74HC4040 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 24

Technical content

  1. General description The 74HC4040; 74HCT4040 are high-speed Si-gate CMOS devices and are pin compatible with the HEF4040B series. They are specified in compliance with JEDEC standard no. 7A. The 74HC4040; 74HCT4040 are 12-stage binary ripple counters with a clock input ( CP), an overriding asynchronous master reset input (MR) and twelve parallel outputs (Q0 to Q11). The counter advances on the HIGH-to-LOW transition of CP. A HIGH on MR clears all counter stages and forces all outputs LOW, independent of the state ofCP. Each counter stage is a static toggle flip-flop. 2. Features ■ Multiple package options ■ Complies with JEDEC standard no. 7A ■ ESD protection: ◆ HBM JESD22-A114-C exceeds 2000 V ◆ MM JESD22-A115-A exceeds 200 V ■ Specified from−40 °Ct o+ 8 5°C and from−40 °C to +125°C 3. Applications ■ Frequency dividing circuits ■ Time delay circuits ■ Control counters 4. Quick reference data 74HC4040; 74HCT4040 12-stage binary ripple counter Rev. 03 — 14 September 2005 Product data sheet Table 1: Quick reference data GND = 0 V; Tamb =2 5°C; tr =tf= 6 ns. Symbol Parameter Conditions Min Typ Max Unit Type 74HC4040 t PHL , tPLH propagation delay CP to Q0 C L = 15 pF; VCC = 5 V - 14 - ns Qn to Qn+1 C L = 15 pF; VCC =5V - 8 - n s

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 2 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter [1] C PD is used to determine the dynamic power dissipation (PD inµW): PD =C PD × VCC 2 × fi+ ∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz; fo = output frequency in MHz; ∑ (CL × VCC 2 × fo) = sum of outputs; C L = output load capacitance in pF; VCC = supply voltage in V. 5. Ordering information fmax maximum operating frequency C L = 15 pF; VCC = 5 V - 90 - MHz C i input capacitance - 3.5 - pF C PD power dissipation capacitance VI= GND to VCC -2 0 -p F Type 74HCT4040 tPHL , tPLH propagation delay CP to Q0 C L = 15 pF; VCC = 5 V - 16 - ns Qn to Qn+1 C L = 15 pF; VCC =5V - 8 - n s fmax maximum operating frequency C L = 15 pF; VCC = 5 V - 79 - MHz C i input capacitance - 3.5 - pF C PD power dissipation capacitance VI= GND to VCC − 1.5 V - 20 - pF Table 1: Quick reference data …continued GND = 0 V; Tamb =2 5°C; tr =tf= 6 ns. Symbol Parameter Conditions Min Typ Max Unit Table 2: Ordering information Type number Package Temperature range Name Description Version 74HC4040N −40 °C to +125°C DIP16 plastic dual in-line package; 16 leads (300 mil); long body SOT38-1 74HC4040D −40 °C to +125°C SO16 plastic small outline package; 16 leads; body width 3.9 mm SOT109-1 74HC4040DB −40 °C to +125°C SSOP16 plastic shrink small outline package; 16 leads; body width 5.3 mm SOT338-1 74HC4040PW −40 °C to +125°C TSSOP16 plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1 74HC4040BQ −40 °C to +125°C DHVQFN16 plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 16 terminals; body 2.5× 3.5× 0.85 mm SOT763-1 74HCT4040N −40 °C to +125°C DIP16 plastic dual in-line package; 16 leads (300 mil); long body SOT38-1 74HCT4040D −40 °C to +125°C SO16 plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 3 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter 6. Functional diagram 74HCT4040DB −40 °C to +125°C SSOP16 plastic shrink small outline package; 16 leads; body width 5.3 mm SOT338-1 74HCT4040PW −40 °C to +125°C TSSOP16 plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1 74HCT4040BQ −40 °C to +125°C DHVQFN16 plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 16 terminals; body 2.5× 3.5× 0.85 mm SOT763-1 Table 2: Ordering information …continued Type number Package Temperature range Name Description Version Fig 1. Functional diagram Fig 2. Logic symbol Fig 3. IEC logic symbol 001aad589 12-STAGE COUNTER Q10 Q11 T C DMR CP 001aad585 Q0 9 11 MR 10 CP Q1 7 Q2 6 Q3 5 Q4 3 Q5 2 Q6 4 Q7 13 Q8 12 Q9 14 Q10 15 Q11 1 001aad586

