74HC4511 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 12

Technical content

Product specification File under Integrated Circuits, IC06 December 1990 INTEGRATED CIRCUITS 74HC/HCT4511 BCD to 7-segment latch/decoder/driver For a complete data sheet, please also download:

  • The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines

Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver 74HC/HCT4511

FEATURES

  • Latch storage of BCD inputs
  • Blanking input
  • Lamp test input
  • Driving common cathode LED displays
  • Guaranteed 10 mA drive capability per output
  • Output capability: non-standard
  • ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT4511 are high-speed Si-gate CMOS devices and are pin compatible with “4511” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4511 are BCD to 7-segment latch/decoder/drivers with four address inputs (D 1 to D4), an active LOW latch enable input (LE), an active LOW ripple blanking input (BI), an active LOW lamp test input (LT), and seven active HIGH segment outputs (Qa to Qg). When LE is LOW, the state of the segment outputs (Qa to Q g) is determined by the data on D1 to D4. When LE goes HIGH, the last data present on D1 to D4 are stored in the latches and the segment outputs remain stable. When LT is LOW, all the segment outputs are HIGH independent of all other input conditions. WithLT HIGH, a LOW on BI forces all segment outputs LOW. The inputsLT and BI do not affect the latch circuit.

APPLICATIONS

  • Driving LED displays
  • Driving incandescent displays
  • Driving fluorescent displays
  • Driving LCD displays
  • Driving gas discharge displays QUICK REFERENCE DATA GND = 0 V; Tamb =2 5°C; tr =tf= 6 ns Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD =C PD × VCC 2 × fi+∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC 2 × fo) = sum of outputs C L = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI= GND to VCC For HCT the condition is VI= GND to VCC − 1.5 V SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPHL / tPLH propagation delay C L = 15 pF; VCC =5 V D n to Qn 24 24 ns LE to Qn 23 24 ns BI to Qn 19 20 ns LT to Qn 12 13 ns C I input capacitance 3.5 3.5 pF C PD power dissipation capacitance per latch notes 1 and 2 64 64 pF

Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver 74HC/HCT4511

ORDERING INFORMATION

See “74HC/HCT/HCU/HCMOS Logic Package Information”. PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION

3 LT lamp test input (active LOW)

4 BI ripple blanking input (active LOW)

5 LE latch enable input (active LOW)

7, 1, 2, 6 D 1 to D4 BCD address inputs

8 GND ground (0 V)

13, 12, 11, 10, 9, 15, 14 Q a to Qg segments outputs

16 V CC positive supply voltage

Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.

Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver 74HC/HCT4511 FUNCTION TABLE Note 1. Depends upon the BCD-code applied during the LOW-to-HIGH transition ofLE. H = HIGH voltage level L = LOW voltage level X = don’t care INPUTS OUTPUTS DISPLAY LE BI LTD 4 D 3 D 2 D 1 Q a Q b Q c Q d Q e Q f Q g X X LX X XX HHHHH H H8 X L H X X X X LLLLL L L blank L L L L H H H H H H H H L L L L L L L L L L H H L H L H H L H H H H H H H H L H H L H H H L H L H L L L L L H H L L L L H H H H H H H H L L L L H H H H L L H H L H L H L H L H H L L H H H H H L H H L L L H L H H H L H H H L L L L L H H H H H H H H H H H H L L L L L L H H L H L H H H L L H H L L H H L L H L L L H L L L H H L L H H L L blank blank L L L L H H H H H H H H H H H H H H H H L L H H L H L H L L L L L L L L L L L L L L L L L L L L L L L L L L L L blank blank blank blank HHHXXX X (1) (1) Fig.4 Functional diagram.

Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver 74HC/HCT4511 Fig.5 Logic diagram. Fig.6 Segment designation. Fig.7 Display.

Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver 74HC/HCT4511 DC CHARACTERISTICS FOR 74HC For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard, excepting VOH which is given below ICC category: MSI Non-standard DC characteristics for 74HC Voltages are referenced to GND (ground = 0 V) SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) VI −IO (mA)+25 −40 to+85 −40 to+125 VOH HIGH level output voltage 3.98 3.60 3.84 3.35 3.70 3.10 V 4.5 V IH or VIL 7.5 10.0 V OH HIGH level output voltage 5.60 5.48 4.80 5.45 5.34 4.50 5.35 5.20 4.20 V 6.0 V IH or VIL 7.5 10.0 15.0

Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver 74HC/HCT4511 AC CHARACTERISTICS FOR 74HC GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay D n to Qn 300 375 450 ns 2.0 4.5 6.0 Fig.8 t PHL / tPLH propagation delay LE to Qn 270 330 405 ns 2.0 4.5 6.0 Fig.9 t PHL / tPLH propagation delay BI to Qn 220 275 330 ns 2.0 4.5 6.0 Fig.10 t PHL / tPLH propagation delay LT to Qn 150 190 225 ns 2.0 4.5 6.0 Fig.8 t THL / tTLH output transition time 19 110 ns 2.0 4.5 6.0 Figs 8, 9 and t W latch enable pulse width LOW 100 120 ns 2.0 4.5 6.0 Fig.9 t su set-up time D n toLE ns 2.0 4.5 6.0 Fig.11 t h hold time D n toLE −11 ns 2.0 4.5 6.0 Fig.11

Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver 74HC/HCT4511 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard, excepting VOH which is given below ICC category: MSI Non-standard DC characteristics for 74HCT Voltages are referenced to GND (ground = 0 V) Note to HCT types The value of additional quiescent supply current (ΔICC ) for a unit load of 1 is given in the family specifications. To determineΔICC per input, multiply this value by the unit load coefficient shown in the table below. SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) VI −IO (mA)+25 −40 to+85 −40 to+125 VOH HIGH level output voltage 3.98 3.60 3.84 3.35 3.70 3.10 V 4.5 V IH or VIL 7.5 10.0 INPUT UNIT LOAD COEFFICIENT LT,LE BI, Dn 1.50 0.30

Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver 74HC/HCT4511 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay D n to Qn 28 60 75 90 ns 4.5 Fig.8 tPHL / tPLH propagation delay LE to Qn 27 54 68 81 ns 4.5 Fig.9 tPHL / tPLH propagation delay BI to Qn 23 44 55 66 ns 4.5 Fig.10 tPHL / tPLH propagation delay LT to Qn 16 30 38 45 ns 4.5 Fig.8 tTHL / tTLH output transition time 7 15 19 22 ns 4.5 Figs 8, 9 and tW latch enable pulse width LOW 16 5 20 24 ns 4.5 Fig.9 tsu set-up time D n toLE 12 5 15 18 ns 4.5 Fig.11 th hold time D n toLE 0 −4 0 0 ns 4.5 Fig.11

Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver 74HC/HCT4511 AC WAVEFORMS Fig.8 Waveforms showing the input (Dn,LT) to output (Qn) propagation delays and the output transition times. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.9 Waveforms showing the input (LE) to output (Qn) propagation delays and the latch enable pulse width. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.10 Waveforms showing the input (BI) to output (Qn) propagation delays. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.11 Waveforms showing the data set-up and hold times for Dn input toLE input. The shaded areas indicate when the input is permitted to change for predictable output performance. (1) HC : V M = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V.

Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver 74HC/HCT4511 APPLICATION DIAGRAMS Fig.12 Connection to common cathode LED display readout. Fig.13 Connection to common anode LED display readout. Fig.14 Connection to incandescent display readout. (1) A filament pre-warm resistor to reduce thermal shock and to increase effective cold resistance of the filament is recommended. Fig.15 Connection to fluorescent display readout. Fig.16 Connection to gas discharge display readout. Fig.17 Connection to LCD display readout. (Direct DC drive is not recommended as it can shorten the life of LCD displays).

Philips Semiconductors Product specification BCD to 7-segment latch/decoder/driver 74HC/HCT4511 PACKAGE OUTLINES See “74HC/HCT/HCU/HCMOS Logic Package Outlines”.