74HC4017 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 12
Technical content
Product specification File under Integrated Circuits, IC06 December 1990 INTEGRATED CIRCUITS 74HC/HCT4017 Johnson decade counter with 10 decoded outputs For a complete data sheet, please also download:
- The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
- The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
- The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
Philips Semiconductors Product specification Johnson decade counter with 10 decoded outputs 74HC/HCT4017
FEATURES
- Output capability: standard
- ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT4017 are high-speed Si-gate CMOS devices and are pin compatible with the “4017” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4017 are 5-stage Johnson decade counters with 10 decoded active HIGH outputs (Q 0 to Q9), an active LOW output from the most significant flip-flop Q 5-9), active HIGH and active LOW clock inputs (CP0 and CP 1) and an overriding asynchronous master reset input (MR). The counter is advanced by either a LOW-to-HIGH transition at CP0 whileCP 1 is LOW or a HIGH-to-LOW transition atCP 1 while CP0 is HIGH (see also function table). When cascading counters, theQ 5-9 output, which is LOW while the counter is in states 5, 6, 7, 8 and 9, can be used to drive the CP 0 input of the next counter. A HIGH on MR resets the counter to zero (Q0 = Q 5-9 = HIGH; Q1 to Q9 = LOW) independent of the clock inputs (CP0 andCP 1). Automatic code correction of the counter is provided by an internal circuit: following any illegal code the counter returns to a proper counting mode within 11 clock pulses. QUICK REFERENCE DATA GND = 0 V; T amb =2 5°C; tr =tf= 6 ns Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD =C PD × VCC 2 × fi+∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC 2 × fo) = sum of outputs C L = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI= GND to VCC For HCT the condition is VI= GND to VCC − 1.5 V
ORDERING INFORMATION
See “74HC/HCT/HCU/HCMOS Logic Package Information”. SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPHL / tPLH propagation delay CP0,CP 1 to Qn C L = 15 pF; VCC = 5 V 2 02 1n s fmax maximum clock frequency 77 67 MHz C I input capacitance 3.5 3.5 pF C PD power dissipation capacitance per package notes 1 and 2 35 36 pF
Philips Semiconductors Product specification Johnson decade counter with 10 decoded outputs 74HC/HCT4017 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 3, 2, 4, 7, 10, 1, 5, 6, 9, 11 Q0 to Q9 decoded outputs
8 GND ground (0 V)
Q 5-9 carry output (active LOW)
13 CP 1 clock input (HIGH-to-LOW, edge-triggered)
14 CP 0 clock input (LOW-to-HIGH, edge-triggered)
15 MR master reset input (active HIGH)
CC positive supply voltage Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.
Philips Semiconductors Product specification Johnson decade counter with 10 decoded outputs 74HC/HCT4017 FUNCTION TABLE Notes 1. H = HIGH voltage level L = LOW voltage level X = don’t care ↑ = LOW-to-HIGH clock transition ↓ = HIGH-to-LOW clock transition MR CP
0 CP 1 OPERATION
HXXQ 0 =Q 5-9 = H; Q1 to Q9 =L L L L L L L H L X H L X H L counter advances counter advances no change no change no change no change Fig.4 Functional diagram.
Philips Semiconductors Product specification Johnson decade counter with 10 decoded outputs 74HC/HCT4017 Fig.5 Logic diagram. Fig.6 Timing diagram.
