Download PDF74HC164
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 10
Technical content
Features
Wide Supply Voltage Range from 2.0V to 6.0V Sinks or Sources 4mA at VCC = 4.5V CMOS Low Power Consumption Schmitt Trigger Action at all Inputs ESD Protection Exceeds JESD 22 200-V Machine Model (A115) 2000-V Human Body Model (A114) Exceeds 1000-V Charged Device Model (C101) Range of Package Options SO-14 and TSSOP-14 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Pin Assignments DSA DSB MR Vcc ( Top View ) SO-14 / TSSOP-14 / PDIP-14 GND CP
Applications
General Purpose Logic Wide Array of Products Such as: PCs, Networking, Notebooks, Netbooks Computer Peripherals, Hard Drives, CD/DVD ROM TV, DVD, DVR, Set-Top Box Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. Device Ordering Information is on Page 7
Document number: DS36279 Rev. 2- 2 2 of 10 www.diodes.com March 2015 © Diodes Incorporated 74HC164 400 NEW PRODUCT NEW PRODUCT Pin Descriptions Function Table (Note 4) Mode Input Output MR CP DSA DSB Q0 Q1-Q7 Reset L X X X L L Shift H ↑ L X L Qn←Qn-1 (n= 1 to7) H ↑ X L L Qn←Qn-1 (n= 1 to7) H ↑ H H H Qn←Qn-1 (n= 1 to7) Note: 4. Signals asserted on DSA and DSB must be in place longer than Tsu (set-up time) before CP occurs and remain in place Thold (hold time) after CP. Logic Diagram 9MR 8CP D C R Q D C R Q D C R Q D C R Q D C R Q D C R Q D C R Q D C R Q 2DSB 1DSA Pin Number Pin Name Function
1 DSA Serial Data Input
2 DSB Serial Data Input
3 Q0 Data Output
4 Q1 Data Output
5 Q2 Data Output
6 Q3 Data Output
7 GND Ground
8 CP Clock Pulse –Positive Edge Triggered
MR Master Reset - Asynchronous
10 Q4 Data Output
11 Q5 Data Output
12 Q6 Data Output
13 Q7 Data Output
14 VCC Supply Voltage
Document number: DS36279 Rev. 2- 2 3 of 10 www.diodes.com March 2015 © Diodes Incorporated 74HC164 400 NEW PRODUCT NEW PRODUCT Timing Diagram CP DSA MR unknown 1312 151498 111054 7610 32 DSB unknown unknown unknown unknown unknown unknown unknown Reset All Q=0 Reset All Q=0 Notes: 5. All Q values are reset to LOW when MR goes low. MR is asynchronous and overrides all other signals. 6. Serial data supplied at DSA and DSB is ANDED and transferred to Q0 on positive edge of CP. Absolute Maximum Ratings (Note 7) (TA = +25°C, unless otherwise specified.) Symbol Description Rating Unit ESD HBM Human Body Model ESD Protection 2 kV ESD CDM Charged Device Model ESD Protection 1 kV ESD MM Machine Model ESD Protection 200 V VCC Supply Voltage Range -0.5 to +7.0 V VI Input Voltage Range (Note 8) -0.5 to +7.0 V IIK Input Clamp Current VI < -0.5V or Vi > VCC +0.5V ±20 mA IOK Output Clamp Current VO < -0.5V or VO > VCC +0.5V ±20 mA IO Continuous Output Current -0.5V < VO VCC +0.5V +/- 25 mA ICC Continuous Current through Vcc 50 mA IGND Continuous Current through GND -50 mA TJ Operating Junction Temperature -40 to +150 °C TSTG Storage Temperature -65 to +150 °C PTOT Total Power Dissipation 500 mW Notes: 7. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and devi ce operation should be within recommend values. 8. Input Voltage cannot exceed Vcc to the extent the maximum clamp current is exceeded.
