TC74HC4050AP_07 TOSHIBA
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 9
Technical content
Features
- High speed: tpd = 9 ns (typ.) at VCC = 5 V
- Low power dissipation: ICC = 1 μA (max) at Ta = 25°C
- High noise immunity: VNIH = VNIL = 28% VCC (min)
- Output Drive Capability: 15 LSTTL loads
- Symmetrical output impedance: |IOH| = IOL = 6 mA (min)
- Balanced propagation delays: tpLH ∼ − tpHL
- Wide operating voltage range: VCC (opr) = 2 V to 6 V
- Pin and function compatible with 4049B/4050B Note: xxxFN (JEDEC SOP) is not available in Japan. TC74HC4049AP, TC74HC4050AP TC74HC4049AF, TC74HC4050AF TC74HC4049AFN, TC74HC4050AFN TC74HC4049AFT, TC74HC4050AFT Weight DIP16-P-300-2.54A : 1.00 g (typ.) SOP16-P-300-1.27A : 0.18 g (typ.) SOL16-P-150-1.27 : 0.13 g (typ.) TSSOP16-P-0044-0.65A : 0.06 g (typ.)
TC74HC4049,4050AP/AF/AFN/AFT 2007-10-01 2 Pin Assignment NC: No connection IEC Logic Symbol Truth Table A Y (4049A) Y (4050A) L H L H L H Input and Output Equivalent Circuit TC74HC4049A TC74HC4050A NC NC 5A 11 16 1 GND 14 1A (top view) TC74HC4050A VCC (top view) TC74HC4049A GND Y 3 Y 2 Y 1 VCC 1 NC NC (3) (7) (5) 2A (9) (2) (6) Y 2 Y 4 (4) (10) Y 3
1 Y 11A
(11) (14) (12) Y 6(15) Y 5 (3) (7) (5)2A (9) (2) (6) (4) (10) 1Y 1A TC74HC4050A (11) (14) (12) 6Y (15) Y VCC GND A VCC GND A Y
TC74HC4049,4050AP/AF/AFN/AFT 2007-10-01 3 Absolute Maximum Ratings (Note 1) Characteristics Symbol Rating Unit Supply voltage range VCC −0.5 to 7 V DC input voltage VIN −0.5 to 18 (Note 2) V DC output voltage VOUT −0.5 to VCC + 0.5 V Input diode current IIK −20 mA Output diode current IOK ±20 mA DC output current IOUT ±35 mA DC VCC/ground current ICC ±75 mA Power dissipation PD 500 (DIP) (Note 3)/180 (SOP/TSSOP) mW Storage temperature Tstg −65 to 150 °C Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: DC input voltage (V IN) specified is measured to GND and is not related to VCC. Recommended operating range is 0 V to 15 V and it is possible to convert logic-levels from 15 V to 5 V or 5 V to 2 V. Note 3: 500 mW in the range of Ta = −40 to 65°C. From Ta = 65 to 85°C a derating factor of −10 mW/°C shall be applied until 300 mW. Operating Ranges (Note) Characteristics Symbol Rating Unit Supply voltage VCC 2 to 6 V Input voltage VIN 0 to 15 V Output voltage VOUT 0 to VCC V Operating temperature Topr −40 to 85 °C Input rise and fall time tr, tf 0 to 1000 (VCC = 2.0 V) 0 to 500 (VCC = 4.5 V) 0 to 400 (VCC = 6.0 V) ns Note: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND.
TC74HC4049,4050AP/AF/AFN/AFT 2007-10-01 4
Electrical Characteristics
Test Condition Ta = 25°C Ta = −40 to 85°C Characteristics Symbol VCC (V) Min Typ. Max Min Max Unit High-level input voltage VIH ⎯ 2.0 4.5 6.0 1.50 3.15 4.20 1.50 3.15 4.20 V Low-level input voltage VIL ⎯ 2.0 4.5 6.0 0.50 1.35 1.80 0.50 1.35 1.80 V IOH = −20 μA 2.0 4.5 6.0 1.9 4.4 5.9 2.0 4.5 6.0 1.9 4.4 5.9 ⎯ High-level output voltage VOH VIN = VIH or VIL IOH = −6 mA IOH = −7.8 mA 4.5 6.0 4.18 5.68 4.31 5.80 4.13 5.63 V IOL = 20 μA 2.0 4.5 6.0 0.0 0.0 0.0 0.1 0.1 0.1 0.1 0.1 0.1 Low-level output voltage VOL VIN = VIH or VIL IOL = 6 mA IOL = 7.8 mA 4.5 6.0 0.17 0.18 0.26 0.26 0.33 0.33 V VIN = VCC or GND 6.0 ⎯ ⎯ ±0.1 ⎯ ±1.0Input leakage current IIN μA Quiescent supply current I CC VIN = VCC or GND 6.0 ⎯ ⎯ 1.0 ⎯ 10.0 μA AC Characteristics (input: tr = tf = 6 ns) Test Condition Ta = 25°C Ta = −40 to 85°C Characteristics Symbol CL (pF) V CC (V) Min Typ. Max Min Max Unit Output transition time tTLH tTHL ⎯ 50 2.0 4.5 6.0 ns 2.0 4.5 6.0 Propagation delay time tpLH tpHL 150 2.0 4.5 6.0 100 145 ns Input capacitance C IN ⎯ ⎯ 5 10 ⎯ 10 pF Power dissipation capacitance CPD (Note) ⎯ 26 ⎯ ⎯ ⎯ pF Note: C PD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPD·VCC·fIN + ICC/6 (per gate)
TC74HC4049,4050AP/AF/AFN/AFT 2007-10-01 5 Package Dimensions Weight: 1.00 g (typ.)
TC74HC4049,4050AP/AF/AFN/AFT 2007-10-01 6 Package Dimensions Weight: 0.18 g (typ.)
TC74HC4049,4050AP/AF/AFN/AFT 2007-10-01 7 Package Dimensions (Note) Note: This package is not available in Japan. Weight: 0.13 g (typ.)
TC74HC4049,4050AP/AF/AFN/AFT 2007-10-01 8 Package Dimensions Weight: 0.06 g (typ.)
TC74HC4049,4050AP/AF/AFN/AFT 2007-10-01 9 RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL
- The information contained herein is subject to change without notice.
- TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
- The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
- The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
- The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
- Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.