Philips Semiconductors Product specification Johnson decade counter with 10 decoded outputs 74HC/HCT4017 DC CHARACTERISTICS FOR 74HC For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI
Philips Semiconductors Product specification Johnson decade counter with 10 decoded outputs 74HC/HCT4017 AC CHARACTERISTICS FOR 74HC GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay CP 0 to Qn 230 290 345 ns 2.0 4.5 6.0 Fig.9 t PHL / tPLH propagation delay CP 0 toQ 5-9 230 290 345 ns 2.0 4.5 6.0 Fig.9 t PHL / tPLH propagation delay CP 1 to Qn 250 315 375 ns 2.0 4.5 6.0 Fig.9 t PHL / tPLH propagation delay CP 1 toQ 5-9 250 315 375 ns 2.0 4.5 6.0 Fig.9 t PHL propagation delay MR to Q1−9 230 290 345 ns 2.0 4.5 6.0 Fig.8 t PLH propagation delay MR to Q 5−9, Q0 230 290 345 ns 2.0 4.5 6.0 Fig.8 t THL / tTLH output transition time 110 ns 2.0 4.5 6.0 Fig.9 t W clock pulse width HIGH or LOW 100 120 ns 2.0 4.5 6.0 Fig.8 t W master reset pulse width; HIGH 100 120 ns 2.0 4.5 6.0 Fig.8 t rem removal time MR to CP0,CP 1 −17 ns 2.0 4.5 6.0 Fig.8 t su set-up time CP 1 to CP0; CP 0 toCP 1 ns 2.0 4.5 6.0 Fig.7 t h hold time CP 0 toCP 1; CP 1 toCP 0 ns 2.0 4.5 6.0 Fig.7 f max maximum clock pulse frequency 6.0 4.8 4.0 MHz 2.0 4.5 6.0 Fig.8
Philips Semiconductors Product specification Johnson decade counter with 10 decoded outputs 74HC/HCT4017 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI Note to HCT types The value of additional quiescent supply current (ΔICC ) for a unit load of 1 is given in the family specifications. To determineΔICC per input, multiply this value by the unit load coefficient shown in the table below. INPUT UNIT LOAD COEFFICIENT CP 1 CP 0 MR 0.40 0.25 0.50
Philips Semiconductors Product specification Johnson decade counter with 10 decoded outputs 74HC/HCT4017 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay CP 0 to Qn 25 46 58 69 ns 4.5 Fig.9 tPHL / tPLH propagation delay CP 0 toQ 5-9 25 46 58 69 ns 4.5 Fig.9 tPHL / tPLH propagation delay CP 1 to Qn 25 50 63 75 ns 4.5 Fig.9 tPHL / tPLH propagation delay CP 1 toQ 5-9 25 50 63 75 ns 4.5 Fig.9 tPHL propagation delay MR to Q1−9 22 46 58 69 ns 4.5 Fig.8 tPLH propagation delay MR to Q 5−9, Q0 20 46 58 69 ns 4.5 Fig.8 tTHL / tTLH output transition time 7 15 19 22 ns 4.5 Fig.9 tW clock pulse width HIGH or LOW 16 7 20 24 ns 4.5 Fig.8 tW master reset pulse width; HIGH 16 4 20 24 ns 4.5 Fig.8 trem removal time MR to CP0,CP 1 5 −5 5 5 ns 4.5 Fig.8 tsu set-up time CP 1 to CP0; CP 0 toCP 1 10 −3 13 15 ns 4.5 Fig.7 th hold time CP 0 toCP 1; CP 1 to CP0 10 6 13 15 ns 4.5 Fig.7 fmax maximum clock pulse frequency 30 61 24 20 ns 4.5 Fig.8
Philips Semiconductors Product specification Johnson decade counter with 10 decoded outputs 74HC/HCT4017 AC WAVEFORMS Fig.7 Waveforms showing the hold and set-up times for CP0 toCP 1 andCP 1 to CP0. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.8 Waveforms showing the minimum pulse widths for CP0,CP 1 and MR inputs; the recovery time for MR and the propagation delays for MR to Qn andQ 5-9 outputs. Conditions: CP 1 = LOW while CP0 is triggered on a LOW-to-HIGH transition and CP0 = HIGH, whileCP 1 is triggered on a HIGH-to-LOW transition. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V.
Philips Semiconductors Product specification Johnson decade counter with 10 decoded outputs 74HC/HCT4017 Fig.9 Waveforms showing the propagation delays for CP0,CP 1 to Qn,Q 5-9 outputs and the output transition times. Conditions: CP 1 = LOW while CP0 is triggered on a LOW-to-HIGH transition and CP0 = HIGH, whileCP 1 is triggered on a HIGH-to-LOW transition. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V.