TC74HC14AP TOSHIBA
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 6
Technical content
TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TC74HC14AP, TC74HC14AF, TC74HC14AFN HEX SCHMITT INVERTER (Note) The JEDEC SOP (FN) is not available in Japan. The TC74HC14A is a high speed CMOS SCHMITT INVERTER fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent = LSTTL while maintaining the CMOS low power dissipation. Ro / Pin configuration and function are the same as the 14 at \\ TC74HCO04A but the inputs have 25% Vcc hysteresis and vie with its schmitt trigger function, the TC74HC14A can be used as aline receivers which will receive slow input signals. huoant Gabe tipo, All inputs are equipped with protection circuits against static ant: 0.989 (Typ. discharge or transient excess voltage. ——_ 8 Kt FEATURES: Es NF ¢ High Speeds ted = 11ns(typ.) at Voc = 5V 1 1 « Symmetrical Output Impedance-| lon | =loL = 4mA(Min.) + Balanced Propagation Delays: toLH=tpHL wai 14 Vcc « Wide Operating Voltage Range---- Vcc (opr.) = 2V~6V 1Y2 LY H 13 6A « Pin and Function Compatible with 74LS14 237 WV H 12 6y 2Y 4 LY p] 11 5A SYSTEM DIAGRAM, WAVEFORM 3A 5 J W [] 10 5Y 3Y 6 LY i1]9 4A Vu Vp (TOP VIEW) Vin (A) _ofeelyerf ' ' Vw TRUTH TABLE i H Vour (Y) IEC LOGIC SYMBOL eg a en oo ey a ee 24 sy a OR 1 2001-05-17
PARAMETER VALUE UNIT | ssoomW in the range of Ta= Supply Voltage Range ~ 40°C~65°C, From Ta=65°C foc input Voitage | Vin | —05=Vecx05 | _v_] 85°C a deinting facts of DC Input Voltage Vin 0.5~Vec + 0.5 Vv ~ {omW/°C shall be applied DC Output Voltage =0.5~Vec 0.5 until 300mW. DC Output Current DC Vec/Ground Current | tec [| #50 | ma_ [Power Dissiation | Pp | S00(DIPF/ 180 S0P) Storage Temperature —65~150 RECOMMENDED OPERTING CONDITIONS PARAMETER VALUE UNIT Supply Voltage [ve [6 «dv _—+d Input Voltage Output Voltage Operating Temperature —40~85 DC ELECTRICAL CHARACTERISITCS PARAMETER __|sywgou TEST CONDITION Voc 725 25°C 3 40 85°C ir (5 [an, [1¥P. [max] win. [ Max, 7 2.0] 10 | 1.25] 150] 10 | 1.50 fositive Threshold Vp 45|23 | 270] 315| 23 | 315 | v : 2.0] 030] 065/09 | 030 | 09 Vegative Threshold) y, 45| 113] 160] 20 | 013 | 20 | v 9 6.0| 1.50 | 230 | 26 | 1.50 | 26 20/03 |o6 [10 | 03 | 10 Hysteresis Voltage Vu 45] 0.6 1.1 14 0.6 14 Vv 60/08 | 12 | 17 | os | 17 20/19 | 2.0 19 7 lon=—20xA | 45] 44 | 45 44 High Level _ Output Voltage Vou Vin= Vin 6.0 | 5.9 | 60 5.9 v low = —5.2mA 5.68 | 5.80 5.63 2.0 0.0 | 0.1 lor = 202A 45 0.0 | 0.1 Low-Level _ Output Voltage Vou Vin=Vin 6.0 0.0 | 0.1 Vv lo=4_mA 0.17 | 0.26 0.33 [npwtastageGrent [iw | VasVeorsnd [eof — | - [#01] — [#10] Vin= Vcc or GND [eof = | - [io [ = [roo |” 2 2001-05-17
AC ELECTRICAL CHARACTERISTICS ( C, = 15pF, Vcc=5V, Ta= 25°C, Input t,=t;=6ns) THE - - town Propagation Delay Time t 11 21 PHL AC ELECTRICAL CHARACTERISTICS ( C, = 50pF, Input t, = t;=6ns) Ta = 25°C Ta =-40~85°C ParaMeTsR TEST CONDITION [Wee(WI| MIN [ TYP. [ MAX. | min, | max. |UNT t 2.0 30 75 95 Output Transition Time Piled 45 8 15 19 THE 6.0 7 13 16 t 2.0 42 125 155 Propagation Delay Time te. 45 14 25 31 PHL 6.0 12 21 26 Power Dissiation Capackance| Got) | | — | 2 |- [|-|-1° Note (1) Cpp is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: Icc (opr) = Cen + Vc * fin +Icc/ 6 ( per Gate ) 3 2001-05-17
DIP 14PIN PACKAGE DIMENSIONS ( DIP14-P-300-2.54) Unit in mm 1 8 % | og = e- g Soo s sss — yf ___19.75uax 19.2540.2 Wy i a) 8 yee =]. | —s ‘° 2.0051¥P, {420.1 05:0. ea asTy re] 0.25G Weight : 0.96g (Typ.) SOP 14PIN (200mil BODY ) PACKAGE DIMENSIONS ( SOP14-P-300-1.27 ) Unit in mm 14 8 af a ; 1 7 10.8MAX. 10.320.2 a x Fa 2 = 2 “3 3. Py 0.80.2 Weight : 0.18g (Typ.) 4 2001-05-17
SOP 14PIN (150mil BODY ) PACKAGE DIMENSIONS (SOL14-P-150 -1.27) Unit in mm (Note) This package is not available in Japan. 14 8 HH H HHH =e al a s| 6 HH HEE >) 1 7 O.515TYP_ 0.42=0.07 So25G) 8.6520.1 x Pea § 3 S 0.7403 Weight : 0.12g (Typ.) 5 2001-05-17
RESTRICTIONS ON PRODUCT USE 00070768 @ TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. @ The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. @ The products described in this document are subject to the foreign exchange and foreign trade laws. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 6 2001-05-17