74HC4353 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 16

Technical content

Product specification File under Integrated Circuits, IC06 December 1990 INTEGRATED CIRCUITS 74HC/HCT4353 Triple 2-channel analog multiplexer/demultiplexer with latch For a complete data sheet, please also download:

  • The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines

Philips Semiconductors Product specification Triple 2-channel analog multiplexer/demultiplexer with latch 74HC/HCT4353

FEATURES

  • Wide analog input voltage range:± 5 V
  • Low “ON” resistance: 80 Ω (typ.) at VCC − VEE = 4.5 V 70 Ω (typ.) at VCC − VEE = 6.0 V 60 Ω (typ.) at VCC − VEE = 9.0 V
  • Logic level translation: to enable 5 V logic to communicate with± 5 V analog signals
  • Typical “break before make” built in
  • Address latches provided
  • Output capability: non-standard
  • ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT4353 are high-speed Si-gate CMOS devices. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4353 are triple 2-channel analog multiplexers/demultiplexers with two common enable inputs ( E1 and E2) and a latch enable input (LE). Each multiplexer has two independent inputs/outputs (nY0 and nY1), a common input/output (nZ) and select inputs (S1 to S3). Each multiplexer/demultiplexer contains two bidirectional analog switches, each with one side connected to an independent input/output (nY 0 and nY1) and the other side connected to a common input/output (nZ). WithE1 LOW and E 2 HIGH, one of the two switches is selected (low impedance ON-state) by S1 to S3. The data at the select inputs may be latched by using the active LOW latch enable input ( LE). WhenLE is HIGH, the latch is transparent. When either of the two enable inputs, E1 (active LOW) and E2 (active HIGH), is inactive, all analog switches are turned off. VCC and GND are the supply voltage pins for the digital control inputs (S1 to S3,LE,E1 and E2). The VCC to GND The analog inputs/outputs (nY 0 and nY1, and nZ) can swing between VCC as a positive limit and VEE as a negative limit. VCC − VEE may not exceed 10.0 V. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically ground). QUICK REFERENCE DATA VEE = GND = 0 V; Tamb = 25°C; tr = tf= 6 ns SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPZH / tPZL turn “ON” timeE1,E2 or Sn to Vos C L = 50 pF; RL =1 kΩ ; VCC = 5 V 29 21 ns tPHZ / tPLZ turn “OFF” timeE1,E2 or Sn to Vos 20 22 ns C I input capacitance 3.5 3.5 pF C PD power dissipation capacitance per switch notes 1 and 2 23 23 pF C S max. switch capacitance independent (Y) 5 5 pF common (Z) 8 8 pF Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD = C PD × VCC 2 × fi+ ∑ {(CL +C S)× VCC 2 × fo} where: fi = input frequency in MHz C L = output load capacitance in pF fo = output frequency in MHz C S = max. switch capacitance in pF ∑ {(CL ×C S)× VCC 2 × fo} = sum of outputs VCC = supply voltage in V 2. For HC the condition is VI= GND to VCC For HCT the condition is VI= GND to VCC − 1.5 V

ORDERING INFORMATION

See “74HC/HCT/HCU/HCMOS Logic Package Information”.

Philips Semiconductors Product specification Triple 2-channel analog multiplexer/demultiplexer with latch 74HC/HCT4353 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 2, 1 2Y 0,2 Y1 independent inputs/outputs 5 3Z common input/output 6, 4 3Y 0,3 Y1 independent inputs/outputs 3, 14 n.c. not connected E1 enable input (active LOW) 8E 2 enable input (active HIGH) 9V EE negative supply voltage

10 GND ground (0 V)

LE latch enable input (active LOW) 15, 13, 12 S 1 to S3 select inputs 16, 17 1Y 0,1 Y1 independent inputs/outputs 18 1Z common input/output 19 2Z common input/output 20 V CC positive supply voltage Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.

