74HC366 NXP

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 19

Technical content

with Low-power Schottky TTL (LSTTL). OEn causes the outputs to assume a high-impedance OFF-state.

  • 74HC365; 74HCT365, but has inverted outputs 2. Features n Inverting outputs n Complies with JEDEC standard no. 7A n ESD protection: u HBM EIA/JESD22-A114-D exceeds 2000 V u MM EIA/JESD22-A115-A exceeds 200 V n Specified from−40 °Ct o+ 8 5°C and from−40 °C to +125°C 3. Ordering information 74HC366; 74HCT366 Hex buffer/line driver; 3-state; inverting Rev. 03 — 21 November 2006 Product data sheet

Table 1. Ordering information

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved. Product data sheet Rev. 03 — 21 November 2006 2 of 19 NXP Semiconductors 74HC366; 74HCT366 Hex buffer/line driver; 3-state; inverting 4. Functional diagram Fig 1. Functional diagram Fig 2. Logic symbol Fig 3. IEC logic symbol 001aaf583 1A2 2A 2Y 3A 3Y 4A 4Y OE1 OE2 5A 5Y 001aaf581 1A 1Y 2A 2Y 3A 3Y 4A 4Y OE1 OE2 5A 5Y 001aaf582 15 & EN Fig 4. Logic diagram 001aaf584 VCC GND OE1 OE2 2A 2Y buffer/line driver 1 buffer/line driver 2 buffer/line driver 3 buffer/line driver 4 buffer/line driver 5 buffer/line driver 6

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved.

5.1 Pinning

5.2 Pin description

Table 2. Pin description

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved. Z = high-impedance OFF-state. [1] For DIP16 package: Ptot derates linearly with 12 mW/K above 70°C. [2] For SO16 package: Ptot derates linearly with 8 mW/K above 70°C. [3] For SSOP16 and TSSOP16 packages: Ptot derates linearly with 5.5 mW/K above 60°C.

  1. Recommended operating conditions

Table 3. Function table[1] Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Table 5. Recommended operating conditions

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved. Table 5. Recommended operating conditions …continued Table 6. Static characteristics 74HC366 At recommended operating conditions; voltages are referenced to GND (ground = 0 V).

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved. Table 6. Static characteristics 74HC366 …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V).

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved. At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Table 7. Static characteristics 74HCT366 At recommended operating conditions; voltages are referenced to GND (ground = 0 V).

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved. Table 7. Static characteristics 74HCT366 …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Table 8. Dynamic characteristics 74HC366 Voltages are referenced to GND (ground = 0 V); CL = 50 pF unless otherwise specified; see test circuitFigure8.

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved. Table 8. Dynamic characteristics 74HC366 …continued Voltages are referenced to GND (ground = 0 V); CL = 50 pF unless otherwise specified; see test circuitFigure8.

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved. [1] tpd is the same as tPHL and tPLH . [2] ten is the same as tPZH and tPZL . [3] tdis is the same as tPHZ and tPLZ . [4] tt is the same as tTHL and tTLH . [5] C PD is used to determine the dynamic power dissipation (PD inµW). L × VCC 2 × fo) = sum of outputs. [1] tpd is the same as tPHL and tPLH . [2] ten is the same as tPZH and tPZL . [3] tdis is the same as tPHZ and tPLZ . Voltages are referenced to GND (ground = 0 V); CL = 50 pF unless otherwise specified; see test circuitFigure8. Table 9. Dynamic characteristics 74HCT366 Voltages are referenced to GND (ground = 0 V); CL = 50 pF unless otherwise specified; see test circuitFigure8.

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved. Product data sheet Rev. 03 — 21 November 2006 11 of 19 NXP Semiconductors 74HC366; 74HCT366 Hex buffer/line driver; 3-state; inverting [4] tt is the same as tTHL and tTLH . [5] C PD is used to determine the dynamic power dissipation (PD inµW). PD =C PD × VCC 2 × fi× N + ∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz; fo = output frequency in MHz; C L = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; ∑ (C L × VCC 2 × fo) = sum of outputs. 11. Waveforms Measurement points are given inTable10. VOL and VOH are typical output voltage drop that occur with the output load. Fig 6. Propagation delay data input (nA) to output (nY) and output transition time 001aaf585 VM VM tPHL tTHL tTLH tPLH VM VM nA input VI GND VOH VOL nY output Measurement points are given inTable10. VOL and VOH are typical output voltage drop that occur with the output load. Fig 7. 3-state enable and disable times 001aaf586 tPLZ tPHZ outputs disabled outputs enabled VY VX VI GND VCC VOL VOH GND outputs enabled nY output LOW-to-OFF OFF-to-LOW nY output HIGH-to-OFF OFF-to-HIGH OEn input VM VM tPZL tPZH VM VM

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved. Table 10. Measurement points Test data is given inTable11. Table 11. Test data

