74HC390 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 7

Technical content

Product specification File under Integrated Circuits, IC06 December 1990 INTEGRATED CIRCUITS 74HC/HCT390 Dual decade ripple counter For a complete data sheet, please also download:

  • The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines

Philips Semiconductors Product specification Dual decade ripple counter 74HC/HCT390

FEATURES

  • Two BCD decade or bi-quinary counters
  • One package can be configured to divide-by-2, 4, 5, 10, 20, 25, 50 or 100
  • Two master reset inputs to clear each decade counter individually
  • Output capability: standard
  • ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT390 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT390 are dual 4-bit decade ripple counters divided into four separately clocked sections. The counters have two divide-by-2 sections and two divide-by-5 sections. These sections are normally used in a BCD decade or bi-quinary configuration, since they share a common master reset input (nMR). If the two master reset inputs (1MR and 2MR) are used to simultaneously clear all 8 bits of the counter, a number of counting configurations are possible within one package. The separate clocks CP 0 and nCP 1 ) of each section allow ripple counter or frequency division applications of divide-by-2, 4, 5, 10, 20, 25, 50 or 100. Each section is triggered by the HIGH-to-LOW transition of the clock inputs (n CP 0 and nCP 1 ). For BCD decade operation, the nQ0 output is connected to the nCP 1 input of, the divide-by-5 section. For bi-quinary decade operation, the nQ 3 output is connected to the nCP 0 input and nQ0 becomes the decade output. The master reset inputs (1MR and 2MR) are active HIGH asynchronous inputs to each decade counter which operates on the portion of the counter identified by the “1” and “2” prefixes in the pin configuration. A HIGH level on the nMR input overrides the clocks and sets the four outputs LOW. QUICK REFERENCE DATA GND = 0 V; T amb =2 5°C; tr =tf= 6 ns Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD =C PD × VCC 2 × fi+∑ (CL × VCC 2 × fo) where: fi = input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC 2 × fo) = sum of outputs C L = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI= GND to VCC For HCT the condition is VI= GND to VCC −1.5 V SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPHL / tPLH propagation delay C L = 15 pF; VCC =5V nCP 0 to nQ0 14 18 ns nCP 1 to nQ1 15 19 ns nCP 1 to nQ2 23 26 ns nCP 1 to nQ3 15 19 ns nMR to Qn 16 18 ns fmax maximum clock frequency nCP 0,nCP 1 66 61 MHz C I input capacitance 3.5 3.5 pF C PD power dissipation capacitance per counter notes 1 and 2 20 21 pF

Philips Semiconductors Product specification Dual decade ripple counter 74HC/HCT390

ORDERING INFORMATION

See “74HC/HCT/HCU/HCMOS Logic Package Information”. PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 1, 15 1 CP 0, 2CP 0 clock input divide-by-2 section (HIGH-to-LOW, edge-triggered) 2, 14 1MR, 2MR asynchronous master reset inputs (active HIGH) 3, 5, 6, 7 1Q 0 to 1Q3 flip-flop outputs 4, 12 1 CP 1, 2CP 1 clock input divide-by-5 section (HIGH-to-LOW, edge triggered)

8 GND ground (0 V)

13, 11, 10, 9 2Q 0 to 2Q3 flip-flop outputs

16 V CC positive supply voltage

Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.

Philips Semiconductors Product specification Dual decade ripple counter 74HC/HCT390 Fig.4 Functional diagram. BCD COUNT SEQUENCE FOR 1/2 THE “390” Notes 1. Output Q0 connected to nCP 1 with counter input on nCP 0. H = HIGH voltage level L = LOW voltage level COUNT OUTPUTS Q

0 Q 1 Q 2 Q 3

0 LLLL

1 H LLL

3 HHL L

4 LLH L

6 L HHL

7 HHHL

8 LLLH

9 H LLH

FOR 1/2 THE “390” Note 1. Output Q3 connected to nCP 0 with counter input on nCP 1. COUNT OUTPUTS Q 0 Q 1 Q 2 Q 3

2 LLH L

3 L HHL

4 LLLH

5 H LLL

6 HHL L

8 HHHL

Fig.5 Logic diagram (one counter).

