74HC1G14-Q100 NEXPERIA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 16

Technical content

  1. General description 74HC1G14-Q100 and 74HCT1G14-Q100 are high-speed Si-gate CMOS devices. They provide an inverting buffer function with Schmitt trigger action. These devices are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. The HC device has CMOS input switching levels and supply voltage range 2 V to 6 V. The HCT device has TTL input switching levels and supply voltage range 4.5 V to 5.5 V. The standard output currents are half of those of the 74HC14-Q100 and 74HCT14-Q100. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits  Automotive product qualification in accordance with AEC-Q100 (Grade 1)  Specified from 40 C to +85 C and from 40 C to +125 C  Input levels:  For 74HC1G14-Q100: CMOS level  For 74HCT1G14-Q100: TTL level  Symmetrical output impedance  High noise immunity  Low power dissipation  Balanced propagation delays  ESD protection:  MIL-STD-883, method 3015 exceeds 2000 V  HBM JESD22-A114F exceeds 2000 V  MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )  SOT353-1 and SOT753 package options 3. Applications  Wave and pulse shapers  Astable multivibrators  Monostable multivibrators 74HC1G14-Q100; 74HCT1G14-Q100 Inverting Schmitt trigger Rev. 2 — 27 December 2012 Product data sheet

74HC_HCT1G14_Q100 All information provided in this document is subject to legal disclaimers. [1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.

7.1 Pinning

Table 1. Ordering information Table 2. Marking codes

74HC_HCT1G14_Q100 All information provided in this document is subject to legal disclaimers.

7.2 Pin description

[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] Above 55 C, the value of Ptot derates linearly with 2.5 mW/K.

  1. Recommended operating conditions

Table 3. Pin description Table 4. Function table Table 5. Limiting values Table 6. Recommended operating conditions Voltages are referenced to GND (ground = 0 V).

74HC_HCT1G14_Q100 All information provided in this document is subject to legal disclaimers. Table 6. Recommended operating conditions …continued Voltages are referenced to GND (ground = 0 V). Table 7. Static characteristics Voltages are referenced to GND (ground = 0 V). All typical values are measured at Tamb =2 5 C.

74HC_HCT1G14_Q100 All information provided in this document is subject to legal disclaimers. Table 7. Static characteristics …continued Voltages are referenced to GND (ground = 0 V). All typical values are measured at Tamb =2 5 C. Table 8. Dynamic characteristics

74HC_HCT1G14_Q100 All information provided in this document is subject to legal disclaimers. [1] t pd is the same as tPLH and tPHL. [2] C PD is used to determine the dynamic power dissipation PD (W). Table 8. Dynamic characteristics …continued Measurement points are given in Table 9. Table 9. Measurement points

© Nexperia B.V. 2017. All rights reserved 74HC_HCT1G14_Q100 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 2 — 27 December 2012 7 of 16 Nexperia 74HC1G14-Q100; 74HCT1G14-Q100 Inverting Schmitt trigger 14. Transfer characteristics waveforms Test data is given in Table 8. Definitions for test circuit: CL = Load capacitance including jig and probe capacitance. RT = Termination resistance should be equal to output impedance Zo of the pulse generator. Fig 6. Load circuitry for switching times VCC VI VO mna034 DUT CL 50 pFRT PULSE GENERATOR Fig 7. Transfer characteristic Fig 8. The definitions of V T+, VT and VH; where VT+ and VT are between limits of 20 % and 70 % mna026 VO VH VI VT− VT+ mna027 VO VI VH VT+ VT− Fig 9. Typical 74HC1G14-Q100 transfer characteristics; VCC =2 . 0V Fig 10. Typical 74HC1G14-Q100 transfer characteristics; VCC =4 . 5V mna028 0 2.0 100 ICC (μA)

1.0 VI (V)

0 5.0 1.0 0.8 0.6 0.4 0.2 ICC (mA)

2.5 VI (V)

© Nexperia B.V. 2017. All rights reserved 74HC_HCT1G14_Q100 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 2 — 27 December 2012 8 of 16 Nexperia 74HC1G14-Q100; 74HCT1G14-Q100 Inverting Schmitt trigger 15. Application information The slow input rise and fall times cause additional power dissipation. The additional power dissipation can be calculated using the following formula: Padd =f i  (tr  ICC(AV) +t f  ICC(AV))  VCC Where: Padd = additional power dissipation (W) fi = input frequency (MHz) tr = rise time (ns); 10 % to 90 % Fig 11. Typical 74HC1G14-Q100 transfer characteristics; V CC =6 . 0V mna030 0 3.0 6.0 1.6 0.8 ICC (mA) VI (V) Fig 12. Typical 74HCT1G14-Q100 transfer characteristics; VCC =4 . 5V Fig 13. Typical 74HCT1G14-Q100 transfer characteristics; VCC =5 . 5V mna031 0 5.0 2.0 1.0 ICC (mA) 3.0 2.0 1.0 3.0 6.0 ICC (mA) VI (V)