11 CT = 0

+ 10 CTR12 CT 11 1

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 4 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter 7. Pinning information

7.1 Pinning

Fig 4. Logic diagram 001aad588 CP MR FF Q T RD Q FF Q T RD Q FF Q T RD Q FF Q T RD Q FF Q T RD Q FF Q T RD Q FF Q T RD Q10 Q FF Q T RD Q11 Q FF Q T RD Q FF Q T RD Q FF Q T RD Q FF Q T RD Q (1) The substrate is attached to this pad using conductive die attach material. It can not be used as supply pin or input Fig 5. Pin configuration DIP16, SO16, SSOP16 and TSSOP16 Fig 6. Pin configuration DHVQFN16 4040 Q11 V CC Q5 Q10 Q4 Q9 Q6 Q7 Q3 Q8 Q2 MR Q1 CP GND Q0 001aad583 001aad584 4040 Q1 CP Q2 MR Q3 Q8 Q6 Q7 Q4 Q9 Q5 Q10 GND Q11 VCC Transparent top view 7 10 6 11 5 12 4 13 3 14 2 15 terminal 1 index area GND (1)

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 5 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter

7.2 Pin description

  1. Functional description

8.1 Function table

[1] H = HIGH voltage level; L = LOW voltage level; X = don’t care; ↑ = LOW-to-HIGH clock transition; ↓ = HIGH-to-LOW clock transition. Table 3: Pin description Symbol Pin Description Q11 1 output 11 Q5 2 output 5 Q4 3 output 4 Q6 4 output 6 Q3 5 output 3 Q2 6 output 2 Q1 7 output 1 GND 8 ground (0 V) Q0 9 output 0 CP 10 clock input (HIGH-to-LOW, edge-triggered) MR 11 master reset input (active HIGH) Q8 12 output 8 Q7 13 output 7 Q9 14 output 9 Q10 15 output 10 V CC 16 positive supply voltage Table 4: Function table Input Output CP MR Q0 to Q11 ↑ L no change ↓ L count XHL

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 6 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter

8.2 Timing diagram

  1. Limiting values [1] For DIP16 packages: above 70°C, Ptot derates linearly with 12 mW/K. For SO16, SSOP16, TSSOP16 and DHVQFN16 packages, above 70°C, Ptot derates linearly with 8 mW/K. Fig 7. Timing diagram 001aad587 1 2 4 8 16 32 64 128 256 512 1024 2048 4096 CP input MR input Q10 Q11 Table 5: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Max Unit VCC supply voltage −0.5 +7 V IIK input diode current V I< −0.5 V or VI > VCC + 0.5 V - ±20 mA IOK output diode current V I< −0.5 V or VI> VCC + 0.5 V - ±20 mA IO output source or sink current −0.5 V < VO < VCC + 0.5 V - ±25 mA ICC quiescent supply current - ±50 mA IGND ground current - ±50 mA Tstg storage temperature −65 +150 °C Ptot power dissipation T amb =−40 °C to +125°C [1] DIP16 package - 750 mW SO16, SSOP16, TSSOP16 and DHVQFN16 packages - 500 mW

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 7 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter 10. Recommended operating conditions 11. Static characteristics Table 6: Recommended operating conditions Symbol Parameter Conditions Min Typ Max Unit type 74HC4040 V CC supply voltage 2.0 5.0 6.0 V VI input voltage 0 - V CC V VO output voltage 0 - V CC V Tamb ambient temperature see Section11 and12 per device −40 - +125 °C tr, tf input rise and fall times except for Schmitt-trigger inputs VCC = 2.0 V - - 1000 ns VCC = 4.5 V - 6.0 500 ns VCC = 6.0 V - - 400 ns type 74HCT4040 V CC supply voltage 4.5 5.0 5.5 V VI input voltage 0 - V CC V VO output voltage 0 - V CC V Tamb ambient temperature see Section11 and12 per device −40 - +125 °C tr, tf input rise and fall times except for Schmitt-trigger inputs VCC = 2 . 0 V ---n s VCC = 4.5 V - 6.0 500 ns VCC = 6 . 0 V ---n s Table 7: Static characteristics for 74HC4040 Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit Tamb = 25°C VIH HIGH-level input voltage V CC = 2.0 V 1.5 1.2 - V VCC = 4.5 V 3.15 2.4 - V VCC = 6.0 V 4.2 3.2 - V VIL LOW-level input voltage V CC = 2.0 V - 0.8 0.5 V VCC = 4.5 V - 2.1 1.35 V VCC = 6.0 V - 2.8 1.8 V VOH HIGH-level output voltage VI= VIH or VIL IO = −20 µA; VCC = 2.0 V 1.9 2.0 - V IO = −20 µA; VCC = 4.5 V 4.4 4.5 - V IO = −20 µA; VCC = 6.0 V 5.9 6.0 - V IO = −4.0 mA; VCC = 4.5 V 3.98 4.32 - V IO = −5.2 mA; VCC = 6.0 V 5.48 5.81 - V

