74HC365 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 7

Technical content

Product specification File under Integrated Circuits, IC06 December 1990 INTEGRATED CIRCUITS 74HC/HCT365 Hex buffer/line driver; 3-state For a complete data sheet, please also download:

  • The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines

Philips Semiconductors Product specification Hex buffer/line driver; 3-state 74HC/HCT365

FEATURES

  • Non-inverting outputs
  • Output capability: bus driver
  • ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT365 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT365 are hex non-inverting buffer/line drivers with 3-state outputs. The 3-state outputs (nY) are controlled by the output enable inputs ( OE 1,OE 2). A HIGH onOE n causes the outputs to assume a high impedance OFF-state. The “365” is identical to the “366” but has non-inverting outputs. QUICK REFERENCE DATA GND = 0 V; Tamb =2 5°C; tr =tf= 6 ns Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD =C PD × VCC 2 × fi + ∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC 2 × fo) = sum of outputs C L = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI= GND to VCC For HCT the condition is VI= GND to VCC − 1.5 V

ORDERING INFORMATION

See “74HC/HCT/HCU/HCMOS Logic Package Information”. SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPHL / tPLH propagation delay nA to nY C L = 15 pF; VCC =5 V 9 1 1 n s C I input capacitance 3,5 3,5 pF C PD power dissipation capacitance per buffer notes 1 and 2 40 40 pF

Philips Semiconductors Product specification Hex buffer/line driver; 3-state 74HC/HCT365 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 1, 15 OE 1,OE 2 output enable inputs (active LOW) 2, 4, 6, 10, 12, 14 1A to 6A data inputs 3, 5, 7, 9, 11, 13 1Y to 6Y data outputs

8 GND ground (0 V)

CC positive supply voltage Fig.1 Pin configuration. Fig.2 Fig.3 IEC logic symbol.

Philips Semiconductors Product specification Hex buffer/line driver; 3-state 74HC/HCT365 Fig.4 Functional diagram. FUNCTION TABLE Notes 1. H = HIGH voltage level L = LOW voltage level X = don’t care Z = high impedance OFF-state INPUTS OUTPUT OE 1 OE 2 nA nY L L X H L L H X L H X X L H Z Z Fig.5 Logic diagram.

Philips Semiconductors Product specification Hex buffer/line driver; 3-state 74HC/HCT365 DC CHARACTERISTICS FOR 74HC For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: bus driver ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay nA to nY 120 145 ns 2.0 4.5 6.0 Fig.6 t PZH / tPZL 3-state output enable time OE n to nY 150 190 225 ns 2.0 4.5 6.0 Fig.7 t PHZ / tPLZ 3-state output disable time OE n to nY 150 190 225 ns 2.0 4.5 6.0 Fig.7 t THL / tTLH output transition time 14 ns 2.0 4.5 6.0 Fig.6

Philips Semiconductors Product specification Hex buffer/line driver; 3-state 74HC/HCT365 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: bus driver ICC category: MSI Note to HCT types The value of additional quiescent supply current (ΔICC ) for a unit load of 1 is given in the family specifications. To determineΔICC per input, multiply this value by the unit load coefficient shown in the table below. AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr =tf= 6 ns; CL = 50 pF INPUT UNIT LOAD COEFFICIENT OE 1 OE 2 nA 1.00 0.90 1.00 SYMBOL PARAMETER T amb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay nA to nY 14 25 31 38 ns 4.5 Fig.6 tPZH / tPZL 3-state output enable time OE n to nY 18 35 44 53 ns 4.5 Fig.7 tPHZ / tPLZ 3-state output disable time OE n to nY 23 35 44 53 ns 4.5 Fig.7 tTHL / tTLH output transition time 5 12 15 18 ns 4.5 Fig.6

Philips Semiconductors Product specification Hex buffer/line driver; 3-state 74HC/HCT365 AC WAVEFORMS PACKAGE OUTLINES See “74HC/HCT/HCU/HCMOS Logic Package Outlines”. Fig.6 Waveforms showing the input (nA) to output (nY) propagation delays and the output transition times. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.7 Waveforms showing the 3-state enable and disable times. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V.