74HC195 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 9

Technical content

Product specification File under Integrated Circuits, IC06 December 1990 INTEGRATED CIRCUITS 74HC/HCT195 4-bit parallel access shift register For a complete data sheet, please also download:

  • The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines

Philips Semiconductors Product specification 4-bit parallel access shift register 74HC/HCT195

FEATURES

  • Asynchronous master reset
  • J,K, (D) inputs to the first stage
  • Fully synchronous serial or parallel data transfer
  • Shift right and parallel load capability
  • Complement output from the last stage
  • Output capability: standard
  • ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT195 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT195 performs serial, parallel, serial-to-parallel or parallel-to-serial data transfer at very high speeds. The “195” operates on two primary modes: shift right (Q o→ Q 1) and parallel load, which are controlled by the state of the parallel load enable (PE) input. Serial data enters the first flip-flop (Q0) via the J andK inputs when thePE input is HIGH and shifted one bit in the direction Q0 → Q 1 → Q 2 → Q 3 following each LOW-to-HIGH clock transition. The J andK inputs provide the flexibility of the JK type input for special applications and by tying the pins together, the simple D-type input for general applications. The “195” appears as four common clocked D flip-flops when the PE input is LOW. After the LOW-to-HIGH clock transition, data on the parallel inputs (D0 to D3) is transferred to the respective Q 0 to Q3 outputs. Shift left operation (Q3 → Q2) can be achieved by tying the Qn outputs to the Dn-1 inputs and holding thePE input LOW. All parallel and serial data transfers are synchronous, occurring after each LOW-to-HIGH clock transition. There is no restriction on the activity of the J, K, Dn and PE inputs for logic operation other than the set-up and hold time requirements. A LOW on the asynchronous master reset ( MR) input sets all Q outputs LOW, independent of any other input condition. QUICK REFERENCE DATA GND = 0 V; Tamb = 25°C; tr = tf= 6 ns Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD = CPD × VCC 2 × fi+∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC 2 × fo) = sum of outputs C L = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI= GND to VCC For HCT the condition is VI= GND to VCC − 1,5 V

ORDERING INFORMATION

See “74HC/HCT/HCU/HCMOS Logic Package Information”. SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPHL / tPLH propagation delay CP to Qn C L = 15 pF; VCC = 5 V 15 15 ns fmax maximum clock frequency 57 57 MHz C I input capacitance 3.5 3.5 pF C PD power dissipation capacitance per package notes 1 and 2 105 105 pF

Philips Semiconductors Product specification 4-bit parallel access shift register 74HC/HCT195 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION

1 MR master reset input (active LOW)

2 J first stage J-input (active HIGH)

K first stage K-input (active LOW) 4, 5, 6, 7 D 0 to D3 parallel data inputs

8 GND ground (0 V)

PE parallel enable input (active LOW)

10 CP clock input (LOW-to-HIGH edge-triggered)

Q 3 inverted output from the last stage 15, 14, 13, 12 Q0 to Q3 parallel outputs

16 V CC positive supply voltage

Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.

Philips Semiconductors Product specification 4-bit parallel access shift register 74HC/HCT195

APPLICATIONS

  • Serial data transfer
  • Parallel data transfer
  • Serial-to-parallel data transfer
  • Parallel-to-serial data transfer FUNCTION TABLE Notes 1. H = HIGH voltage level h = HIGH voltage level one set-up time prior to the LOW-to-HIGH clock transition L = LOW voltage level I = LOW voltage level one set-up time prior to the LOW-to-HIGH clock transition q, d = lower case letters indicate the state of the referenced input (or output) one set-up time prior to the LOW-to-HIGH clock transition X = don’t care ↑ = LOW-to-HIGH clock transition OPERATING MODES INPUTS OUTPUTS MR CP PE J KD n Q 0 Q 1 Q 2 Q 3 Q 3 asynchronous reset L X X X X X L L L L H shift, set first stage shift, reset first stage shift, toggle first stage shift, retain first stage H H H H h h h h h l h l h l l h X X X X H L parallel load H ↑ lX X d n d0 d1 d2 d3 d3 Fig.4 Functional diagram.

