74HC194 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 10
Technical content
Product specification File under Integrated Circuits, IC06 December 1990 INTEGRATED CIRCUITS 74HC/HCT194 4-bit bidirectional universal shift register For a complete data sheet, please also download:
- The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
- The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
- The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
Philips Semiconductors Product specification 4-bit bidirectional universal shift register 74HC/HCT194
FEATURES
- Shift-left and shift-right capability
- Synchronous parallel and serial data transfer
- Easily expanded for both serial and parallel operation
- Asynchronous master reset
- Hold (“do nothing”) mode
- Output capability: standard
- ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT194 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The functional characteristics of the 74HC/HCT194 4-bit bidirectional universal shift registers are indicated in the logic diagram and function table. The registers are fully synchronous. The “194” design has special features which increase the range of application. The synchronous operation of the device is determined by the mode select inputs (S 0, S1). As shown in the mode select table, data can be entered and shifted from left to right (Q0 → Q 1 → Q 2, etc.) or, right to left (Q3 → Q 2 → Q 1, etc.) or parallel data can be entered, loading all 4 bits of the register simultaneously. When both S 0 and S1 are LOW, existing data is retained in a hold (“do nothing”) mode. The first and last stages provide D-type serial data inputs (D SR , DSL) to allow multistage shift right or shift left data transfers without interfering with parallel load operation. Mode select and data inputs are edge-triggered, responding only to the LOW-to-HIGH transition of the clock (CP). Therefore, the only timing restriction is that the mode control and selected data inputs must be stable one set-up time prior to the positive transition of the clock pulse. The four parallel data inputs (D 0 to D3) are D-type inputs. Data appearing on the D0 to D3 inputs, when S0 and S1 are HIGH, is transferred to the Q0 to Q3 outputs respectively, following the next LOW-to-HIGH transition of the clock. When LOW, the asynchronous master reset ( MR) overrides all other input conditions and forces the Q outputs LOW. The “194” is similar in operation to the “195” universal shift register, with added features of shift-left without external connections and hold (“do nothing”) modes of operation. QUICK REFERENCE DATA GND = 0 V; T amb =2 5°C; tr =tf= 6 ns Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD =C PD × VCC 2 × fi+∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz fo = output frequency in MHz ∑ =( CL × VCC 2 × fo) = sum of outputs C L = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI= GND to VCC ; for HCT the condition is VI= GND to VCC − 1.5 V SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPHL / tPLH propagation delay C L = 15 pF; VCC =5 V CP to Qn 14 15 ns tPHL MR to Qn 11 15 ns fmax maximum clock frequency 102 77 MHz C I input capacitance 3.5 3.5 pF C PD power dissipation capacitance per package notes 1 and 2 40 40 pF
Philips Semiconductors Product specification 4-bit bidirectional universal shift register 74HC/HCT194
ORDERING INFORMATION
See “74HC/HCT/HCU/HCMOS Logic Package Information”. PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION
1 MR asynchronous master reset input (active LOW)
2D SR serial data input (shift right) 3, 4, 5, 6 D 0 to D3 parallel data inputs 7D SL serial data input (shift left)
8 GND ground (0 V)
9, 10 S 0, S1 mode control inputs
11 CP clock input (LOW-to-HIGH edge-triggered)
15, 14, 13, 12 Q 0 to Q3 parallel outputs
16 V CC positive supply voltage
Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.
Philips Semiconductors Product specification 4-bit bidirectional universal shift register 74HC/HCT194 FUNCTION TABLE Notes 1. H = HIGH voltage level h = HIGH voltage level one set-up time prior to the LOW-to-HIGH CP transition L = LOW voltage level I = LOW voltage level one set-up time prior to the LOW-to-HIGH CP transition q,d = lower case letters indicate the state of the referenced input (or output) one set-up time prior to the LOW-to-HIGH CP transition X = don’t care ↑ = LOW-to-HIGH CP transition OPERATING MODES INPUTS OUTPUTS CP MR S 1 S0 D SR D SL D n Q 0 Q 1 Q 2 Q 3 reset (clear) X L XXXXX LLLL hold (“do nothing”) X H I I X X X q 0 q1 q2 q3 shift left ↑ H H h h I I X X I h X X L H shift right ↑ H H I I h h I h X X X X L H parallel load ↑ HhhXX d n d0 d1 d2 d3 Fig.4 Functional diagram.