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 8 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter VOL LOW-level output voltage V I= VIH or VIL IO = 20µA; VCC = 2.0 V - 0 0.1 V IO = 20µA; VCC = 4.5 V - 0 0.1 V IO = 20µA; VCC = 6.0 V - 0 0.1 V IO = 4.0 mA; VCC = 4.5 V - 0.15 0.26 V IO = 5.2 mA; VCC = 6.0 V - 0.16 0.26 V ILl input leakage current V I= VCC or GND; VCC = 6.0 V - - 0.1 µA ICC quiescent supply current V I= VCC or GND; IO = 0 A; VCC = 6.0 V - - 8.0 µA C I input capacitance - 3.5 - pF Tamb =−40 °C to +85°C VIH HIGH-level input voltage V CC = 2.0 V 1.5 - - V VCC = 4.5 V 3.15 - - V VCC = 6.0 V 4.2 - - V VIL LOW-level input voltage V CC = 2.0 V - - 0.5 V VCC = 4.5 V - - 1.35 V VCC = 6.0 V - - 1.8 V VOH HIGH-level output voltage VI= VIH or VIL IO = −20 µA; VCC = 2.0 V 1.9 - - V IO = −20 µA; VCC = 4.5 V 4.4 - - V IO = −20 µA; VCC = 6.0 V 5.9 - - V IO = −4.0 mA; VCC = 4.5 V 3.84 - - V VOL LOW-level output voltage V I= VIH or VIL IO = 20µA; VCC = 2.0 V - - 0.1 V IO = 20µA; VCC = 4.5 V - - 0.1 V IO = 20µA; VCC = 6.0 V - - 0.1 V IO = 4.0 mA; VCC = 4.5 V - - 0.33 V IO = 5.2 mA; VCC = 6.0 V - - 0.33 V ILl input leakage current V I= VCC or GND; VCC = 6.0 V - - 1.0 µA ICC quiescent supply current V I= VCC or GND; IO = 0 A; VCC = 6.0 V - - 80.0 µA Tamb =−40 °C to +125°C VIH HIGH-level input voltage V CC = 2.0 V 1.5 - - V VCC = 4.5 V 3.15 - - V VCC = 6.0 V 4.2 - - V VIL LOW-level input voltage V CC = 2.0 V - - 0.5 V VCC = 4.5 V - - 1.35 V VCC = 6.0 V - - 1.8 V Table 7: Static characteristics for 74HC4040 …continued Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 9 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter VOH HIGH-level output voltage VI= VIH or VIL IO = −20 µA; VCC = 2.0 V 1.9 - - V IO = −20 µA; VCC = 4.5 V 4.4 - - V IO = −20 µA; VCC = 6.0 V 5.9 - - V IO = −4.0 mA; VCC = 4.5 V 3.7 - - V IO = −5.2 mA; VCC = 6.0 V; 5.2 - - V VOL LOW-level output voltage V I= VIH or VIL IO = 20µA; VCC = 2.0 V - - 0.1 V IO = 20µA; VCC = 4.5 V - - 0.1 V IO = 20µA; VCC = 6.0 V - - 0.1 V IO = 4.0 mA; VCC = 4.5 V - - 0.4 V IO = 5.2 mA; VCC = 6.0 V - - 0.4 V ILl input leakage current V I= VCC or GND; VCC = 6.0 V - - 1.0 µA ICC quiescent supply current V I= VCC or GND; IO = 0 A; VCC = 6.0 V - - 160.0 µA Table 7: Static characteristics for 74HC4040 …continued Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit Table 8: Static characteristics for 74HCT4040 Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit Tamb = 25°C VIH HIGH-level input voltage VCC = 4.5 V to 5.5 V 2.0 1.6 - V VIL LOW-level input voltage VCC = 4.5 V to 5.5 V - 1.2 0.8 V VOH HIGH-level output voltage VI= VIH or VIL IO = −20 µA; VCC = 4.5 V 4.4 4.5 - V IO = −4.0 mA; VCC = 4.5 V 3.98 4.32 - V VOL LOW-level output voltage VI= VIH or VIL IO = 20µA; VCC = 4.5 V - 0 0.1 V IO = 4.0 mA; VCC = 4.5 V - 0.15 0.26 V ILl input leakage current V I= VCC or GND; VCC = 5.5 V - - 0.1 µA ICC quiescent supply current VI= VCC or GND; IO = 0 A; VCC = 5.5 V - - 8.0 µA ΔICC additional quiescent supply current VI= VCC − 2.1 V; VCC = 4.5 V to 5.5 V; IO = 0 A CP - 85 306 µA MR - 110 396 µA C I input capacitance - 3.5 - pF Tamb =−40 °C to +85°C VIH HIGH-level input voltage VCC = 4.5 V to 5.5 V 2.0 - - V VIL LOW-level input voltage VCC = 4.5 V to 5.5 V - - 0.8 V

