74HC40102 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 11

Technical content

Product specification File under Integrated Circuits, IC06 December 1990 INTEGRATED CIRCUITS 74HC/HCT40102 8-bit synchronous BCD down counter For a complete data sheet, please also download:

  • The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines

Philips Semiconductors Product specification 8-bit synchronous BCD down counter 74HC/HCT40102

FEATURES

  • Cascadable
  • Synchronous or asynchronous preset
  • Output capability: standard
  • ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT40102 are high-speed Si-gate CMOS devices and are pin compatible with the “40102” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT40102 consist each of an 8-bit synchronous down counter with a single output which is active when the internal count is zero. The “40102” is configured as two cascaded 4-bit BCD counters and has control inputs for enabling or disabling the clock (CP), for clearing the counter to its maximum count, and for presetting the counter either synchronously or asynchronously. All control inputs and the terminal count output ( TC) are active-LOW logic. In normal operation, the counter is decremented by one count on each positive-going transition of the clock (CP). Counting is inhibited when the terminal enable input ( TE) is HIGH. The terminal count output (TC) goes LOW when the count reaches zero ifTE is LOW, and remains LOW for one full clock period. When the synchronous preset enable input (PE) is LOW, data at the jam input (P0 to P7) is clocked into the counter on the next positive-going clock transition regardless of the state of TE. When the asynchronous preset enable input (PL) is LOW, data at the jam input (P0 to P7) is asynchronously forced into the counter regardless of the state of PE, TE, or CP. The jam inputs (P0 to P7) represent two 4-bit BCD words. When the master reset input (MR) is LOW, the counter is asynchronously cleared to its maximum count (decimal 99) regardless of the state of any other input. The precedence relationship between control inputs is indicated in the function table. If all control inputs except TE are HIGH at the time of zero count, the counters will jump to the maximum count, giving a counting sequence of 100 clock pulses long. The “40102” may be cascaded using the TE input and the TC output, in either a synchronous or ripple mode.

APPLICATIONS

  • Divide-by-n counters
  • Programmable timers
  • Interrupt timers
  • Cycle/program counters QUICK REFERENCE DATA GND = 0 V; Tamb =2 5°C; tr =tf= 6 ns Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD =C PD × VCC 2 × fi+∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC 2 × fo) = sum of outputs C L = output load capacitance in pF VCC = supply voltage in V SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPHL / tPLH propagation delay CP toTC C L = 15 pF; VCC = 5 V 30 31 ns fmax maximum clock frequency 30 30 MHz C I input capacitance 3.5 3.5 pF C PD power dissipation capacitance per package notes 1 and 2 20 25 pF

Philips Semiconductors Product specification 8-bit synchronous BCD down counter 74HC/HCT40102 2. For HC the condition is VI= GND to VCC For HCT the condition is VI= GND to VCC − 1.5 V

ORDERING INFORMATION

See “74HC/HCT/HCU/HCMOS Logic Package Information”. PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION

1 CP clock input (LOW-to-HIGH, edge-triggered)

2 MR asynchronous master reset input (active LOW)

3 TE terminal enable input

4, 5, 6, 7, 10, 11, 12, 13 P0 to P7 jam inputs

8 GND ground (0 V)

PL asynchronous preset enable input (active LOW)

14 TC terminal count output (active LOW)

15 PE synchronous preset enable input (active LOW)

16 V CC positive supply voltage

Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.

Philips Semiconductors Product specification 8-bit synchronous BCD down counter 74HC/HCT40102 FUNCTION TABLE Notes 1. Clock connected to CP. 2. Synchronous operation: changes occur on the LOW-to-HIGH CP transition. 3. Jam inputs: MSD = P 7, LSD = P0. H = HIGH voltage level L = LOW voltage level X = don’t care CONTROL INPUTS PRESET MODE ACTION MR PL PE TE HH HH synchronous inhibit counter H H H L count down H H L X preset on next LOW-to HIGH clock transition HL XX asynchronous preset asynchronously L X X X clear to maximum count Fig.4 Functional diagram.

Philips Semiconductors Product specification 8-bit synchronous BCD down counter 74HC/HCT40102 Fig.5 Logic diagram. Fig.6 Timing diagram.