Document number: DS36279 Rev. 2- 2 4 of 10 www.diodes.com March 2015 © Diodes Incorporated 74HC164 400 NEW PRODUCT NEW PRODUCT Recommended Operating Conditions (Note 9) (TA = +25°C, unless otherwise specified.) Symbol Parameter Conditions Min Max Unit VCC Supply Voltage 2.0 6.0 V VI Input Voltage 0 VCC V VO Output Voltage 0 VCC V Δt/ΔV Input Transition Rise or Fall Rate VCC = 2.0V 625 ns/V VCC = 4.5V 140 VCC = 6.0V 85 TA Operating Free-Air Temperature -40 +125 °C Note: 9. Unused inputs should be held at VCC or Ground. Electrical Characteristics (TA = +25°C, unless otherwise specified.) Symbol Parameter Test Conditions VCC TA = +25°C TA = -40°C to +85°C TA = -40°C to +125°C Unit VIH High-level Input Voltage VIL Low-level Input Voltage VOH High-level Output Voltage V VOL Low-level Output Voltage IOL = 20μA 2.0V 0 0.1 0.1 0.1 V IOL = 20μA 4.5V 0 0.1 0.1 0.1 IOL = 20μA 6.0V 0 0.1 0.1 0.1 II Input Current VI =GND or ICC Supply Current VI = GND or VCC, IO = 0A 6.0V 8.0 80 160 μA
Document number: DS36279 Rev. 2- 2 5 of 10 www.diodes.com March 2015 © Diodes Incorporated 74HC164 400 NEW PRODUCT NEW PRODUCT Switching Characteristics Symbol / Parameter Pins Test Conditions VCC TA = +25°C -40°C to +85°C -40°C to +125°C Unit Min Typ. Max Min Max Min Max fMAX Maximum Frequency CP Figure 1
2.0 V 6 23 5 4
4.5 V 30 71 24 20
6.0 V 35 85 28 24
2.0 V 80 14 100 120
ns 4.5 V 16 5 20 24
6.0 V 14 4 17 20
2.0 V 60 17 75 90
ns 4.5 V 12 6 15 18 6.0 V 10 5 13 15 tSU Set-up Time DSA or DSB to CP Figure 1
2.0 V 60 8 75 90
ns 4.5 V 12 3 15 18
6.0 V 10 2 13 15
2.0 V 4 -6 4 4
ns 4.5 V 4 -2 4 4
6.0 V 4 -2 4 4
2.0 V 41 170 215 255
4.5 V 15 34 43 51
6.0 V 12 29 37 43
ns 4.5 V 12 6 15 18
6.0 V 10 5 13 15
2.0 V 39 140 175 210
4.5 V 14 28 35 42
6.0 V 11 24 30 36
2.0 V 19 75 95 110
ns 4.5 V 7 15 19 22
6.0 V 6 13 16 19
Operating Characteristics (@TA = +25°C, unless otherwise specified.) Parameter Test Conditions VCC = 6V Unit Typ Cpd Power Dissipation Capacitance per Gate f = 1 MHz 40 pF CI Input Capacitance VI = VCC – or GND 3.5 pF
Document number: DS36279 Rev. 2- 2 6 of 10 www.diodes.com March 2015 © Diodes Incorporated 74HC164 400 NEW PRODUCT NEW PRODUCT Parameter Measurement Information From Output CL (see Note A) Under Test VCC Inputs VM CL VI tr/tf 2.0V VCC 6ns VCC/2 50pF 4.5V VCC 6ns VCC/2 50pF 5.0V VCC 6ns VCC/2 15pF 6.0V VCC 6ns VCC/2 50pF Input tW VM VM Vl 0 V trec 1/fMAX MR Data Input tSU VM VM th VMTiming Input VCC VCC Voltage Waveform Pulse Duration and Recovery Time Voltage Waveform Set-up and Hold Times Input VM VM Vl 0 V tPHLtPLH tPHL VM VM VM tPLH VOH VOL VOH VOL Output Output VM Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤10 Hz. C. Inputs are measured separately, one transition per measurement. D. tPLH and tPHL are the same as tPD. E. Transition times tt, ttlh, tthl are measured from the 10% to 90% or 90% to 10% of the appropriate waveform. Figure 1 Load Circuit and Voltage Waveforms
Document number: DS36279 Rev. 2- 2 7 of 10 www.diodes.com March 2015 © Diodes Incorporated 74HC164 400 NEW PRODUCT NEW PRODUCT