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 10 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter VOH HIGH-level output voltage VI= VIH or VIL IO = −20 µA; VCC = 4.5 V 4.4 - - V IO = −4.0 mA; VCC = 4.5 V 3.84 - - V VOL LOW-level output voltage VI= VIH or VIL IO = 20µA; VCC = 4.5 V - - 0.1 V IO = 4.0 mA; VCC = 4.5 V - - 0.33 V ILl input leakage current V I= VCC or GND; VCC = 5.5 V - - 1.0 µA ICC quiescent supply current VI= VCC or GND; IO = 0 A; VCC = 5.5 V - - 80.0 µA ΔICC additional quiescent supply current VI= VCC − 2.1 V; VCC = 4.5 V to 5.5 V; IO = 0 A CP - - 383 µA MR - - 495 µA Tamb =−40 °C to +125°C VIH HIGH-level input voltage VCC = 4.5 V to 5.5 V 2.0 - - V VIL LOW-level input voltage VCC = 4.5 V to 5.5 V - - 0.8 V VOH HIGH-level output voltage VI= VIH or VIL IO = −20 µA; VCC = 4.5 V 4.4 - - V IO = −4.0 mA; VCC = 4.5 V 3.7 - - V VOL LOW-level output voltage VI= VIH or VIL IO = 20µA; VCC = 4.5 V - - 0.1 V IO = 4.0 mA; VCC = 4.5 V - - 0.4 V ILl input leakage current V I= VCC or GND; VCC = 5.5 V - - 1.0 µA ICC quiescent supply current VI= VCC or GND; IO = 0 A; VCC = 5.5 V - - 160.0 µA ΔICC additional quiescent supply current VI= VCC − 2.1 V; VCC = 4.5 V to 5.5 V; IO =0A CP - - 417 µA MR - - 539 µA Table 8: Static characteristics for 74HCT4040 …continued Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 11 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter 12. Dynamic characteristics Table 9: Dynamic characteristics for type 74HC4040 GND = 0 V; tr = tf = 6 ns. For test circuit seeFigure9. Symbol Parameter Conditions Min Typ Max Unit Tamb = 25°C tPHL , tPLH propagation delayCP to Q0 see Figure8 VCC = 2.0 V; CL = 50 pF - 47 150 ns VCC = 4.5 V; CL = 50 pF - 17 30 ns VCC = 5.0 V; CL =1 5p F - 1 4 - n s VCC = 6.0 V; CL = 50 pF - 14 26 ns propagation delay Qn to Qn+1 see Figure8 VCC = 2.0 V; CL = 50 pF - 28 100 ns VCC = 4.5 V; CL = 50 pF - 10 20 ns VCC = 5.0 V; CL =1 5p F - 8 - n s VCC = 6.0 V; CL =5 0p F - 8 1 7 n s tPHL propagation delay MR to Qn see Figure8 VCC =2.0 V; CL = 50 pF - 61 185 ns VCC = 4.5 V; CL = 50 pF - 22 37 ns VCC = 6.0 V; CL = 50 pF - 18 31 ns tTHL , tTLH output transition time see Figure8 VCC = 2.0 V; CL = 50 pF - 19 75 ns VCC = 4.5 V; CL =5 0p F - 7 1 5 n s VCC = 6.0 V; CL =5 0p F - 6 1 3 n s tW clock pulse width HIGH or LOW seeFigure8 VCC = 2.0 V; CL =5 0p F 8 0 1 4 - n s VCC = 4.5 V; CL =5 0p F 1 6 5 - n s VCC = 6.0 V; CL =5 0p F 1 4 4 - n s master reset pulse width; HIGH seeFigure8 VCC = 2.0 V; CL =5 0p F 8 0 2 2 - n s VCC = 4.5 V; CL =5 0p F 1 6 8 - n s VCC = 6.0 V; CL =5 0p F 1 4 6 - n s trec recovery time MR toCP see Figure8 VCC = 2.0 V; CL =5 0p F 5 0 8 - n s VCC = 4.5 V; CL =5 0p F 1 0 3 - n s VCC = 6.0 V; CL =5 0p F 9 2 - n s fmax maximum operating frequency see Figure8 VCC = 2.0 V; CL = 50 pF 6.0 27 - MHz VCC = 4.5 V; CL =5 0p F 3 0 8 2 - M H z VCC = 5.0 V; CL = 15 pF - 90 - MHz VCC = 6.0 V; CL =5 0p F 3 5 9 8 - M H z C PD power dissipation capacitance - 20 - pF