Philips Semiconductors Product specification 4-bit parallel access shift register 74HC/HCT195 Fig.5 Logic diagram.

Philips Semiconductors Product specification 4-bit parallel access shift register 74HC/HCT195 DC CHARACTERISTICS FOR 74HC For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr = tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay CP to Qn 150 190 225 ns 2.0 4.5 6.0 Fig.6 t PHL propagation delay MR to Qn 150 190 225 ns 2.0 4.5 6.0 Fig.8 t THL / tTLH output transition time 19 110 ns 2.0 4.5 6.0 Fig.6 t W clock pulse width HIGH or LOW 100 120 ns 2.0 4.5 6.0 Fig.6 t W master reset pulse width LOW 100 120 ns 2.0 4.5 6.0 Fig.8 t rem removal time MR to CP 100 120 ns 2.0 4.5 6.0 Fig.8 t su set-up time J to CP 100 125 150 ns 2.0 4.5 6.0 Figs 8 and 9 t su set-up time K,PE, Dn to CP 100 120 ns 2.0 4.5 6.0 Figs 8 and 9 t h hold time J,K,PE, Dn to CP ns 2.0 4.5 6.0 Figs 8 and 9 f max maximum clock pulse frequency MHz 2.0 4.5 6.0 Fig.6

Philips Semiconductors Product specification 4-bit parallel access shift register 74HC/HCT195 DC CHARACTERISTICS FOR HCT For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI Note to HCT types The value of additional quiescent supply current (ΔICC ) for a unit load of 1 is given in the family specifications. To determineΔICC per input, multiply this value by the unit load coefficient shown in the table below. AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr = tf= 6 ns; CL = 50 pF INPUT UNIT LOAD COEFFICIENT PE all others 0.65 0.35 SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay CP to Qn 18 32 40 48 ns 4.5 Fig.6 tPHL propagation delay MR to Qn 17 35 44 53 ns 4.5 Fig.8 tTHL / tTLH output transition time 7 15 19 22 ns 4.5 Fig.6 tW clock pulse width HIGH or LOW 20 6 25 30 ns 4.5 Fig.6 tW master reset pulse width LOW 16 6 20 24 ns 4.5 Fig.8 trem removal time MR to CP 16 6 20 24 ns 4.5 Fig.8 tsu set-up time J,K,PE to CP 20 12 25 30 ns 4.5 Figs 8 and 9 tsu set-up time D n to CP 16 6 20 24 ns 4.5 Figs 8 and 9 th hold time J,K,PE, Dn to CP 3 −5 3 3 ns 4.5 Figs 8 and 9 fmax maximum clock pulse frequency 27 52 22 18 MHz 4.5 Fig.6

Philips Semiconductors Product specification 4-bit parallel access shift register 74HC/HCT195 AC WAVEFORMS Fig.6 Waveforms showing the clock (CP) to output (Qn) propagation delays, the clock pulse width, the output transition times and the maximum clock frequency. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3V; VI= GND to 3 V. Fig.7 Waveforms showing the master reset (MR) pulse width, the master reset to output (Qn) propagation delays and the master reset to clock (CP) removal time (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3V; VI= GND to 3 V. Fig.8 Waveforms showing the data set-up and hold times for J,K and Dn inputs. The shaded areas indicate when the input is permitted to change for predictable output performance. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3V; VI= GND to 3 V. Fig.9 Waveforms showing the set-up and hold times from the parallel enable input PE) to the clock (CP). The shaded areas indicate when the input is permitted to change for predictable output performance. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3V; VI= GND to 3 V.

Philips Semiconductors Product specification 4-bit parallel access shift register 74HC/HCT195 PACKAGE OUTLINES See “74HC/HCT/HCU/HCMOS Logic Package Outlines”.