Ordering Information
74 HC 164 XXX - 13
-13 : PackingLogic Device 74 : Logic Prefix HC : 2.0V to 6.0V Family 164: 8-Bit Serial In Parallel Out Tape & Reel13" Package S14 : SO-14 T14 : TSSOP-14 Shift Register D14 : PDIP-14 Device Package Code Packaging Packing Quantity Part Number Suffix 74HC164S14-13 S14 SO-14 2,500/Tape & Reel -13 74HC164T14-13 T14 TSSOP-14 2,500/Tape & Reel -13 74HC164D14 D14 PDIP-14 TUBE No Suffix Marking Information (1) SO-14, TSSOP-14, PDIP-14 ( Top View ) YY WW X X Logo Part Number WW : Week : 01~52; 52 YY : Year : 08, 09,10~ X represents 52 and 53 week ( Top View ) 74HC164 YY WW X X Logo Part Number WW : Week : 01~52; 52 YY : Year : 08, 09,10~ X represents 52 and 53 week : Internal Codes Part Number Package 74HC164S14-13 SO-14 74HC164T14-13 TSSOP-14 74HC164D14 PDIP-14
Document number: DS36279 Rev. 2- 2 8 of 10 www.diodes.com March 2015 © Diodes Incorporated 74HC164 400 NEW PRODUCT NEW PRODUCT Package Outline Dimensions (All dimensions in mm.) Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. Package Type: SO-14 Package Type: TSSOP-14 Package Type: PDIP-14 SO-14 Dim Min Max A 1.47 1.73 A1 0.10 0.25 A2 1.45 Typ B 0.33 0.51 D 8.53 8.74 E 3.80 3.99 e 1.27 Typ H 5.80 6.20 L 0.38 1.27 0 8 All Dimensions in mm TSSOP-14 Dim Min Max a1 7° (4X) a2 0 8° A 4.9 5.10 B 4.30 4.50 C 1.2 D 0.8 1.05 F 1.00 Typ F1 0.45 0.75 G 0.65 Typ K 0.19 0.30 L 6.40 Typ All Dimensions in mm PDIP-14 Dim Min Max A 3.710 4.310 A1 0.510 - A2 3.200 3.600 B 0.380 0.570 B1 1.524 (BSC) c 0.204 0.360 D 18.800 19.200 E 6.200 6.600 E1 7.320 7.920 E2 8.400 9.000 e 2.540 (BSC) L 3.000 3.600 All Dimensions in mm E H AA2 e D L Gauge Plane Detail “A” Detail “A” 7°(4x) B G L A K a1 D C F Pin# 1 Indent Detail ‘A’ Detail ‘A’ 0.25 Gauge Plane Seating PlaneB B1 B A2A L E D c e
Document number: DS36279 Rev. 2- 2 9 of 10 www.diodes.com March 2015 © Diodes Incorporated 74HC164 400 NEW PRODUCT NEW PRODUCT Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. Package Type: SO-14 Package Type: TSSOP-14 Dimensions Value (in mm) X 0.60 Y 1.50 C1 5.4 C2 1.27 Dimensions Value (in mm) X 0.45 Y 1.45 C1 5.9 C2 0.65 X Y X Y
Document number: DS36279 Rev. 2- 2 10 of 10 www.diodes.com March 2015 © Diodes Incorporated 74HC164 400 NEW PRODUCT NEW PRODUCT IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license unde r its patent or trademark rights, nor the rights of others. Any Customer or user of t his document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diod es Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application , Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product nam es and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided i n the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support d evices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety -critical, life support devices or systems, notwithstanding any devices - or systems -related information or support that may be provided by Diodes In corporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2015, Diodes Incorporated www.diodes.com