC ) R EXT external timing resistor 2 1000 k Ω 5.0 C EXT external timing capacitor no limits pF 5.0
Philips Semiconductors Product specification Dual retriggerable precision monostable multivibrator 74HC/HCT4538 NON-STANDARD DC CHARACTERISTICS FOR 74HCT Voltages are referenced to GND (ground = 0 V) Note 1. This measurement can only be carried out after a trigger pulse is applied. AC WAVEFORMS SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) VI (V) OTHER +25 −40 to+85 −40 to+125 ±II input leakage current nRC EXT or GND V CC or GND; note 1 Fig.8 Waveforms showing the input (nA1,nA0,nR D ) to output (nQ, nQ) propagation delays, the output transition times, the input and output pulse widths, the removal time from direct reset (nR D ) to input (nA1,nA0), and the input retrigger time. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V.
Philips Semiconductors Product specification Dual retriggerable precision monostable multivibrator 74HC/HCT4538
APPLICATION INFORMATION
Fig.9 Retriggerable monostable circuitry. (a) rising-edge triggered; (b) falling-edge triggered. (a) (b) Fig.10 Non-retriggerable monostable circuitry. (a) rising-edge triggered; (b) falling-edge triggered. (a) (b)
Philips Semiconductors Product specification Dual retriggerable precision monostable multivibrator 74HC/HCT4538 Fig.11 Power-down protection circuit. Power-down considerations A large capacitor (CX) may cause problems when powering-down the monostable due to the energy stored in this capacitor. When a system containing this device is powered-down or a rapid decrease of V CC to zero occurs, the monostable may sustain damage, due to the capacitor discharging through the input protection diodes. To avoid this possibility, use a damping diode (D X) preferably a germanium or Schottky type diode able to withstand large current surges and connect as shown in Fig.11. Fig.12 Typical pulse width accuracy versus external capacitance; VCC = 4.5 V; Tamb = 25°C. Fig.13 Typical pulse width accuracy versus external resistance; VCC = 4.5 V; Tamb = 25°C.
Philips Semiconductors Product specification Dual retriggerable precision monostable multivibrator 74HC/HCT4538 Fig.14 Typical pulse width accuracy versus external capacitance; REXT = 10 kΩ ;VCC = 4.5 V; Tamb = 25°C. Fig.15 Typical pulse width accuracy versus power supply; CEXT = 1 nF; Tamb = 25°C. Fig.16 Typical pulse width accuracy versus power supply; CEXT = 100 nF; Tamb = 25°C.
Philips Semiconductors Product specification Dual retriggerable precision monostable multivibrator 74HC/HCT4538 PACKAGE OUTLINES See “74HC/HCT/HCU/HCMOS Logic Package Outlines”. Fig.17 Typical pulse width accuracy versus temperature; CEXT = 1 nF; VCC = 4.5 V. Fig.18 Typical pulse width accuracy versus temperature; CEXT =1 µF; VCC = 4.5 V.