74HC40104 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 8

Technical content

Product specification File under Integrated Circuits, IC06 December 1990 INTEGRATED CIRCUITS 74HC/HCT40104 4-bit bidirectional universal shift register; 3-state For a complete data sheet, please also download:

  • The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines

Philips Semiconductors Product specification 4-bit bidirectional universal shift register; 3-state 74HC/HCT40104

FEATURES

  • Synchronous parallel or serial operating
  • 3-state outputs
  • Output capability: bus driver
  • ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT40104 are high-speed Si-gate CMOS devices and are pin compatible with the “40104” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT40104 are universal shift registers featuring parallel inputs, parallel outputs, shift-right and shift-left serial inputs and 3-state outputs allowing the devices to be used in bus-organized systems. In the parallel-load mode (S 0 and S1 are HIGH), data is loaded into the associated flip-flop and appears at the output after the positive transition of the clock input (CP). During loading, serial data flow is inhibited. Shift-right and shift-left are accomplished synchronously on the positive clock edge with serial data entered at the shift-right (D SR ) and shift-left (DSL) serial inputs, respectively. Clearing the register is accomplished by setting both mode controls (S0 and S1) LOW and clocking the register. When the output enable input (OE) is LOW, all outputs assume the high-impedance OFF-state (Z).

APPLICATIONS

  • Arithmetic unit bus registers
  • Serial/parallel conversion
  • General-purpose register for bus organized systems
  • General-purpose registers QUICK REFERENCE DATA GND = 0 V; T amb =2 5°C; tr =tf= 6 ns Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD =C PD × VCC 2 × fi+∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC 2 × fo) = sum of outputs C L = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI= GND to VCC For HCT the condition is VI= GND to VCC − 1.5 V

ORDERING INFORMATION

See “74HC/HCT/HCU/HCMOS Logic Package Information”. SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPHL / tPLH propagation delay CP to Qn C L = 15 pF; VCC = 5 V 13 15 ns fmax maximum clock frequency 62 57 MHz C I input capacitance 3.5 3.5 pF C PD power dissipation capacitance per package notes 1 and 2 75 75 pF

Philips Semiconductors Product specification 4-bit bidirectional universal shift register; 3-state 74HC/HCT40104 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION

1 OE 3-state output enable input (active HIGH)

2D SR serial data shift-right input 3, 4, 5, 6 D 0 to D3 parallel data inputs 7D SL serial data shift-left input

8 GND ground (0 V)

9, 10 S 0, S1 mode control inputs

11 CP clock input (LOW-to-HIGH, edge-triggered)

15, 14, 13, 12 Q 0 to Q3 3-state parallel outputs

16 V CC positive supply voltage

Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.

Philips Semiconductors Product specification 4-bit bidirectional universal shift register; 3-state 74HC/HCT40104 Fig.4 Functional diagram. FUNCTION TABLE Notes 1. H = HIGH voltage level L = LOW voltage level X = don’t care t n+1 = state after next LOW-to-HIGH transition of CP OPE- RATING MODES INPUTS (OE = HIGH) OUTPUTS at t n+1 S1 S0 D SR D SL D 0 to D 3 Q 0 Q 1 Q 2 Q 3 reset L L X X X L L L L shift leftH H L L X X L H X X Q 1 Q 1 Q 2 Q 2 Q 3 Q 3 L H shift rightL L H H L H X X X X L H Q 0 Q 0 Q 1 Q 1 Q 2 Q 2 parallel load H H H H X X X X L H L H L H L H L H Fig.5 Logic diagram.

Philips Semiconductors Product specification 4-bit bidirectional universal shift register; 3-state 74HC/HCT40104 DC CHARACTERISTICS FOR 74HC For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: bus driver ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay CP to Qn 170 215 255 ns 2.0 4.5 6.0 Fig.6 t PZH / tPZL 3-state output enable time OE to Qn 150 190 225 ns 2.0 4.5 6.0 Fig.8 t PHZ / tPLZ 3-state output disable time OE to Qn 150 190 225 ns 2.0 4.5 6.0 Fig.8 t THL / tTLH output transition time 14 ns 2.0 4.5 6.0 Fig.6 t W clock pulse width HIGH or LOW 100 120 ns 2.0 4.5 6.0 Fig.6 t su set-up time D n, DSR , DSL to CP 100 120 ns 2.0 4.5 6.0 Fig.8 t su set-up time S0, S1 to CP 100 120 ns 2.0 4.5 6.0 Fig.8 t h hold time D n, DSR , DSL to CP ns 2.0 4.5 6.0 Fig.8 t h hold time S0, S1 to CP −14 ns 2.0 4.5 6.0 Fig.8 f max maximum clock pulse frequency 6.0 4.8 4.0 MHz 2.0 4.5 6.0 Fig.6

Philips Semiconductors Product specification 4-bit bidirectional universal shift register; 3-state 74HC/HCT40104 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: bus driver ICC category: MSI Note to HCT types The value of additional quiescent supply current (ΔICC ) for a unit load of 1 is given in the family specifications. To determineΔICC per input, multiply this value by the unit load coefficient shown in the table below. AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr =tf= 6 ns; CL = 50 pF INPUT UNIT LOAD COEFFICIENT D 0 to D3 D SR , DSL CP S0, S1 OE 0.35 0.35 0.35 0.70 1.40 SYMBOL PARAMETER T amb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay CP to Qn 18 34 43 51 ns 4.5 Fig.6 tPZH / tPZL 3-state output enable time OE to Qn 12 30 38 45 ns 4.5 Fig.8 tPHZ / tPLZ 3-state output disable time OE to Qn 21 35 44 53 ns 4.5 Fig.8 tTHL / tTLH output transition time 5 12 15 18 ns 4.5 Fig.6 tW clock pulse width HIGH or LOW 16 7 20 24 ns 4.5 Fig.6 tsu set-up time D n, DSR , DSL to CP 16 8 20 24 ns 4.5 Fig.8 tsu set-up time S0, S1 to CP 20 9 25 30 ns 4.5 Fig.8 th hold time D n, DSR , DSL to CP 2 −2 2 2 ns 4.5 Fig.8 th hold time S0, S1 to CP 2 −5 2 2 ns 4.5 Fig.8 fmax maximum clock pulse frequency 27 52 22 18 MHz 4.5 Fig.6

Philips Semiconductors Product specification 4-bit bidirectional universal shift register; 3-state 74HC/HCT40104 AC WAVEFORMS Fig.6 Waveforms showing the clock (CP) to output (Qn) propagation delays, the clock pulse width, the output transition times and the maximum clock frequency. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.7 Waveforms showing the 3-state enable and disable times. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.8 Waveforms showing the set-up and hold times from the Dn, DSR , DSL and Sn inputs to the clock (CP). The shaded areas indicate when the input is permitted to change for predictable output performance. (1) HC : V M = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V.

Philips Semiconductors Product specification 4-bit bidirectional universal shift register; 3-state 74HC/HCT40104 PACKAGE OUTLINES See “74HC/HCT/HCU/HCMOS Logic Package Outlines”.