Philips Semiconductors Product specification Triple 2-channel analog multiplexer/demultiplexer with latch 74HC/HCT4353 FUNCTION TABLE Notes 1. Last selected channel “ON”. 2. Selected channels latched. H = HIGH voltage level L = LOW voltage level X = don’t care ↓ = HIGH-to-LOW LE transition

APPLICATIONS

  • Analog multiplexing and demultiplexing
  • Digital multiplexing and demultiplexing
  • Signal gating INPUTS CHANNEL ONE1 E2 LE S n H X H L X X X X none none L L H H H H L H nY0 − nZ nY1 − nZ L X H X L X X (1) (2) Fig.4 Functional diagram. Fig.5 Schematic diagram (one switch).

Philips Semiconductors Product specification Triple 2-channel analog multiplexer/demultiplexer with latch 74HC/HCT4353 RATINGS Limiting values in accordance with the Absolute Maximum System (IEC 134) Voltages are referenced to VEE = GND (ground = 0 V) Note to ratings 1. To avoid drawing VCC current out of terminals nZ, when switch current flows in terminals nYn, the voltage drop across the bidirectional switch must not exceed 0.4 V. If the switch current flows into terminals nZ, no VCC current will flow out of terminals nYn. In this case there is no limit for the voltage drop across the switch, but the voltages at nYn and nZ may not exceed VCC or VEE . RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER MIN. MAX. UNIT CONDITIONS VCC DC supply voltage −0.5 +11.0 V ±IIK DC digital input diode current 20 mA for V I<− 0.5 V or VI > VCC + 0.5 V ±ISK DC switch diode current 20 mA for V S <− 0.5 V or VS > VCC + 0.5 V ±IS DC switch current 25 mA for −0.5 V< VS < VCC + 0.5 V ±IEE DC V EE current 20 mA ±ICC ; ±IGND DC V CC or GND current 50 mA Tstg storage temperature range −65 +150 °C Ptot power dissipation per package for temperature range: −40 to +125°C 74HC/HCT plastic DIL 750 mW above +70 °C: derate linearly with 12 mW/K plastic mini-pack (SO) 500 mW above +70 °C: derate linearly with 8 mW/K PS power dissipation per switch 100 mW SYMBOL PARAMETER 74HC 74HCT UNIT CONDITIONS VI DC input voltage range GND V CC GND V CC V VS DC switch voltage range V EE VCC VEE VCC V Tamb operating ambient temperature range−40 +85 −40 +85 °C see DC and AC CHARACTER- ISTICS T amb operating ambient temperature range−40 +125 −40 +125 °C tr,tf input rise and fall times 6.0 1000 500 400 250 6.0 500 ns V CC = 2.0 V VCC = 4.5 V VCC = 6.0 V VCC = 10.0 V

Philips Semiconductors Product specification Triple 2-channel analog multiplexer/demultiplexer with latch 74HC/HCT4353 Fig.6 Guaranteed operating area as a function of the supply voltages for 74HC4353. handbook, halfpage10 02468 1 0 VCC - VEE (V) VCC - GND (V) MBA334 operating area Fig.7 Guaranteed operating area as a function of the supply voltages for 74HCT4353. DC CHARACTERISTICS FOR 74HC/HCT For 74HC: V CC − GND or VCC − VEE = 2.0, 4.5, 6.0 and 9.0 V Notes to DC characteristics 1. At supply voltages (VCC − VEE ) approaching 2.0 V the analog switch ON-resistance becomes extremely non-linear. There it is recommended that these devices be used to transmit digital signals only, when using these supply voltages. 2. For test circuit measuring R ON see Fig.8. SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC/HCT VCC (V) VEE (V) IS (µA) Vis VI+25 −40 to +85 −40 to +125 R ON ON resistance (peak) 100 180 160 130 225 200 165 270 240 195 Ω Ω Ω Ω 2.0 4.5 6.0 4.5 −4.5 100 1000 1000 1000 VCC to VEE VIN or V IL R ON ON resistance (rail) 150 140 120 105 175 150 130 210 180 160 Ω Ω Ω Ω 2.0 4.5 6.0 4.5 −4.5 100 1000 1000 1000 VEE VIH or VIL R ON ON resistance 150 160 140 120 200 175 150 240 210 180 Ω Ω Ω Ω 2.0 4.5 6.0 4.5 −4.5 100 1000 1000 1000 VCC VIH or VIL ΔR ON maximum ΔON resistance between any two channels Ω Ω Ω Ω 2.0 4.5 6.0 4.5 −4.5 V CC to VEE VIH or V IL

