DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TC74HC32AP, TC74HC32AF, TC74HC32AFN (Note) The JEDEC SOP (FN) is not available in QUAD 2-INPUT OR GATE Japan. The TC74HC32A is a high speed CMOS 2- INPUT OR GATE fabricated with silicon gate C2MOS technology. _——— It achieves the high speed operation similar to equivalent aa LSTTL while maintaining the CMOS low power dissipation. i | \\ ve The internal circuit is composed of 2 stages including buffer \\ . a . woos . P (DIP14-P-300-2.54) output, which provide high noise immunity and stable output. Weight : 0.96g (Typ.) All inputs are equipped with protection circuits against static discharge or transient excess voltage. — _— W& =< 4 ee RCccaaae eee FEATURES: ' ' F (SOP14-P-300-1.27) FN (SOL14-P-150-1.27) 1A 1 14 Vee « Symmetrical Output Impedance--| lon | =lo. =4mA (min.) 1Y 3 12 4A « Balanced Propagation Delays: tpLH=tpHL 2A 4 11 4Y e Wide Operating Voltage Range--- Vcc (opr.) = 2V~6V 2B 5 10 3B « Pin and Function Compatible with 74LS32 2v 6 9 3A GND 7 8 3Y (TOP VIEW) IEC LOGIC SYMBOL TRUTH TABLE 2-5) , : ac a pt | fe 38 "a2) 4A (11) fe 3) “y 1 2001-05-17

PARAMETER VALUE UNIT *500mW in the range of Ta= Supply Voltage Range — 40°C~65°C. From Ta=65°C JOC input vortage [Vin | —O5~veewOS | V_] 1 89.C a derating facts of DC Input Voltage Vin 0.5~Vcc + 0.5 Vv OmW/°C shall Fe applied DC Output Voltage =0.5~Vec + 0.5 until 300mw. DC Output Current DC Vec Ground Current [Power Dissipation | Po _| 500(DIP)*/ 180 60P) Storage Temperature —65~150 RECOMMENDED OPERATING CONDITIONS PARAMETER VALUE UNIT Supply Voltage [ve [6s iv +d Input Voltage Output Voltage Operating Temperature —40~85 0~ 1000 (Vcc = 2.0V) Input Rise and Fall Time tr, te O~ 500(Vcc = 4.5V) 0~ 400(Vcc = 6.0V) DC ELECTRICAL CHARACTERISTICS Ta =25°C Ta = -40-85°C PARAMETER __|symaot TEST CONDITION Voc 2 S UNIT! (5 [ww [ Ty. [max.| min, [ MAX. 2.0 | 1.50 1.50 High-Level Vin 45 | 3115 3.15 v P 9 6.0 | 4.20 4.20 Low - Level 2.0 0.50 0.50 Input Voltage Vi 45 1.35 135 | Vv P 9 6.0 1.80 1.80 2.0] 1.9 | 2.0 19 7 lon=—20vA 1 45] 44 | 45 44 High - Level Vin= Output Voltage Vou Vivor Vie 6.0 | 5.9 6.0 59 Vv 2.0 0.0 | 0.1 Low - Level Vou Vin= lor = 204A Pt OO oy Vv Output Voltage VinorV, = = = p 3 me" Vig ed mA 0.17 | 0.26 0.33 lov = 5.2MA 0.18 | 0.26 0.33 [rp teoege covert | Iw | VneVecoreno [eof — | - [#01[ — [10] Vin=Vec or GND feo] — | = | 10 | = [100] " 2 2001-05-17

AC ELECTRICAL CHARACTERISTICS (C, = 15pF, Vcc=5V, Ta= 25°C, Input t, = t;=6ns) Output Transition Time fe fof 8 THL Propagation Delay Time fe foo | et Le PHL AC ELECTRICAL CHARACTERISTICS ( C, = 50pF, Input t, = t;= 6ns) Ta=25°C Ta =-40~85°C PARAMETER TEST CONDITION fycctW[ MIN. [ TYP. [MAX | Min. [ MAX. [NT t 2.0 25 75 95 Output Transition Time Pile 45 7 | 15 19 THE 6.0 6 13 16 t 2.0 24 75 95 Propagation Delay Time f. 4.5 8 15 19 PHL 6.0 7 13 16 Note (1) Cpp is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: Icc (opr) =Cpp * Vec * fin +lcc/4( per Gate ) 3 2001-05-17

DIP 14PIN PACKAGE DIMENSIONS (DIP14-P-300-2.54) Unit in mm 1 8 % | og = e- g Soo s sss i yf ___19.75uax 19.2540.2 Wet } co es | —s ‘° 2.0051¥P, {420.1 25:01 Say re] 0.25G Weight : 0.96g (Typ.) SOP 14PIN (200mil BODY) PACKAGE DIMENSIONS (SOP14-P-300-1.27) Unit in mm 14 8 af a ; /HEHHHAE _s 1 7 10.8MAX. 10.320.2 a x a? Ped =| 2 | 710.1 bag Py 0.80.2 Weight : 0.18g (Typ.) 4 2001-05-17

SOP 14PIN (150mil BODY) PACKAGE DIMENSIONS (SOL14-P-150 -1.27) Unit in mm (Note) This package is not available in Japan. 14 8 HH H HHH =e al a s| 6 HH HEE >) 1 7 O.515TYP_ 0.42=0.07 So25G) 8.6520.1 x & 3 -f 2 # § 3 S 0.7403 Weight : 0.12g (Typ.) 5 2001-05-17

RESTRICTIONS ON PRODUCT USE 00070768 @ TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. @ The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. @ The products described in this document are subject to the foreign exchange and foreign trade laws. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 6 2001-05-17