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 12 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter Tamb =−40 °C to +85°C tPHL , tPLH propagation delayCP to Q0 see Figure8 VCC = 2.0 V; CL = 50 pF - - 190 ns VCC = 4.5 V; CL =5 0p F - - 3 8 n s VCC = 6.0 V; CL =5 0p F - - 3 3 n s propagation delay Qn to Qn+1 see Figure8 VCC = 2.0 V; CL = 50 pF - - 125 ns VCC = 4.5 V; CL =5 0p F - - 2 5 n s VCC = 6.0 V; CL =5 0p F - - 2 1 n s tPHL propagation delay MR to Qn see Figure8 VCC = 2.0 V; CL = 50 pF - - 230 ns VCC = 4.5 V; CL =5 0p F - - 4 6 n s VCC = 6.0 V; CL =5 0p F - - 3 9 n s tTHL , tTLH output transition time see Figure8 VCC = 2.0 V; CL =5 0p F - - 9 5 n s VCC = 4.5 V; CL =5 0p F - - 1 9 n s VCC = 6.0 V; CL =5 0p F - - 1 6 n s tW clock pulse width HIGH or LOW seeFigure8 VCC = 2.0 V; CL = 50 pF 100 - - ns VCC = 4.5 V; CL =5 0p F 2 0 - - n s VCC = 6.0 V; CL =5 0p F 1 7 - - n s master reset pulse width; HIGH seeFigure8 VCC = 2.0 V; CL = 50 pF 100 - - ns VCC = 4.5 V; CL =5 0p F 2 0 - - n s VCC = 6.0 V; CL =5 0p F 1 7 - - n s trec recovery time MR toCP see Figure8 VCC = 2.0 V; CL =5 0p F 6 5 - - n s VCC = 4.5 V; CL =5 0p F 1 3 - - n s VCC = 6.0 V; CL =5 0p F 1 1 - - n s fmax maximum operating frequency see Figure8 VCC = 2.0 V; CL = 50 pF 4.8 - - MHz VCC = 4.5 V; CL =5 0p F 2 4 - - M H z VCC = 6.0 V; CL =5 0p F 2 8 - - M H z Table 9: Dynamic characteristics for type 74HC4040 …continued GND = 0 V; tr = tf = 6 ns. For test circuit seeFigure9. Symbol Parameter Conditions Min Typ Max Unit