© Nexperia B.V. 2017. All rights reserved 74HC_HCT1G14_Q100 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 2 — 27 December 2012 9 of 16 Nexperia 74HC1G14-Q100; 74HCT1G14-Q100 Inverting Schmitt trigger tf = fall time (ns); 90 % to 10 % ICC(AV) = average additional supply current (A) ICC(AV) differs with positive or negative input transitions, as shown in Figure 14 and 15. 74HC1G14-Q100 and 74HCT1G14-Q100 used in relaxation oscillator circuit, see Figure 16. Remark: All values given are typical unless otherwise specified. Fig 14. ICC(AV) for 74HC1G14-Q100 devices; linear change of VI between 0.1  VCC to 0.9  VCC Fig 15. ICC(AV) for 74HCT1G14-Q100 devices; linear change of VI between 0.1  VCC to 0.9  VCC mna036 0 2.0 4.0 6.0 VCC (V) 200 150 100 ΔICC(AV) (μA) positive-going edge negative-going edge mna058 04 62 VCC (V) 200 100 150 ΔICC(AV) (μA) positive-going edge negative-going edge

© Nexperia B.V. 2017. All rights reserved 74HC_HCT1G14_Q100 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 2 — 27 December 2012 10 of 16 Nexperia 74HC1G14-Q100; 74HCT1G14-Q100 Inverting Schmitt trigger For 74HC1G14-Q100 and 74HCT1G14-Q100: For K-factor, see Figure 17 Fig 16. Relaxation oscillator mna035 R C f 1 T--- 1 K-factor for 74HC1G14-Q100 K-factor for 74HCT1G14-Q100 Fig 17. Typical K-factor for relaxation oscillator /g57/g38/g38/g3/g11/g57/g12 /g21/g25 /g24/g22/g23 /g68/g68/g68/g16/g19/g19/g23/g25/g19/g28 /g20/g17/g19 /g19/g17/g24 /g20/g17/g24 /g21/g17/g19 /g46 /g19 /g57/g38/g38/g3/g11/g57/g12 /g23/g17/g24 /g24/g17/g19 /g24/g17/g24 /g68/g68/g68/g16/g19/g19/g23/g25/g20/g19 /g19/g17/g25 /g19/g17/g23 /g19/g17/g21 /g19/g17/g27 /g20/g17/g19 /g20/g17/g21 /g46 /g19

© Nexperia B.V. 2017. All rights reserved 74HC_HCT1G14_Q100 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 2 — 27 December 2012 11 of 16 Nexperia 74HC1G14-Q100; 74HCT1G14-Q100 Inverting Schmitt trigger 16. Package outline Fig 18. Package outline SOT353-1 (TSSOP5) UNIT A1 A max. A2 A3 bp L HE Lp wyvce D(1) E(1) Z(1) θ REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.1 1.0 0.8 0.30 0.15 0.25 0.08 2.25 1.85 1.35 1.15 0.65 1.3 2.25 2.0 0.60 0.15 0°0.1 0.10.30.425 DIMENSIONS (mm are the original dimensions) Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 0.46 0.21 SOT353-1 MO-203 SC-88A 00-09-01 03-02-19 w Mbp D Z e 0.15 5 4 θ AA2 Lp (A3) detail X L HE E c v M A X A y 1.5 3 mm0 scale TSSOP5: plastic thin shrink small outline package; 5 leads; body width 1.25 mm SOT353-1 1.1

© Nexperia B.V. 2017. All rights reserved 74HC_HCT1G14_Q100 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 2 — 27 December 2012 12 of 16 Nexperia 74HC1G14-Q100; 74HCT1G14-Q100 Inverting Schmitt trigger Fig 19. Package outline SOT753 (SC-74A) REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT753 SC-74A wBMbp D e A Lp Q detail X HE E v M A AB y 0 1 2 mm scale c X 13 2 Plastic surface-mounted package; 5 leads SOT753 UNIT A1 bp cD E HE Lp Qy w v mm 0.100 0.013 0.40 0.25 3.1 2.7 0.26 0.10 1.7 1.3 e 0.95 3.0 2.5 0.2 0.10.2 DIMENSIONS (mm are the original dimensions) 0.6 0.2 0.33 0.23 A 1.1 0.9 02-04-16 06-03-16

74HC_HCT1G14_Q100 All information provided in this document is subject to legal disclaimers. Table 10. Abbreviations Table 11. Revision history

  • Table 3: Pin number Y output changed from 5 to 4 (errata). 74HC_HCT1G14_Q100 v.1 20120820 Product data sheet - -

© Nexperia B.V. 2017. All rights reserved 74HC_HCT1G14_Q100 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 2 — 27 December 2012 14 of 16 Nexperia 74HC1G14-Q100; 74HCT1G14-Q100 Inverting Schmitt trigger 19. Legal information

19.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nexperia.com .

19.2 Definitions

Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request vi a the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer , unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet.

19.3 Disclaimers

Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. Right to make changes — Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use in automotive applications — This Nexperia product has been qualified for use in automotive applications. Unless otherwise agreed in writing, the product is not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of a Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using Nexperia products in order to av oid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms , unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of Nexperia products by customer. Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.

© Nexperia B.V. 2017. All rights reserved 74HC_HCT1G14_Q100 All information provided in this document is subject to legal disclaimers. Product data sheet Rev. 2 — 27 December 2012 15 of 16 Nexperia 74HC1G14-Q100; 74HCT1G14-Q100 Inverting Schmitt trigger No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions.

19.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 20. Contact information For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com

Nexperia 74HC1G14-Q100; 74HCT1G14-Q100 Inverting Schmitt trigger 21. Contents © Nexperia B.V. 2017. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release:

27 December 2012