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved. Product data sheet Rev. 03 — 21 November 2006 13 of 19 NXP Semiconductors 74HC366; 74HCT366 Hex buffer/line driver; 3-state; inverting 12. Package outline Fig 9. Package outline SOT109-1 (SO16) X w M q AA 1 A 2 bp D H E Lp Q detail X E Z e c L v M A (A )3 A y pin 1 index UNIT A max. A 1 A 2 A 3 bp cD (1) E (1) (1)eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm inches 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 10.0 9.8 4.0 3.8 1.27 6.2 5.8 0.7 0.6 0.7 0.3 8 o o 0.25 0.1 DIMENSIONS (inch dimensions are derived from the original mm dimensions) Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.0 0.4 SOT109-1 99-12-27 03-02-19 076E07 MS-012 0.069 0.010 0.004 0.057 0.049 0.01 0.019 0.014 0.0100 0.0075 0.39 0.38 0.16 0.15 0.05 1.05 0.0410.244 0.228 0.028 0.020 0.028 0.0120.01 0.25 0.01 0.0040.039 0.016 0 2.5 5 mm scale SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved. Product data sheet Rev. 03 — 21 November 2006 14 of 19 NXP Semiconductors 74HC366; 74HCT366 Hex buffer/line driver; 3-state; inverting Fig 10. Package outline SOT338-1 (SSOP16) UNIT A 1 A 2 A 3 bp cD (1) E (1) eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.21 0.05 1.80 1.65 0.25 0.38 0.25 0.20 0.09 6.4 6.0 5.4 5.2 0.65 1.257.9 7.6 1.03 0.63 0.9 0.7 1.00 0.55 o o0.130.2 0.1 DIMENSIONS (mm are the original dimensions) Note 1. Plastic or metal protrusions of 0.25 mm maximum per side are not included. SOT338-1 99-12-27 03-02-19 (1) w M bp D H E E Z e c v M A X A y 1 8 16 9 q AA 1 A 2 Lp Q detail X L (A )3 MO-150 pin 1 index 0 2.5 5 mm scale SSOP16: plastic shrink small outline package; 16 leads; body width 5.3 mm SOT338-1 A max.

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved. Product data sheet Rev. 03 — 21 November 2006 15 of 19 NXP Semiconductors 74HC366; 74HCT366 Hex buffer/line driver; 3-state; inverting Fig 11. Package outline SOT38-1 (DIP16) UNIT A max. 1 2 b1 cE e M HL REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm inches DIMENSIONS (inch dimensions are derived from the original mm dimensions) SOT38-1 99-12-27 03-02-13 A min. A max. b max.wM Ee1 1.40 1.14 0.055 0.045 0.53 0.38 0.32 0.23 21.8 21.4 0.86 0.84 6.48 6.20 0.26 0.24 3.9 3.4 0.15 0.13 0.2542.54 7.62 0.3 8.25 7.80 0.32 0.31 9.5 8.3 0.37 0.33 2.2 0.087 4.7 0.51 3.7 0.15 0.021 0.015 0.013 050G09 MO-001 SC-503-16 M H c (e )1 M E A L seating plane w M e D A 2 Z b E pin 1 index 0 5 10 mm scale Note 1. Plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included. (1) (1)D (1)Z DIP16: plastic dual in-line package; 16 leads (300 mil); long body SOT38-1

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved. Product data sheet Rev. 03 — 21 November 2006 16 of 19 NXP Semiconductors 74HC366; 74HCT366 Hex buffer/line driver; 3-state; inverting Fig 12. Package outline SOT403-1 (TSSOP16) UNIT A 1 A 2 A 3 bp cD (1) E (2) (1)eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.40 0.06 o o0.13 0.10.21 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 SOT403-1 MO-153 99-12-27 03-02-18 w M bp D Z e 0.25 16 9 q AA 1 A 2 Lp Q detail X L (A )3 H E E c v M A XA y 0 2.5 5 mm scale TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1 A max. 1.1 pin 1 index

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved. Table 12. Abbreviations Table 13. Revision history

  • The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors
  • Legal texts have been adapted to the new company name where appropriate
  • Added family specification 74HC_HCT366_CNV_2 19901201 Product specification - -

74HC_HCT366_3 © NXP B.V. 2006. All rights reserved. Product data sheet Rev. 03 — 21 November 2006 18 of 19 NXP Semiconductors 74HC366; 74HCT366 Hex buffer/line driver; 3-state; inverting 15. Legal information

15.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.

15.2 Definitions

Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.

15.3 Disclaimers

General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use —NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of a NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale —NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.

15.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 16. Contact information For additional information, please visit:http://www.nxp.com For sales office addresses, send an email to:salesaddresses@nxp.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.

NXP Semiconductors 74HC366; 74HCT366 Hex buffer/line driver; 3-state; inverting © NXP B.V. 2006. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 21 November 2006 Document identifier: 74HC_HCT366_3 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 17. Contents