74HC259 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 11

Technical content

Product specification File under Integrated Circuits, IC06 December 1990 INTEGRATED CIRCUITS 74HC/HCT259 8-bit addressable latch For a complete data sheet, please also download:

  • The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines

Philips Semiconductors Product specification 8-bit addressable latch 74HC/HCT259

FEATURES

  • Combines demultiplexer and 8-bit latch
  • Serial-to-parallel capability
  • Output from each storage bit available
  • Random (addressable) data entry
  • Easily expandable
  • Common reset input
  • Useful as a 3-to-8 active HIGH decoder
  • Output capability: standard
  • ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT259 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT259 are high-speed 8-bit addressable latches designed for general purpose storage applications in digital systems. The “259” are multifunctional devices capable of storing single-line data in eight addressable latches, and also 3-to-8 decoder and demultiplexer, with active HIGH outputs (Q 0 to Q7), functions are available. The “259” also incorporates an active LOW common reset (MR) for resetting all latches, as well as, an active LOW enable input (LE). The “259” has four modes of operation as shown in the mode select table. In the addressable latch mode, data on the data line (D) is written into the addressed latch. The addressed latch will follow the data input with all non-addressed latches remaining in their previous states. In the memory mode, all latches remain in their previous states and are unaffected by the data or address inputs. In the 3-to-8 decoding or demultiplexing mode, the addressed output follows the state of the D input with all other outputs in the LOW state. In the reset mode all outputs are LOW and unaffected by the address (A 0 to A2) and data (D) input. When operating the “259” as an addressable latch, changing more than one bit of address could impose a transient-wrong address. Therefore, this should only be done while in the memory mode. The mode select table summarizes the operations of the “259”. QUICK REFERENCE DATA GND = 0 V; T amb =2 5°C; tr =tf= 6 ns Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD =C PD × VCC 2 × fi+ ∑ (CL × VCC 2 ×fo) where: fi= input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC 2 × fo) = sum of outputs C L = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI= GND to VCC For HCT the condition is VI= GND to VCC − 1.5 V SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPHL/ tPLH propagation delay C L = 15 pF; VCC =5 V D to Qn 18 20 ns An,LE to Qn 17 20 ns tPHL MR to Qn 15 20 ns C I input capacitance 3.5 3.5 pF C PD power dissipation capacitance per latch notes 1 and 2 19 19 pF

Philips Semiconductors Product specification 8-bit addressable latch 74HC/HCT259

ORDERING INFORMATION

See “74HC/HCT/HCU/HCMOS Logic Package Information”. PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 1, 2, 3 A 0 to A2 address inputs 4, 5, 6, 7, 9 10, 11, 12 Q0 to Q7 latch outputs

8 GND ground (0 V)

13 D data input

LE latch enable input (active LOW)

15 MR conditional reset input (active LOW)

16 V CC positive supply voltage

Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.

Philips Semiconductors Product specification 8-bit addressable latch 74HC/HCT259 MODE SELECT TABLE LE MR MODE L H L H H H L L addressable latch memory active HIGH 8-channel demultiplexer reset Fig.4 Functional diagram.

Philips Semiconductors Product specification 8-bit addressable latch 74HC/HCT259 FUNCTION TABLE Notes 1. H = HIGH voltage level L = LOW voltage level X = don’t care d = HIGH or LOW data one set-up time prior to the LOW-to-HIGH LE transition q = lower case letters indicate the state of the referenced output established during the last cycle in which it was addressed or cleared OPERATING MODES INPUTS OUTPUTS MR LE D A 0 A 1 A 2 Q 0 Q 1 Q 2 Q 3 Q 4 Q 5 Q 6 Q 7 master reset L H X X X X L L L L L L L L demultiplex (active HIGH) decoder (when D = H) L L L L L L L L d d d d L H L H L L H H L L L L Q=d L L L L Q=d L L L L Q=d L L L L Q=d L L L L L L L L L L L L L L L L L L L L L L L L d d d d L H L H L L H H H H H H L L L L L L L L L L L L L L L L Q=d L L L L Q=d L L L L Q=d L L L L Q=d store (do nothing) H H X X X X q 0 q1 q2 q3 q4 q5 q6 q7 addressable latch H H H H L L L L d d d d L H L H L L H H L L L L Q=d q Q=d q Q=d q Q=d H H H H L L L L d d d d L H L H L L H H H H H H q Q=d Q=d q Q=d q Q=d

Philips Semiconductors Product specification 8-bit addressable latch 74HC/HCT259 Fig.5 Logic diagram.