Philips Semiconductors Product specification 8-bit synchronous BCD down counter 74HC/HCT40102 DC CHARACTERISTICS FOR 74HC For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay CP toTC 300 375 450 ns 2.0 4.5 6.0 Fig.8 t PHL / tPLH propagation delay TE toTC 200 250 300 ns 2.0 4.5 6.0 Fig.8 t PHL / tPLH propagation delay Pn,PL toTC 110 240 425 510 102 ns 2.0 4.5 6.0 Fig.8 t PLH propagation delay MR to TC 275 345 415 ns 2.0 4.5 6.0 Fig.8 t THL / tTLH output transition time 9 110 ns 2.0 4.5 6.0 Figs 8 and 8 t W clock pulse width HIGH or LOW 165 205 250 ns 2.0 4.5 6.0 Fig.8 t W master reset pulse width LOW 150 190 225 ns 2.0 4.5 6.0 Fig.8 t W preset enable pulse width PL; LOW 125 155 190 ns 2.0 4.5 6.0 Fig.8 t rem removal time PL;MR to CP ns 2.0 4.5 6.0 Fig.8 t su set-up time PE to CP 100 125 150 ns 2.0 4.5 6.0 Fig.8 t su set-up time TE to CP 175 220 265 ns 2.0 4.5 6.0 Fig.8

Philips Semiconductors Product specification 8-bit synchronous BCD down counter 74HC/HCT40102 tsu set-up time Pn to CP 100 125 150 ns 2.0 4.5 6.0 Fig.8 t h hold time PE to CP ns 2.0 4.5 6.0 Fig.8 t h hold time TE to CP −41 −15 −12 ns 2.0 4.5 6.0 Fig.8 t h hold time Pn to CP ns 2.0 4.5 6.0 Fig.8 f max maximum clock pulse frequency 8.9 MHz 2.0 4.5 6.0 Fig.8 SYMBOL PARAMETER T amb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125

Philips Semiconductors Product specification 8-bit synchronous BCD down counter 74HC/HCT40102 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI Note to HCT types The value of additional quiescent supply current (ΔICC ) for a unit load of 1 is given in the family specifications. To determineΔICC per input, multiply this value by the unit load coefficient shown in the table below. INPUT UNIT LOAD COEFFICIENT CP, PE MR TE Pn PL 1.50 1.00 0.80 0.25 0.35

Philips Semiconductors Product specification 8-bit synchronous BCD down counter 74HC/HCT40102 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay Pn; CP toTC 38 63 79 95 ns 4.5 Figs 8 and 8 tPHL / tPLH propagation delay TE toTC 25 50 63 75 ns 4.5 Fig.8 tPHL / tPLH propagation delay PL toTC 49 83 104 125 ns 4.5 Fig.8 tPLH propagation delay MR to TC 31 55 69 83 ns 4.5 Fig.8 tTHL / tTLH output transition time 7 15 19 22 ns 4.5 Figs 8 and 8 tW clock pulse width HIGH or LOW 33 11 41 50 ns 4.5 Fig.8 tW master reset pulse width LOW 30 16 38 45 ns 4.5 Fig.8 tW preset enable pulse width PL; LOW 43 25 54 65 ns 4.5 Fig.8 trem removal time PL;MR to CP 10 1 13 15 ns 4.5 Fig.8 tsu set-up time PE to CP 20 10 25 30 ns 4.5 Fig.8 tsu set-up time TE to CP 40 20 50 60 ns 4.5 Fig.8 tsu set-up time Pn to CP 20 12 25 30 ns 4.5 Fig.8 th hold time PE to CP 0 −4 0 0 ns 4.5 Fig.8 th hold time TE to CP 0 −15 0 0 ns 4.5 Fig.8 th hold time Pn to CP 0 −6 0 0 ns 4.5 Fig.8 fmax maximum clock pulse frequency 15 27 12 10 MHz 4.5 Fig.8

Philips Semiconductors Product specification 8-bit synchronous BCD down counter 74HC/HCT40102 AC WAVEFORMS Fig.7 Waveforms showing the clock input (CP) to TC propagation delays, the clock pulse width, the output transition times and the maximum clock pulse frequency. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.8 Waveforms showing theTE to TC propagation delays. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.9 Waveforms showingPL,MR, Pn to TC propagation delays. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.10 Waveforms showing removal time for MR and PL. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.11 Waveforms showing hold and set-up times forMR or PE to CP. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.12 Waveforms showing hold and set-up times for Pn,PE to CP. The shaded areas indicate when the input is permitted to change for predictable output performance. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V.

Philips Semiconductors Product specification 8-bit synchronous BCD down counter 74HC/HCT40102

APPLICATION INFORMATION

See “74HC/HCT/HCU/HCMOS Logic Package Outlines”. Fig.13 Programmable timer. Fig.14 Divide-by-N counter.