Philips Semiconductors Product specification Triple 2-channel analog multiplexer/demultiplexer with latch 74HC/HCT4353 DC CHARACTERISTICS FOR 74HC Voltages are referenced to GND (ground = 0 V) SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) VEE (V) VI OTHER+25 −40 to +85 −40 to +125 VIH HIGH level input voltage 1.5 3.15 4.2 6.3 1.2 2.4 3.2 4.7 1.5 3.15 4.2 6.3 1.5 3.15 4.2 6.3 V 2.0 4.5 6.0 9.0 V IL LOW level input voltage 0.8 2.1 2.8 4.3 0.5 1.35 1.8 2.7 0.5 1.35 1.8 2.7 0.5 1.35 1.8 2.7 V 2.0 4.5 6.0 9.0 I input leakage current 0.1 0.2 1.0 2.0 1.0 2.0 µA 6.0 10.0 VCC or GND ±IS analog switch OFF-state current per channel 0.1 1.0 1.0 µA 10.0 0V IH or VIL VS = VCC − VEE (see Fig.10) ±IS analog switch OFF-state current all channels 0.1 1.0 1.0 µA 10.0 0V IH or VIL VS = VCC − VEE (see Fig.10) ±IS analog switch ON-state current 0.1 1.0 1.0 µA 10.0 0V IH or VIL VS = VCC − VEE (see Fig.11) ICC quiescent supply current 8.0 16.0 80.0 160.0 160.0 320.0 µA 6.0 10.0 VCC or GND Vis=V EE or VCC ;Vos = VCC or VEE

Philips Semiconductors Product specification Triple 2-channel analog multiplexer/demultiplexer with latch 74HC/HCT4353 AC CHARACTERISTICS FOR 74HC GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) VEE (V) OTHER+25 −40 to +85 −40 to +125 tPHL / tPLH propagation delay Visto Vos ns 2.0 4.5 6.0 4.5 −4.5 R L = ∞ ; C L = 50 pF (see Fig.18) tPZH / tPZL turn “ON” time E1;E2 to Vos 250 315 375 ns 2.0 4.5 6.0 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.19) tPZH / tPZL turn “ON” time LE to Vos 200 250 300 ns 2.0 4.5 6.0 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.19) tPZH / tPZL turn “ON” time Sn to Vos 225 280 340 ns 2.0 4.5 6.0 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.19) tPHZ / tPLZ turn “OFF” time E1;E2 to Vos 250 315 375 ns 2.0 4.5 6.0 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.19) tPHZ / tPLZ turn “OFF” time Sn to Vos;LE to Vos 200 250 300 ns 2.0 4.5 6.0 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.19) tsu set-up time Sn toLE 60 ns 2.0 4.5 6.0 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.20) th hold time Sn toLE 5 ns 2.0 4.5 6.0 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.20) tW LE minimum pulse width HIGH 100 120 ns 2.0 4.5 6.0 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.20)

Philips Semiconductors Product specification Triple 2-channel analog multiplexer/demultiplexer with latch 74HC/HCT4353 DC CHARACTERISTICS FOR 74HCT Voltages are referenced to GND (ground = 0 V) Note to HCT types 1. The value of additional quiescent supply current (ΔICC ) for a unit load of 1 is given here. To determineΔICC per input, multiply this value by the unit load coefficient shown in the table below. SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) VEE (V) VI OTHER+25 −40 to +85 −40 to +125 VIH HIGH level input voltage to 5.5 V IL LOW level input voltage to 5.5 I input leakage current 0.1 1.0 1.0 µA 5.5 0 VCC or GND ±IS analog switch OFF-state current per channel 0.1 1.0 1.0 µA 10.0 0V IH or VIL VS = VCC − VEE Fig.10 ±IS analog switch OFF-state current all channels 0.1 1.0 1.0 µA 10.0 0V IH or VIL VS = VCC − VEE Fig.10 ±IS analog switch ON-state current 0.1 1.0 1.0 µA 10.0 0V IH or VIL VS = VCC − VEE Fig.11 ICC quiescent supply current 8.0 16.0 80.0 160.0 160.0 320.0 µA 5.5 5.0 −5.0 VCC or GND Vis=V EE or VCC ; Vos = VCC or VEE ΔICC additional quiescent supply current per input pin for unit load coefficient is 1 (note 1) 100 360 450 490 µA 4.5 to 5.5 VCC −2.1 V other inputs at V CC or GND INPUT UNIT LOAD COEFFICIENT E1,E2 Sn LE 0.50 0.50 1.5