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 13 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter [1] C PD is used to determine the dynamic power dissipation (PD inµW): PD =C PD × VCC 2 × fi+ ∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz; fo = output frequency in MHz; ∑ (CL × VCC 2 × fo) = sum of outputs; C L = output load capacitance in pF; VCC = supply voltage in V. Tamb =−40 °C to +125°C tPHL , tPLH propagation delayCP to Q0 see Figure8 VCC = 2.0 V; CL = 50 pF - - 225 ns VCC = 4.5 V; CL =5 0p F - - 4 5 n s VCC = 6.0 V; CL =5 0p F - - 3 8 n s propagation delay Qn to Qn+1 see Figure8 VCC = 2.0 V; CL = 50 pF - - 150 ns VCC = 4.5 V; CL =5 0p F - - 3 0 n s VCC = 6.0 V; CL =5 0p F - - 2 6 n s tPHL propagation delay MR to Qn see Figure8 VCC = 2.0 V; CL = 50 pF - - 280 ns VCC = 4.5 V; CL =5 0p F - - 5 6 n s VCC = 6.0 V; CL =5 0p F - - 4 8 n s tTHL , tTLH output transition time see Figure8 VCC = 2.0 V; CL = 50 pF - - 110 ns VCC = 4.5 V; CL =5 0p F - - 2 2 n s VCC = 6.0 V; CL =5 0p F - - 1 9 n s tW clock pulse width HIGH or LOW seeFigure8 VCC = 2.0 V; CL = 50 pF 120 - - ns VCC = 4.5 V; CL =5 0p F 2 4 - - n s VCC = 6.0 V; CL =5 0p F 2 0 - - n s master reset pulse width; HIGH seeFigure8 VCC = 2.0 V; CL = 50 pF 120 - - ns VCC = 4.5 V; CL =5 0p F 2 4 - - n s VCC = 6.0 V; CL =5 0p F 2 0 - - n s trec recovery time MR toCP see Figure8 VCC = 2.0 V; CL =5 0p F 7 5 - - n s VCC = 4.5 V; CL =5 0p F 1 5 - - n s VCC = 6.0 V; CL =5 0p F 1 3 - - n s fmax maximum operating frequency see Figure8 VCC = 2.0 V; CL = 50 pF 4.0 - - MHz VCC = 4.5 V; CL =5 0p F 2 0 - - M H z VCC = 6.0 V; CL =5 0p F 2 4 - - M H z Table 9: Dynamic characteristics for type 74HC4040 …continued GND = 0 V; tr = tf = 6 ns. For test circuit seeFigure9. Symbol Parameter Conditions Min Typ Max Unit

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 14 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter Table 10: Dynamic characteristics for type 74HCT4040 GND = 0 V; tr = tf = 6 ns. For test circuit seeFigure9. Symbol Parameter Conditions Min Typ Max Unit Tamb = 25°C tPHL , tPLH propagation delayCP to Q0 see Figure8 VCC = 4.5 V; CL = 50 pF - 19 40 ns VCC = 5.0 V; CL = 15 pF - 16 - ns propagation delay Qn to Qn+1 seeFigure8 VCC = 4.5 V; CL = 50 pF - 10 20 ns VCC = 5.0 V; CL = 15 pF - 8 - ns tPHL propagation delay MR to Qn V CC = 4.5 V; CL =5 0p F ; see Figure8; -2 3 4 5 n s tTHL , tTLH output transition time V CC = 4.5 V; CL =5 0p F ; see Figure8; - 7 15 ns tW clock pulse width HIGH or LOW VCC = 4.5 V; CL =5 0p F ; see Figure8; 16 7 - ns master reset pulse width; HIGH VCC = 4.5 V; CL =5 0p F ; see Figure8; 16 6 - ns trec recovery time MR toCP V CC = 4.5 V; CL =5 0p F ; see Figure8; 10 2 - ns fmax maximum operating frequency see Figure8 VCC = 4.5 V; CL =5 0p F 3 0 7 2 - M H z VCC = 5.0 V; CL = 15 pF - 79 - MHz C PD power dissipation capacitance per package [1] -2 0 -p F Tamb =−40 °C to +85°C tPHL , tPLH propagation delayCP to Q0 V CC = 4.5 V; CL =5 0p F ; see Figure8; --5 0 n s propagation delay Qn to Qn+1 VCC = 4.5 V; CL =5 0p F ; see Figure8; --2 5 n s tPHL propagation delay MR to Qn V CC = 4.5 V; CL =5 0p F ; see Figure8; --5 6 n s tTHL , tTLH output transition time V CC = 4.5 V; CL =5 0p F ; see Figure8; --1 9 n s tW clock pulse width HIGH or LOW VCC = 4.5 V; CL =5 0p F ; see Figure8; 20 - - ns master reset pulse width; HIGH VCC = 4.5 V; CL =5 0p F ; see Figure8; 20 - - ns trec recovery time MR toCP V CC = 4.5 V; CL =5 0p F ; see Figure8; 13 - - ns fmax maximum operating frequency VCC = 4.5 V; CL =5 0p F ; see Figure8; 24 - - MHz Tamb =−40 °C to +125°C tPHL , tPLH propagation delayCP to Q0 V CC = 4.5 V; CL =5 0p F ; see Figure8; --6 0 n s propagation delay Qn to Qn+1 VCC = 4.5 V; CL =5 0p F ; see Figure8 --3 0 n s

