74HC166 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 10

Technical content

Product specification File under Integrated Circuits, IC06 December 1990 INTEGRATED CIRCUITS 74HC/HCT166 8-bit parallel-in/serial-out shift register For a complete data sheet, please also download:

  • The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
  • The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines

Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166

FEATURES

  • Synchronous parallel-to-serial applications
  • Synchronous serial data input for easy expansion
  • Clock enable for “do nothing” mode
  • Asynchronous master reset
  • For asynchronous parallel data load see “165”
  • Output capability: standard
  • ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT166 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT166 are 8-bit shift registers which have a fully synchronous serial or parallel data entry selected by an active LOW parallel enable ( PE) input. WhenPE is LOW one set-up time prior to the LOW-to-HIGH clock transition, parallel data is entered into the register. When PE is HIGH, data is entered into the internal bit position Q0 from serial data input (Ds), and the remaining bits are shifted one place to the right (Q0 → Q1 → Q2, etc.) with each positive-going clock transition. This feature allows parallel-to-serial converter expansion by tying the Q 7 output to the Ds input of the succeeding stage. The clock input is a gated-OR structure which allows one input to be used as an active LOW clock enable (CE) input. The pin assignment for the CP andCE inputs is arbitrary and can be reversed for layout convenience. The LOW-to-HIGH transition of input CE should only take place while CP is HIGH for predictable operation. A LOW on the master reset ( MR) input overrides all other inputs and clears the register asynchronously, forcing all bit positions to a LOW state. QUICK REFERENCE DATA GND = 0 V; T amb =2 5°C; tr =tf= 6 ns Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD =C PD × VCC 2 × fi+ ∑ (CL × VCC 2 ×fo) where: fi= input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC 2 × fo) = sum of outputs C L = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI= GND to VCC For HCT the condition is VI= GND to VCC − 1.5 V

ORDERING INFORMATION

See “74HC/HCT/HCU/HCMOS Logic Package Information”. SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPHL / tPLH propagation delay CP to Q7 MR to Q7 C L = 15 pF; VCC =5 V ns ns f max maximum clock frequency 63 50 MHz C I input capacitance 3.5 3.5 pF C PD power dissipation capacitance per package notes 1 and 2 41 41 pF

Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 1D s serial data input 2, 3, 4, 5, 10, 11, 12, 14 D0 to D7 parallel data inputs

6 CE clock enable input (active LOW)

7 CP clock input (LOW-to-HIGH edge-triggered)

8 GND ground (0 V)

MR asynchronous master reset (active LOW)

13 Q 7 serial output from the last stage

15 PE parallel enable input (active LOW)

16 V CC positive supply voltage

Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.

Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166 FUNCTION TABLE Notes 1. H = HIGH voltage level h = HIGH voltage level one set-up time prior to the LOW-to-HIGH CP transition L = LOW voltage level I = LOW voltage level one set-up time prior to the LOW-to-HIGH CP transition q = lower case letters indicate the state of the referenced output one set-up time prior to the LOW-to-HIGH CP transition X = don’t care ↑ = LOW-to-HIGH CP transition OPERATING MODES INPUTS Q n REGISTER OUTPUT PE CE CP D S D 0-D7 Q 0 Q 1-Q6 Q 7 parallel load I I I I X X I- I h - h L H L - L H - H L H serial shift h h I I I h X - X X-X L H q0 - q5 q0 - q5 hold “do nothing” X h X X X - X q 0 q1 - q6 q7 Fig.4 Functional diagram.

Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166 Fig.5 Logic diagram. Fig.6 Typical clear, shift, load, inhibit, and shift sequences.

Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166 DC CHARACTERISTICS FOR 74HC For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay CP to Q7 150 190 225 ns 2.0 4.5 6.0 Fig.7 t PHL propagation delay MR to Q7 160 200 240 ns 2.0 4.5 6.0 Fig.8 t THL / tTLH output transition time 19 110 ns 2.0 4.5 6.0 Fig.7 t W clock pulse width HIGH or LOW 100 120 ns 2.0 4.5 6.0 Fig.7 t W master reset pulse width LOW 100 125 150 ns 2.0 4.5 6.0 Fig.8 t rem removal time MR to CP −19 ns 2.0 4.5 6.0 Fig.8 t su set-up time D n,CE to CP 100 120 ns 2.0 4.5 6.0 Fig.9 t su set-up time PE to CP 100 125 150 ns 2.0 4.5 6.0 Fig.8 t h hold time D n,CE to CP ns 2.0 4.5 6.0 Fig.8 t h hold time PE to CP −28 −10 ns 2.0 4.5 6.0 Fig.9 f max maximum clock pulse frequency 6.0 4.8 4.0 MHz 2.0 4.5 6.0 Fig.7

Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI Note to HCT types The value of additional quiescent supply current (ΔICC ) for a unit load of 1 is given in the family specifications. To determineΔICC per input, multiply this value by the unit load coefficient shown in the table below. INPUT UNIT LOAD COEFFICIENT D 0 to D7 D s CP CE MR PE 0.35 0.35 0.80 0.80 0.40 0.60

Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr =tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay CP to Q7 23 40 50 60 ns 4.5 Fig.7 tPHL propagation delay MR to Q7 22 40 50 60 ns 4.5 Fig.8 tTHL / tTLH output transition time 7 15 19 22 ns 4.5 Fig.7 tW clock pulse width HIGH or LOW 20 9 25 30 ns 4.5 Fig.7 tW master reset pulse width LOW 25 11 31 38 ns 4.5 Fig.8 trem removal time MR to CP 0 −7 0 0 ns 4.5 Fig.8 tsu set-up time D n,CE to CP 16 8 20 24 ns 4.5 Fig.9 tsu set-up time PE to CP 30 15 38 45 ns 4.5 Fig.8 th hold time D n,CE to CP 0 −3 0 0 ns 4.5 Fig.9 th hold time PE to CP 0 −13 0 0 ns 4.5 Fig.9 fmax maximum clock pulse width 25 45 20 17 MHz 4.5 Fig.7

Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166 AC WAVEFORMS Fig.7 Waveforms showing the clock (CP) to output (Q7) propagation delays, the clock pulse width, the output transition times and the maximum clock frequency. The changing to output assumes internal Q6 opposite state from Q7. The number of clock pulses required between the tPLH and tPHL measurements can be determined from the function table. (1) HC : V M = 50%; VI= GND to VCC . HCT: VM = 1.3V; VI= GND to 3V. Fig.8 Waveforms showing the master reset (MR) pulse width, the master reset to output (Q7) propagation delay and the master reset to clock (CP) removal time. The number of clock pulses required between the tPLH and tPHL measurements can be determined from the function table. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3V; VI= GND to 3V.

Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT166 PACKAGE OUTLINES See “74HC/HCT/HCU/HCMOS Logic Package Outlines”. Fig.9 Waveforms showing the set-up and hold times from the serial data input (Ds), the data inputs (Dn), the clock enable input (LOWCE), the clock enable inputCE and the parallel enable input to the clock (CP). The number of clock pulses required between the tPLH and tPHL measurements can be determined from the function table. CE may change only from HIGH-to-LOW while CP is LOW. The shaded areas indicate when the input is permitted to change for predictable output performance. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3V; VI= GND to 3V.