Philips Semiconductors Product specification Triple 2-channel analog multiplexer/demultiplexer with latch 74HC/HCT4353 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) VEE (V) OTHER+25 −40 to +85 −40 to +125 tPHL / tPLH propagation delay Visto Vos ns 4.5 4.5 −4.5 R L = ∞ ; C L = 50 pF (see Fig.18) tPZH / tPZL turn “ON” time E1 to Vos ns 4.5 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.19) tPZH / tPZL turn “ON” time E2 to Vos ns 4.5 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.19) tPZH / tPZL turn “ON” time LE to Vos ns 4.5 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.19) tPZH / tPZL turn “ON” time Sn to Vos ns 4.5 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.19) tPHZ / tPLZ turn “OFF” time E1 to Vos ns 4.5 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.19) tPHZ / tPLZ turn “OFF” time E2 to Vos ns 4.5 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.19) tPHZ / tPLZ turn “OFF” time LE to Vos ns 4.5 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.19) tPHZ / tPLZ turn “OFF” time Sn to Vos ns 4.5 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.19) tsu set-up time Sn toLE ns 4.5 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.20) th hold time Sn toLE ns 4.5 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.20) tW LE minimum pulse width HIGH ns 4.5 4.5 −4.5 R L =1k Ω ; C L = 50 pF (see Fig.20)

Philips Semiconductors Product specification Triple 2-channel analog multiplexer/demultiplexer with latch 74HC/HCT4353 Fig.8 Test circuit for measuring RON . Fig.9 Typical RON as a function of input voltage Visfor Vis= 0 to VCC − VEE . Fig.10 Test circuit for measuring OFF-state current. Fig.11 Test circuit for measuring ON-state current.

Philips Semiconductors Product specification Triple 2-channel analog multiplexer/demultiplexer with latch 74HC/HCT4353 ADDITIONAL AC CHARACTERISTICS FOR 74HC/HCT Recommended conditions and typical values GND = 0 V; Tamb =2 5°C Notes to the AC characteristics 1. Adjust input voltage Visto 0 dBm level (0 dBm = 1 mW into 600Ω ). 2. Adjust input voltage Visto 0 dBm level at Vos for 1 MHz (0 dBm = 1 mW into 50Ω ). General note Visis the input voltage at an nYn or nZ terminal, whichever is assigned as an input. Vos is the output voltage at an nYn or nZ terminal, whichever is assigned as an output. SYMBOL PARAMETER typ. UNIT VCC (V) VEE (V) Vis(p-p) (V) CONDITIONS sine-wave distortion f = 1 kHz 0.04 0.02 2.25 4.5 −2.25 −4.5 4.0 8.0 R L = 10 kΩ ;C L = 50 pF (see Fig.14) sine-wave distortion f = 10 kHz 0.12 0.06 2.25 4.5 −2.25 −4.5 4.0 8.0 R L = 10 kΩ ;C L = 50 pF (see Fig.14) switch “OFF” signal feed-through −50 −50 dB dB 2.25 4.5 −2.25 −4.5 note 1 R L = 600Ω ;C L = 50 pF f = 1 MHz (see Figs 12 and 15) crosstalk between any two switches/ multiplexers −60 −60 dB dB 2.25 4.5 −2.25 −4.5 note 1 R L = 600Ω ;C L = 50 pF; f = 1 MHz (see Fig.16) V(p−p) crosstalk voltage between control and any switch (peak-to-peak value) 110 220 mV mV 4.5 4.5 −4.5 R L = 600Ω ;C L = 50 pF; f = 1 MHz (E1,E2 or Sn, square-wave between V CC and GND, tr =tf= 6 ns) (see Fig.17) fmax minimum frequency response (−3dB) 160 170 MHz MHz 2.25 4.5 −2.25 −4.5 note 2 R L =5 0Ω ;C L = 10 pF (see Figs 13 and 14) C S maximum switch capacitance independent (Y) common (Z) pF pF Fig.12 Typical switch “OFF” signal feed-through as a function of frequency. Test conditions: VCC = 4.5 V; GND = 0 V; VEE = − 4.5 V; R L =5 0Ω ;R source=1 kΩ .