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 15 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter [1] C PD is used to determine the dynamic power dissipation (PD inµW): PD =C PD × VCC 2 × fi+ ∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz; fo = output frequency in MHz; ∑ (CL × VCC 2 × fo) = sum of outputs; C L = output load capacitance in pF; VCC = supply voltage in V. 13. Waveforms tPHL propagation delay MR to Qn V CC = 4.5 V; CL =5 0p F ; see Figure8 --6 8 n s tTHL , tTLH output transition time V CC = 4.5 V; CL =5 0p F ; see Figure8 --2 2 n s tW clock pulse width HIGH or LOW VCC = 4.5 V; CL =5 0p F ; see Figure8 24 - - ns master reset pulse width; HIGH VCC = 4.5 V; CL =5 0p F ; see Figure8 24 - - ns trec recovery time MR toCP V CC = 4.5 V; CL =5 0p F ; see Figure8 15 - - ns fmax maximum operating frequency VCC = 4.5 V; CL =5 0p F ; see Figure8 20 - - MHz Table 10: Dynamic characteristics for type 74HCT4040 …continued GND = 0 V; tr = tf = 6 ns. For test circuit seeFigure9. Symbol Parameter Conditions Min Typ Max Unit 74HC4040: VM = 50 %; VI= GND to VCC . 74HCT4040: VM = 1.3 V; VI= GND to 3 V. Fig 8. Clock (CP) to output (Qn) propagation delays, clock pulse width, output transition times, maximum clock pulse frequency, master reset (MR) pulse width, master reset to output (Qn) propagation delays and master reset to clock ( CP) removal time. MR input CP input Q0 or Qn output tW tPHL 1/fmax trem VM VI VI VM 001aad590 tPLH tW tTLH tTHL tPHL VM

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 16 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter Definitions for test circuit: C L = load capacitance including jig and probe capacitance (SeeSection12 for the value). R T = termination resistance should be equal to output impedance ZO of the pulse generator. Fig 9. Test circuit mna101 VCC VI VO R T C L PULSE GENERATOR DUT

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 17 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter 14. Package outline Fig 10. Package outline SOT38-1 (DIP16) UNIT A max. 1 2 b1 cE e M HL REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm inches DIMENSIONS (inch dimensions are derived from the original mm dimensions) SOT38-1 99-12-27 03-02-13 A min. A max. b max.wM Ee1 1.40 1.14 0.055 0.045 0.53 0.38 0.32 0.23 21.8 21.4 0.86 0.84 6.48 6.20 0.26 0.24 3.9 3.4 0.15 0.13 0.2542.54 7.62 0.3 8.25 7.80 0.32 0.31 9.5 8.3 0.37 0.33 2.2 0.087 4.7 0.51 3.7 0.15 0.021 0.015 0.013 050G09 MO-001 SC-503-16 M H c (e )1 M E A L seating plane w M e D A 2 Z b E pin 1 index 0 5 10 mm scale Note 1. Plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included. (1) (1)D (1)Z DIP16: plastic dual in-line package; 16 leads (300 mil); long body SOT38-1