Philips Semiconductors Product specification 4-bit bidirectional universal shift register 74HC/HCT194 Fig.5 Logic diagram. Fig.6 Typical clear, clear-load, shift-right, shift-left, inhibit and clear timing sequences.
Philips Semiconductors Product specification 4-bit bidirectional universal shift register 74HC/HCT194 DC CHARACTERISTICS FOR 74HC For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI
Philips Semiconductors Product specification 4-bit bidirectional universal shift register 74HC/HCT194 AC CHARACTERISTICS FOR 74HC GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay CP to Qn 145 180 220 ns 2.0 4.5 6.0 Fig.7 t PHL propagation delay MR to Qn 140 175 210 ns 2.0 4.5 6.0 Fig.8 t THL / tTLH output transition time 19 110 ns 2.0 4.5 6.0 Fig.7 t W clock pulse width HIGH or LOW 100 120 ns 2.0 4.5 6.0 Fig.7 t W master reset pulse width; LOW 100 120 ns 2.0 4.5 6.0 Fig.8 t rem removal time MR to CP ns 2.0 4.5 6.0 Fig.8 t su set-up time D n to CP 105 ns 2.0 4.5 6.0 Fig.9 t su set-up time S0, S1 to CP 100 120 ns 2.0 4.5 6.0 Fig.10 t su set-up time D SR , DSL to CP 105 ns 2.0 4.5 6.0 t h hold time D n to CP −14 ns 2.0 4.5 6.0 Fig.9 t h hold time S0, S1 to CP −11 ns 2.0 4.5 6.0 Fig.10 t h hold time D SR , DSL to CP −17 ns 2.0 4.5 6.0 f max maximum clock pulse frequency 6.0 111 4.8 4.0 MHz 2.0 4.5 6.0 Fig.7
Philips Semiconductors Product specification 4-bit bidirectional universal shift register 74HC/HCT194 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI Note to HCT types The value of additional quiescent supply current (ΔICC ) for a unit load of 1 is given in the family specifications. To determineΔICC per input, multiply this value by the unit load coefficient shown in the table below. INPUT UNIT LOAD COEFFICIENT D n D SR , DSL CP MR Sn 0.15 0.15 0.50 0.45 0.90
Philips Semiconductors Product specification 4-bit bidirectional universal shift register 74HC/HCT194 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay CP to Qn 18 32 40 48 ns 4.5 Fig.7 tPHL propagation delay MR to Qn 18 32 40 48 ns 4.5 Fig.8 tTHL / tTLH output transition time 7 15 19 22 ns 4.5 Fig.7 tW clock pulse width HIGH or LOW 16 7 20 24 ns 4.5 Fig.7 tW master reset pulse width; LOW 16 7 20 24 ns 4.5 Fig.8 trem removal time MR to CP 12 6 15 18 ns 4.5 Fig.8 tsu set-up time D n to CP 14 7 18 21 ns 4.5 Fig.9 tsu set-up time S0, S1 to CP 20 10 25 30 ns 4.5 Fig.10 tsu set-up time D SR , DSL to CP 14 18 21 ns 4.5 Fig.9 th hold time D n to CP 0 −7 0 0 ns 4.5 Fig.9 th hold time S0, S1 to CP 0 −5 0 0 ns 4.5 Fig.10 th hold time D SR , DSL to CP 0 −7 0 0 ns 4.5 Fig.9 fmax maximum clock pulse frequency 30 70 24 20 MHz 4.5 Fig.7
Philips Semiconductors Product specification 4-bit bidirectional universal shift register 74HC/HCT194 AC WAVEFORMS Fig.7 Waveforms showing the clock (CP) to output (Qn) propagation delays, the clock pulse width, the output transition times and the maximum clock frequency. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.8 Waveforms showing the master reset (MR) pulse width, the master reset to output (Qn) propagation delays and the master reset to clock (CP) removal time. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.9 Waveforms showing the set-up and hold times from the data inputs (Dn, DSR and D SL) to the clock (CP). The shaded areas indicate when the input is permitted to change for predictable output performance. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. PACKAGE OUTLINES See “74HC/HCT/HCU/HCMOS Logic Package Outlines”. Fig.10 Waveforms showing the set-up and hold times from the mode control inputs (Sn) to the clock input (CP). The shaded areas indicate when the input is permitted to change for predictable output performance. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V.