Philips Semiconductors Product specification Triple 2-channel analog multiplexer/demultiplexer with latch 74HC/HCT4353 Fig.13 Typical frequency response. Test conditions: VCC = 4.5 V; GND = 0 V; VEE = − 4.5 V; R L =5 0Ω ;R source=1 kΩ . Fig.14 Test circuit for measuring sine-wave distortion and minimum frequency response. Fig.15 Test circuit for measuring switch “OFF” signal feed-through. Fig.16 Test circuits for measuring crosstalk between any two switches/multiplexers. (a) = channel ON condition (b) channel OFF condition. Fig.17 Test circuit for measuring crosstalk between control and any switch. The crosstalk is defined as follows (oscilloscope output):

Philips Semiconductors Product specification Triple 2-channel analog multiplexer/demultiplexer with latch 74HC/HCT4353 AC WAVEFORMS Fig.18 Waveforms showing the input (Vis)t o output (Vos) propagation delays. Fig.19 Waveforms showing the turn-ON and turn-OFF times. (1) HC : VM = 50%; VI= GND to VCC . HCT : VM = 1.3 V; VI= GND to 3 V. Fig.20 Waveforms showing the set-up and hold times from Sn inputs toLE input, and minimum pulse width ofLE. (1) HC : VM = 50%; VI= GND to VCC . HCT : VM = 1.3 V; VI= GND to 3 V.

Philips Semiconductors Product specification Triple 2-channel analog multiplexer/demultiplexer with latch 74HC/HCT4353 TEST CIRCUIT AND WAVEFORMS Fig.21 Test circuit for measuring AC performance. Conditions TEST SWITCH V is tPZH tPZL tPHZ tPLZ others VEE VCC VEE VCC open VCC VEE VCC VEE pulse FAMILY AMPLITUDE V M tr;tf fmax ; PULSE WIDTH OTHER 74HC V CC 50% < 2 ns 6 ns 74HCT 3.0 V 1.3 V < 2 ns 6 ns C L = load capacitance including jig and probe capacitance (see AC CHARACTERISTICS for values). R T = termination resistance should be equal to the output impedance ZO of the pulse generator. tr =t f= 6 ns; when measuring fmax , there is no constraint on tr, tfwith 50% duty factor. Fig.22 Input pulse definitions. Conditions TEST SWITCH V is tPZH tPZL tPHZ tPLZ others VEE VCC VEE VCC open VCC VEE VCC VEE pulse FAMILY AMPLITUDE V M tr;tf fmax ; PULSE WIDTH OTHER 74HC V CC 50% < 2 ns 6 ns 74HCT 3.0 V 1.3 V < 2 ns 6 ns C L = load capacitance including jig and probe capacitance (see AC CHARACTERISTICS for values). R T = termination resistance should be equal to the output impedance ZO of the pulse generator. tr =t f= 6 ns; when measuring fmax , there is no constraint on tr, tfwith 50% duty factor.

Philips Semiconductors Product specification Triple 2-channel analog multiplexer/demultiplexer with latch 74HC/HCT4353 PACKAGE OUTLINES See “74HC/HCT/HCU/HCMOS Logic Package Outlines”.