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 18 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter Fig 11. Package outline SOT109-1 (SO16) X w M q AA 1 A 2 bp D H E Lp Q detail X E Z e c L v M A (A )3 A y pin 1 index UNIT A max. A 1 A 2 A 3 bp cD (1) E (1) (1)eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm inches 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 10.0 9.8 4.0 3.8 1.27 6.2 5.8 0.7 0.6 0.7 0.3 8 o o 0.25 0.1 DIMENSIONS (inch dimensions are derived from the original mm dimensions) Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.0 0.4 SOT109-1 99-12-27 03-02-19 076E07 MS-012 0.069 0.010 0.004 0.057 0.049 0.01 0.019 0.014 0.0100 0.0075 0.39 0.38 0.16 0.15 0.05 1.05 0.0410.244 0.228 0.028 0.020 0.028 0.0120.01 0.25 0.01 0.0040.039 0.016 0 2.5 5 mm scale SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 19 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter Fig 12. Package outline SOT338-1 (SSOP16) UNIT A 1 A 2 A 3 bp cD (1) E (1) eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.21 0.05 1.80 1.65 0.25 0.38 0.25 0.20 0.09 6.4 6.0 5.4 5.2 0.65 1.257.9 7.6 1.03 0.63 0.9 0.7 1.00 0.55 o o0.130.2 0.1 DIMENSIONS (mm are the original dimensions) Note 1. Plastic or metal protrusions of 0.25 mm maximum per side are not included. SOT338-1 99-12-27 03-02-19 (1) w M bp D H E E Z e c v M A X A y 1 8 16 9 q AA 1 A 2 Lp Q detail X L (A )3 MO-150 pin 1 index 0 2.5 5 mm scale SSOP16: plastic shrink small outline package; 16 leads; body width 5.3 mm SOT338-1 A max.

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 20 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter Fig 13. Package outline SOT403-1 (TSSOP16) UNIT A 1 A 2 A 3 bp cD (1) E (2) (1)eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.40 0.06 o o0.13 0.10.21 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 SOT403-1 MO-153 99-12-27 03-02-18 w M bp D Z e 0.25 16 9 q AA 1 A 2 Lp Q detail X L (A )3 H E E c v M A XA y 0 2.5 5 mm scale TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1 A max. 1.1 pin 1 index

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 21 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter Fig 14. Package outline SOT763-1 (DHVQFN16) terminal 1 index area 0.51 A 1 EhbUNIT ye 0.2 c REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 3.6 3.4 D h 2.15 1.85 2.6 2.4 1.15 0.85 2.50.30 0.18 0.05 0.00 0.05 0.1 DIMENSIONS (mm are the original dimensions) 0.5 0.3 L 0.1 v 0.05 w 0 2.5 5 mm scale SOT763-1 DHVQFN16: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 16 terminals; body 2.5 x 3.5 x 0.85 mm A (1) max. A c detail X yy1 Ce L Eh D h e b 15 10 X D E C B A terminal 1 index area AC C Bv M w M E (1) Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. D (1) 02-10-17 03-01-27

74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 22 of 24 Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter 15. Revision history Table 11: Revision history Document ID Release date Data sheet status Change notice Doc. number Supersedes 74HC_HCT4040_3 20050914 Product data sheet - - 74HC_HCT4040_CNV_2 Modifications: • The format of this data sheet has been redesigned to comply with the new presentation and information standard of Philips Semiconductors

  • Reference to family specifications is replaced by the actual information:Section5 “Ordering information”,Section 7 “Pinning information”,Section 9 “Limiting values”,Section 10 “Recommended operating conditions”,Section 11 “Static characteristics”,Figure 9 “Test circuit”
  • Section 14 “Package outline” (DHVQFN16) added 74HC_HCT4040_CNV_2 19901231 Product specification -- -

Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter 74HC_HCT4040_3 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 14 September 2005 23 of 24 16. Data sheet status [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 17. Definitions Short-form specification —The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 18. Disclaimers Life support —These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes —Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 19. Trademarks Notice —All referenced brands, product names, service names and trademarks are the property of their respective owners. 20. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com Level Data sheet status[1] Product status[2][3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).

© Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 14 September 2005 Document number: 74HC_HCT4040_3 Published in The Netherlands Philips Semiconductors 74HC4040; 74HCT4040 12-stage binary ripple counter 21. Contents