74HC165 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 10
Technical content
Product specification File under Integrated Circuits, IC06 December 1990 INTEGRATED CIRCUITS 74HC/HCT165 8-bit parallel-in/serial-out shift register For a complete data sheet, please also download:
- The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
- The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
- The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT165
FEATURES
- Asynchronous 8-bit parallel load
- Synchronous serial input
- Output capability: standard
- ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT165 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT165 are 8-bit parallel-load or serial-in shift registers with complementary serial outputs (Q 7 and Q 7) available from the last stage. When the parallel load (PL) input is LOW, parallel data from the D0 to D 7 inputs are loaded into the register asynchronously. When PL is HIGH, data enters the register serially at the D s input and shifts one place to the right (Q0 → Q 1 → Q 2, etc.) with each positive-going clock transition. This feature allows parallel-to-serial converter expansion by tying the Q 7 output to the DS input of the succeeding stage. The clock input is a gated-OR structure which allows one input to be used as an active LOW clock enable (CE) input. The pin assignment for the CP andCE inputs is arbitrary and can be reversed for layout convenience. The LOW-to-HIGH transition of input CE should only take place while CP HIGH for predictable operation. Either the CP or the CE should be HIGH before the LOW-to-HIGH transition ofPL to prevent shifting the data when PL is activated.
APPLICATIONS
- Parallel-to-serial data conversion QUICK REFERENCE DATA GND = 0 V; Tamb = 25°C; tr = tf= 6 ns Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD = CPD × VCC 2 × fi+∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC 2 × fo) = sum of outputs C L = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI= GND to VCC For HCT the condition is VI= GND to VCC − 1.5 V
ORDERING INFORMATION
See “74HC/HCT/HCU/HCMOS Logic Package Information”. SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPHL / tPLH propagation delay CP to Q7,Q 7 PL to Q7,Q 7 D 7 to Q7,Q 7 C L = 15 pF; VCC = 5 V ns ns ns f max maximum clock frequency 56 48 MHz C I input capacitance 3.5 3.5 pF C PD power dissipation capacitance per package notes 1 and 2 35 35 pF
Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT165 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION
1 PL asynchronous parallel load input (active LOW)
7 Q 7 complementary output from the last stage
9Q 7 serial output from the last stage
2 CP clock input (LOW-to-HIGH edge-triggered)
8 GND ground (0 V)
11, 12, 13, 14, 3, 4, 5, 6 D0 to D7 parallel data inputs
15 CE clock enable input (active LOW)
16 V CC positive supply voltage
Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.
Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT165 FUNCTION TABLE Note 1. H = HIGH voltage level h = HIGH voltage level one set-up time prior to the LOW-to-HIGH clock transition L = LOW voltage level I = LOW voltage level one set-up time prior to the LOW-to-HIGH clock transition q = lower case letters indicate the state of the referenced output one set-up time prior to the LOW-to-HIGH clock transition X = don’t care ↑ = LOW-to-HIGH clock transition OPERATING MODES INPUTS Q n REGISTERS OUTPUTS PL CE CP D S D 0-D7 Q 0 Q 1-Q6 Q 7 Q 7 parallel load L L X X X X X X L H L H L - L H - H L H H L serial shift H H L L l h X X L H q0-q5 q0-q5 hold “do nothing” H H X X X q 0 q1-q6 q7 q7 Fig.4 Functional diagram. Fig.5 Logic diagram.
Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT165 DC CHARACTERISTICS FOR 74HC For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI AC CHARACTERISTICS FOR HC GND = 0 V; tr = tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay CE, CP to Q7,Q 7 165 205 250 ns 2.0 4.5 6.0 Fig.6 t PHL / tPLH propagation delay PL to Q7,Q 7 165 205 250 ns 2.0 4.5 6.0 Fig.6 t PHL / tPLH propagation delay D 7 to Q7,Q 7 120 150 180 ns 2.0 4.5 6.0 Fig.6 t THL / tTLH output transition time 110 ns 2.0 4.5 6.0 Fig.6 t W clock pulse width HIGH or LOW 100 120 ns 2.0 4.5 6.0 Fig.6 t W parallel load pulse width; LOW 100 120 ns 2.0 4.5 6.0 Fig.6 t rem removal time PL to CP,CE 100 125 150 ns 2.0 4.5 6.0 Fig.6 t su set-up time D s to CP,CE 100 120 ns 2.0 4.5 6.0 Fig.6 t su set-up time CE to CP; CP to CE 100 120 ns 2.0 4.5 6.0 Fig.6 t su set-up time D n toPL 100 120 ns 2.0 4.5 6.0 Fig.6
Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT165 th hold time D s to CP,CE D n toPL ns 2.0 4.5 6.0 Fig.6 t h hold time CE to CP CP toCE −17 ns 2.0 4.5 6.0 Fig.6 f max maximum clock pulse frequency MHz 2.0 4.5 6.0 Fig.6 SYMBOL PARAMETER T amb (°C) UNIT TEST CONDITIONS 74HC VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125
Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT165 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see“74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: standard ICC category: MSI Note to HCT types The value of additional quiescent supply current (ΔICC ) for a unit load of 1 is given in the family specifications. To determineΔICC per input, multiply this value by the unit load coefficient shown in the table below. INPUT UNIT LOAD COEFFICIENT D n D s CP CE PL 0.35 0.35 0.65 0.65 0.65
Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT165 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr = tf= 6 ns; CL = 50 pF SYMBOL PARAMETER Tamb (°C) UNIT TEST CONDITIONS 74HCT VCC (V) WAVEFORMS +25 −40 to+85 −40 to+125 tPHL / tPLH propagation delay CE, CP to Q7,Q 7 17 34 43 51 ns 4.5 Fig.6 tPHL / tPLH propagation delay PL to Q7,Q 7 20 40 50 60 ns 4.5 Fig.6 tPHL / tPLH propagation delay D 7 to Q7,Q 7 14 28 35 42 ns 4.5 Fig.6 tTHL / tTLH output transition time 7 15 19 22 ns 4.5 Fig.6 tW clock pulse width HIGH or LOW 16 6 20 24 ns 4.5 Fig.6 tW parallel load pulse width; LOW 20 9 25 30 ns 4.5 Fig.6 trem removal time PL to CP,CE 20 8 25 30 ns 4.5 Fig.6 tsu set-up time D s to CP,CE 20 2 25 30 ns 4.5 Fig.6 tsu set-up time CE to CP; CP toCE 20 7 25 30 ns 4.5 Fig.6 tsu set-up time D n toPL 20 10 25 30 ns 4.5 Fig.6 th hold time Ds to CP,CE; Dn toPL 7 −1 9 11 ns 4.5 Fig.6 th hold time CE to CP, CP toCE 0 −7 0 0 ns 4.5 Fig.6 fmax maximum clock pulse frequency 26 44 21 17 MHz 4.5 Fig.6
Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT165 AC WAVEFORMS Fig.6 Waveforms showing the clock (CP) to output (Q7 or Q 7) propagation delays, the clock pulse width, the output transition times and the maximum clock frequency. The changing to output assumes internal Q6 opposite state from Q7. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.7 Waveforms showing the parallel load (PL) pulse width, the parallel load to output (Q7 orQ 7) propagation delays, the parallel load to clock (CP) and clock enable (CE) removal time. The changing to output assumes internal Q6 opposite state from Q7. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.8 Waveforms showing the data input (Dn) to output (Q7 orQ 7) propagation delays whenPL is LOW. (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V.
Philips Semiconductors Product specification 8-bit parallel-in/serial-out shift register 74HC/HCT165 PACKAGE OUTLINES See “74HC/HCT/HCU/HCMOS Logic Package Outlines”. Fig.9 Waveforms showing the set-up and hold times from the serial data input (Ds) to the clock (CP) and clock enable (CE) inputs, from the clock enable input (CE) to the clock input (CP) and from the clock input (CP) to the clock enable input (CE). CE may change only from HIGH-to-LOW while CP is LOW. The shaded areas indicate when the input is permitted to change for predictable output performance. (1) HC : V M = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V. Fig.10 Waveforms showing the set-up and hold times from the data inputs (Dn) to the parallel load input (PL). (1) HC : VM = 50%; VI= GND to VCC . HCT: VM = 1.3 V; VI= GND to 3 V.