Philips Semiconductors Product specification Dual decade ripple counter 74HC/HCT390 DC CHARACTERISTICS FOR 74HC For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr =tf= 6 ns; CL =5 0p F SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay nCP 0 to nQ0 145 180 220 ns 2.0 4.5 6.0 Fig.6 t PHL / tPLH propagation delay nCP 1 to nQ1 155 195 235 ns 2.0 4.5 6.0 Fig.6 t PHL / tPLH propagation delay nCP 1 to nQ2 210 265 315 ns 2.0 4.5 6.0 Fig.6 t PHL / tPLH propagation delay nCP 1 to nQ3 155 195 235 ns 2.0 4.5 6.0 Fig.6 t PHL propagation delay nMR to nQn 165 205 250 ns 2.0 4.5 6.0 Fig.7 t THL / tTLH output transition time 19 110 ns 2.0 4.5 6.0 Fig.6 t W clock pulse width nCP 0, nCP 1 100 120 ns 2.0 4.5 6.0 Fig.6 t W master reset pulse width HIGH 105 130 ns 2.0 4.5 6.0 Fig.7 t rem removal time nMR to nCP n 110 ns 2.0 4.5 6.0 Fig.7 f max maximum clock pulse frequency n CP 0, nCP 1 6.0 4.8 4.0 MHz 2.0 4.5 6.0 Fig.6

Philips Semiconductors Product specification Dual decade ripple counter 74HC/HCT390 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI Note to HCT types The value of additional quiescent supply current (ΔICC ) for a unit load of 1 is given in the family specifications. To determineΔICC per input, multiply this value by the unit load coefficient shown in the table below. AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr =tf= 6 ns; CL =5 0p F INPUT UNIT LOAD COEFFICIENT nCP 0 nCP 1, nMR 0.45 0.60 SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay nCP 0 to nQ0 21 34 43 51 ns 4.5 Fig.6 tPHL / tPLH propagation delay nCP 1 to nQ1 22 38 48 57 ns 4.5 Fig.6 tPHL / tPLH propagation delay nCP 1 to nQ2 30 51 64 77 ns 4.5 Fig.6 tPHL / tPLH propagation delay nCP 1 to nQ3 22 38 48 57 ns 4.5 Fig.6 tPHL propagation delay nMR to nQn 21 36 45 54 ns 4.5 Fig.7 tTHL / tTLH output transition time 7 15 19 22 ns 4.5 Fig.6 tW clock pulse width nCP 0, nCP 1 18 8 23 27 ns 4.5 Fig.6 tW master reset pulse width HIGH 17 10 21 26 ns 4.5 Fig.7 trem removal time nMR to nCP n 15 8 19 22 ns 4.5 Fig.7 fmax maximum clock pulse frequency n CP 0, nCP 1 27 55 22 18 MHz 4.5 Fig.6

Philips Semiconductors Product specification Dual decade ripple counter 74HC/HCT390 AC WAVEFORMS PACKAGE OUTLINES See “74HC/HCT/HCU/HCMOS Logic Package Outlines”. Fig.6 Waveforms showing the clock (nCP n) to output (nQn) propagation delays, the clock pulse width, the output transition times and the maximum clock frequency. (1) HC : VM = 50%; VI= GND to VCC . HCT : VM = 1.3 V; VI= GND to 3 V. Fig.7 Waveforms showing the master reset (nMR) pulse width, the master reset to output (nQn) propagation delays and the master reset to clock (nCP n) removal time. (1) HC : VM = 50%; VI= GND to VCC . HCT : VM = 1.3 V; VI= GND to 3 V.