Philips Semiconductors Product specification 8-bit addressable latch 74HC/HCT259 DC CHARACTERISTICS FOR 74HC For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay D to Qn 185 230 280 ns 2.0 4.5 6.0 Fig.7 t PHL / tPLH propagation delay An to Qn 185 230 280 ns 2.0 4.5 6.0 Fig.8 t PHL / tPLH propagation delay LE to Qn 170 215 255 ns 2.0 4.5 6.0 Fig.6 t PHL propagation delay MR to Qn 155 195 235 ns 2.0 4.5 6.0 Fig.9 t THL / tTLH output transition time 19 119 ns 2.0 4.5 6.0 Figs 6 and 7 t W LE pulse width HIGH or LOW 105 ns 2.0 4.5 6.0 Fig.6 t W MR pulse width LOW 105 ns 2.0 4.5 6.0 Fig.9 t su set-up time D, An toLE 100 120 ns 2.0 4.5 6.0 Figs 10 and 11 t h hold time D toLE −19 ns 2.0 4.5 6.0 Fig.10 t h hold time An toLE −11 ns 2.0 4.5 6.0 Fig.11

Philips Semiconductors Product specification 8-bit addressable latch 74HC/HCT259 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI Note to HCT types The value of additional quiescent supply current (ΔICC ) for a unit load of 1 is given in the family specifications. To determineΔICC per input, multiply this value by the unit load coefficient shown in the table below. INPUT UNIT LOAD COEFFICIENT An LE D MR 1.50 1.50 1.20 0.75

Philips Semiconductors Product specification 8-bit addressable latch 74HC/HCT259 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) WAVEFORMS +25 −40 TO +85 −40 TO +125 tPHL / tPLH propagation delay D to Qn 23 39 49 59 ns 4.5 Fig.7 tPHL / tPLH propagation delay An to Qn 25 41 51 62 ns 4.5 Fig.8 tPHL / tPLH propagation delay LE to Qn 22 38 48 57 ns 4.5 Fig.6 tPHL propagation delay MR to Qn 23 39 49 59 ns 4.5 Fig.9 tTHL / tTLH output transition time 7 15 19 22 ns 4.5 Figs 6 and 7 tW LE pulse width LOW 19 11 24 29 ns 4.5 Fig.6 tW MR pulse width LOW 18 10 23 27 ns 4.5 Fig.9 tsu set-up time D toLE 17 10 21 26 ns 4.5 Fig.10 tsu set-up time An toLE 17 10 21 26 ns 4.5 Fig.11 th hold time D toLE 0 −8 0 0 ns 4.5 Fig.10 th hold time An toLE 0 −4 0 0 ns 4.5 Fig.11

Philips Semiconductors Product specification 8-bit addressable latch 74HC/HCT259 AC WAVEFORMS Fig.6 Waveforms showing the enable input (LE) to output (Qn) propagation delays, the enable input pulse width and the output transition times. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.7 Waveforms showing the data input (D) to output (Qn) propagation delays and the output transition times. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.8 Waveforms showing the address inputs (An) to outputs (Qn) propagation delays and the output transition times. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V.

Philips Semiconductors Product specification 8-bit addressable latch 74HC/HCT259 PACKAGE OUTLINES See “74HC/HCT/HCU/HCMOS Logic Package Outlines”. Fig.9 Waveforms showing the conditional reset input (MR) to output (Qn) propagation delays. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.10 Waveforms showing the data set-up and hold times for the D input toLE input. The shaded areas indicate when the input is permitted to change for predictable output performance. (1) HC : V M = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.11 Waveforms showing the address set-up and hold times for An inputs toLE input. The shaded areas indicate when the input is permitted to change for predictable output performance. (1) HC : V M = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V.